Posted 12 December 2020 - 09:43
Also what is the reason for making the proc files writable?
It was read-only first then I changed it for https://forums.openp...dpost&p=1284210 but still with no luck, binary can't write to the proc file ...
The proc is 644 on the files system, but there is nothing in the .ko file to handle that.
Posted 12 December 2020 - 11:47
So, obviously, we can't all have procs with file addresses that contain "openvision"... we need something universal.
So my suggestion is we have something like /proc/hardware/<whatever>
Edited by Huevos, 12 December 2020 - 11:48.
Posted 12 December 2020 - 14:05
Is that data available irrespective of the currently running kernel?
Yes it's the beauty of "modinfo" command 
So, obviously, we can't all have procs with file addresses that contain "openvision"... we need something universal.
So my suggestion is we have something like /proc/hardware/<whatever>
Also what is the reason for making the proc files writable?
It was read-only first then I changed it for https://forums.openp...dpost&p=1284210 but still with no luck, binary can't write to the proc file ...
The proc is 644 on the files system, but there is nothing in the .ko file to handle that.
I changed it: https://github.com/O...rocfs_main.c#L3
Edited by Persian Prince, 12 December 2020 - 14:14.
Open Vision sources: https://github.com/OpenVisionE2
Posted 12 December 2020 - 14:23
Edited by Huevos, 12 December 2020 - 14:24.
Posted 12 December 2020 - 14:35
Posted 12 December 2020 - 15:09
Open Vision sources: https://github.com/OpenVisionE2
Posted 12 December 2020 - 15:24
"distro" cannot be in the filepath/directory name as that means there is no standard location. The location and names must be uniform across all images.
Use something universal and unlikely to be used by a manufacturer. Perhaps: "enigma2proc", "e2proc", "e2imageproc".
Posted 12 December 2020 - 16:21
Ok lets check what modinfo shows to you
Copy these .ko files to your /tmp on your device and don't care which architecture you have.
Then:
cd /tmp modinfo h9.ko modinfo dm800se.ko
Open Vision sources: https://github.com/OpenVisionE2
Posted 12 December 2020 - 16:41
Ok lets check what modinfo shows to you
Copy these .ko files to your /tmp on your device and don't care which architecture you have.
Then:
modinfo h9.ko modinfo dm800se.ko
Not every receiver has the fake driver files.
Please spell out your point instead of being suggestive as that can be open to misintepretation.
Edited by Abu Baniaz, 12 December 2020 - 16:54.
Posted 12 December 2020 - 16:57
Ok lets check what modinfo shows to you
Copy these .ko files to your /tmp on your device and don't care which architecture you have.
Then:
cd /tmp modinfo h9.ko modinfo dm800se.ko
Forgot to attach the zip, sorry.
Open Vision sources: https://github.com/OpenVisionE2
Posted 12 December 2020 - 17:04
Hi Persian Prince,
Here are the results of running this on my GigaBlue UHD UE 4K box.
> modinfo h9.ko filename: /tmp/h9.ko version: 10.2-r291 description: Open Vision information module model=h9 brand=airdigital platform=zgemmahisi3798mv200 visionversion=10.2 visionrevision=r291 visionlanguage=extralanguage developername=persianpros feedsurl=http://openvision/feeds/openvision-develop distro=openvision oe=master kernel=4.4.35 python=2.7.18 mediaservice=enigma2-plugin-systemplugins-servicehisilicon multilib=False architecture=cortexa15hf-neon-vfpv4 socfamily=hisi3798mv200 blindscanbinary=blindscan rctype=28 rcname=zgemma6 rcidnum=1 smallflash=False middleflash=False imagedir=h9 imagefs= ubi mtdbootfs= mtdrootfs=mtd7 mtdkernel=mtd6 rootfile=rootfs.ubi kernelfile=uImage mkubifs=-m 2048 -e 126976 -c 8192 ubinize=-m 2048 -p 128KiB forcemode=no author: Open Vision developers license: GPL srcversion: 4B05490988D85BCF31590A3 depends: vermagic: 4.4.35 SMP mod_unload ARMv7 p2v8
> modinfo dm800se.ko filename: /tmp/dm800se.ko version: 7.5-r221 description: Open Vision information module model=dm800se brand=dreambox platform=dm1gen visionversion=7.5 visionrevision=r221 visionlanguage=english developername=persianpros feedsurl=http://openvision/feeds/openvision-develop distro=openvision oe=pyro kernel=3.2 python=2.7.13 mediaservice=enigma2-plugin-systemplugins-servicemp3 multilib=False architecture=mips32el socfamily=bcm7405 blindscanbinary=blindscan rctype=0 rcname=dmm1 rcidnum=2 smallflash=True middleflash=True imagedir=dm800se imagefs=jffs2 mtdbootfs= mtdrootfs= mtdkernel=mtd2 rootfile= kernelfile= mkubifs=-m 512 -e 15KiB -c 3798 -x favor_lzo -X 1 -F -j 4MiB ubinize=-m 512 -p 16KiB -s 512 forcemode=no author: Open Vision developers license: GPL srcversion: DD4E4310E9ADC9FCC724DA2 depends: vermagic: 3.2-dm800se SMP mod_unload MIPS32_R1 32BIT
Regards,
Ian.
