Jump to content


Photo

OpenPLi 7.3 Release available.

release

  • Please log in to reply
229 replies to this topic

#1 Frenske

  • Forum Moderator
    PLi® Core member
  • 23,996 posts

+240
Excellent

Posted 15 July 2020 - 06:34

Today the OpenPLi 7.3 release version is finally available to the users.

Models that now work with the OpenPLi 7.2 release will be automatically upgraded to the 7.3 version with a software update. It is not unwise to always have a good backup available so in case you experience issues you will quickly have a working configuration if you have performed an online flash and restored the last working backup.

 

The 7.3 release candidate, including the plugin feeds, are already removed from our download servers.

 

The releasenotes are online.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
Als jij van mening bent dat ik jou goed geholpen heb, dan kan je dit laten blijken door op het groene pijltje te drukken in mijn laatste antwoord.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: OpenPLi 7.3 Release available. #2 nor50

  • Senior Member
  • 408 posts

+1
Neutral

Posted 15 July 2020 - 11:43

531 files in upgrade now... ;-)


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 7.3


Re: OpenPLi 7.3 Release available. #3 nor50

  • Senior Member
  • 408 posts

+1
Neutral

Posted 15 July 2020 - 11:52

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 7.3


Re: OpenPLi 7.3 Release available. #4 Taykun345

  • Senior Member
  • 1,231 posts

+35
Good

Posted 15 July 2020 - 11:57

I did upgrade from 7.2 on Duo4k, box booted fine. Softcam startup didnt change. I noticed new plugin for Oscam.

Udpxy port changed back to default, had to edit it again. Havent noticed anything else, yet.


Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: OpenPLi 7.3 Release available. #5 kalehrl

  • Senior Member
  • 419 posts

+7
Neutral

Posted 15 July 2020 - 12:01

My display no longer shows time, just channel number.

Only when I put my receiver (Zgemma H7S) into standby is the time shown.



Re: OpenPLi 7.3 Release available. #6 40H3X

  • PLi® Contributor
  • 3,919 posts

+123
Excellent

Posted 15 July 2020 - 12:10

My display no longer shows time, just channel number.

Only when I put my receiver (Zgemma H7S) into standby is the time shown.

Go to menu -> Setup -> System -> Expert settings - Display setup  select standby en move the bar to the right.


Hardware: Vu+ Uno 4k SE - HDD 500GB 2.5 inch - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OScam - Settings van Hans  -  Autotimer  -  EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki.

 

 


Re: OpenPLi 7.3 Release available. #7 Kaizoku

  • Senior Member
  • 42 posts

+5
Neutral

Posted 15 July 2020 - 12:24

I did an usb flash but the sf8008 always stuck at boot.
Same when installing the multiboot build from recovery's usb multiboot upgrade.
The slot that contain pli 7.3 always stuck at bootlogo, other slots are booting.

Edited by Kaizoku, 15 July 2020 - 12:27.


Re: OpenPLi 7.3 Release available. #8 Frenske

  • Forum Moderator
    PLi® Core member
  • 23,996 posts

+240
Excellent

Posted 15 July 2020 - 12:48

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

If you have loaded both CCcam and Oscam the default cam after startup is indeed CCcam. This is known.

Just change it manually to Oscam.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
Als jij van mening bent dat ik jou goed geholpen heb, dan kan je dit laten blijken door op het groene pijltje te drukken in mijn laatste antwoord.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: OpenPLi 7.3 Release available. #9 Frenske

  • Forum Moderator
    PLi® Core member
  • 23,996 posts

+240
Excellent

Posted 15 July 2020 - 12:59

@Kaizoku

 

I just flashed the sf8008 and can confirm that something goes wrong. The reason will have to be investigated. It might be that the latest changes in the BSP might have caused this.