Posted 12 December 2020 - 17:06
Great!
Now we could read what's needed from a parent image even if the architecture is different
Static data, compiled .ko file so no code change is possible 
Open Vision sources: https://github.com/OpenVisionE2
Posted 12 December 2020 - 18:29
Ok lets check what modinfo shows to you
Copy these .ko files to your /tmp on your device and don't care which architecture you have.
Then:
modinfo h9.ko modinfo dm800se.ko
Not every receiver has the fake driver files.
Please spell out your point instead of being suggestive as that can be open to misintepretation.
There are no fake drivers. The point was you can put the file anywhere and run "modinfo /the/file/location" and it returns anything that is here:
MODULE_AUTHOR("Open Vision developers");
MODULE_DESCRIPTION("Open Vision information");
Edited by Huevos, 12 December 2020 - 18:31.
Posted 12 December 2020 - 18:33
"distro" cannot be in the filepath/directory name as that means there is no standard location. The location and names must be uniform across all images.
Use something universal and unlikely to be used by a manufacturer. Perhaps: "enigma2proc", "e2proc", "e2imageproc".
What is wrong with "hardware". And why would you want "proc" in the name at all? It is obvious it is a proc because it is in the proc file system. And also "enigma2" is firmware. This outputs hardware info.
Edited by Huevos, 12 December 2020 - 18:35.
Posted 12 December 2020 - 19:04
Great!
Now we could read what's needed from a parent image even if the architecture is different
Static data, compiled .ko file so no code change is possible
And if we are to do that the ".ko" can't be named "openvision.ko". Has to be the same name on all distros.
Posted 12 December 2020 - 19:23
I know that for sure.
Guys these are just samples and what we (Open Vision) use, the final naming would be a group decision.
I think I wrote this in each page ...
Open Vision sources: https://github.com/OpenVisionE2
Posted 12 December 2020 - 20:38
"distro" cannot be in the filepath/directory name as that means there is no standard location. The location and names must be uniform across all images.
Use something universal and unlikely to be used by a manufacturer. Perhaps: "enigma2proc", "e2proc", "e2imageproc".
What is wrong with "hardware". And why would you want "proc" in the name at all? It is obvious it is a proc because it is in the proc file system. And also "enigma2" is firmware. This outputs hardware info.
The data is being added by an Enigma2 distro build process ( hopefully agreed by everyone), nothing intrinsic with the hardware (by manufacturer).
There are no fake drivers.
As if some manufacturers do not put a fake box model in the drivers!
ROFL
Posted 12 December 2020 - 20:40
Hi,
I think what Persian Prince is trying to suggest is the solution to the information problem. The name was not high on his considerations (yet). His test code was probably called called "openvision.ko" because he is a developer on OpenVision. If it makes it easier for you to digest let's assume that the code will be called "enigma2.ko" and it will always be located in ""/lib/modules/kernelversion/kernel/drivers/". Thus any code in any image that wants to know about any image in any slot simply needs to find "/lib/modules/kernelversion/kernel/drivers/enigma2.ko".
Regards,
Ian.
Posted 12 December 2020 - 20:55
If the proc file is going to be used for detecting hardware, it should just contain hardware specific data.
The distro data should be in another file.
"/lib/modules/kernelversion/kernel/drivers/".
IMO, you cannot use this location because it is not a static path. The receivers have different kernel versions.
Edited by Abu Baniaz, 12 December 2020 - 20:56.
Posted 12 December 2020 - 21:27
How about?
/proc/hardware_data.ko
(for hardware data that distros put there)
/proc/enigma2_data.ko
(for enigma data, distro name, type, version, url, build data etc. Several images already use /etc/image-version)
Edited by Abu Baniaz, 12 December 2020 - 21:29.
0 members, 16 guests, 0 anonymous users