I still had a 7.3.RC in slot 1 and this works Ok.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
Als jij van mening bent dat ik jou goed geholpen heb, dan kan je dit laten blijken door op het groene pijltje te drukken in mijn laatste antwoord.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: OpenPLi 7.3 Release available. #10 Kaizoku

  • Senior Member
  • 42 posts

+5
Neutral

Posted 15 July 2020 - 13:01

Thanks for confirmation Frenske.

Re: OpenPLi 7.3 Release available. #11 kalehrl

  • Senior Member
  • 419 posts

+7
Neutral

Posted 15 July 2020 - 14:32


My display no longer shows time, just channel number.
Only when I put my receiver (Zgemma H7S) into standby is the time shown.

Go to menu -> Setup -> System -> Expert settings - Display setup select standby en move the bar to the right.
Thanks but it didn't help. The setting only changes the display brightness. I restarted enigma2 but still the same. It's not a skin issue because I changed it but still just get the channel number when the receiver is on.

Re: OpenPLi 7.3 Release available. #12 p.rodrigues

  • Senior Member
  • 25 posts

0
Neutral

Posted 15 July 2020 - 15:27

No problem with the online update from 7.2 to 7.3 in Uno 4K Se and Duo 4K.

 

Tanks OPLI.


Vu+ Duo 4K (DVB-S2X FBC + MTISF) - Uno 4K SE (DVB-S2 FBC + Xbox USB Tuner) - 2x Vu+ Zero 4K (DVB-S2X + Vu+ USB Turbo Tuner) - 13E, 19.2E, 30W & ONT/Meo


Re: OpenPLi 7.3 Release available. #13 WanWizard

  • Forum Moderator
    PLi® Core member
  • 53,852 posts

+1,071
Excellent

Posted 15 July 2020 - 16:32

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

 

Then you have installed them both (why?), and C comes before O.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), Octagon SF8008 (S2+T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: OpenPLi 7.3 Release available. #14 WanWizard

  • Forum Moderator
    PLi® Core member
  • 53,852 posts

+1,071
Excellent

Posted 15 July 2020 - 16:39

I did an usb flash but the sf8008 always stuck at boot.
Same when installing the multiboot build from recovery's usb multiboot upgrade.
The slot that contain pli 7.3 always stuck at bootlogo, other slots are booting.

 

For the Octagon SF8008 and SF8008 mini, Gigablue Trio 4K and uClan Usystm:

 

These boxes have and old and a new multiboot partition format. These are not compatible. Which format you have depends on which image you have flashed.

 

So, if you have flashed OpenPLi 7.2 (old format), 7.3 in multiboot will not boot, and neither will the latest ATV etc. If you have flashed the latest ATV (new format), OpenPLi 7.2 in multiboot will not boot. And so on...


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), Octagon SF8008 (S2+T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: OpenPLi 7.3 Release available. #15 ims

  • PLi® Core member
  • 12,146 posts

+185
Excellent

Posted 15 July 2020 - 16:46

My display no longer shows time, just channel number.

Only when I put my receiver (Zgemma H7S) into standby is the time shown.

It is right. For time you have watch on hand or wall... Box should display channel number when is not in standby. If you want change it, change

"Number" to "Clock" in /usr/share/enigma2/display/skin_default/skin_display.xml

 

 

Or you can put one of this uploaded files (depending on which skin you use) to /etc/enigma2/ and restart GUI.

 

 

For different skin name you can rename it to skin_user_usedskinname.xml, where usedskinname is name of your skin.

Attached Files


Edited by ims, 15 July 2020 - 16:47.

Kdo nic nedělá, nic nezkazí!

Re: OpenPLi 7.3 Release available. #16 Kaizoku

  • Senior Member
  • 42 posts

+5
Neutral

Posted 15 July 2020 - 16:48

I did flash the final 7.3 release by usb and get stuck at splashcreen and boot in the front display.
I did not install any old multiboot image.

The same problem did occurs to atv team with their 11-07 build of 6.5 image... and captain said this: "i build later a new image i have revert the change this broke load kernel modules"

https://www.opena.tv...html#post445715

Re: OpenPLi 7.3 Release available. #17 kalehrl

  • Senior Member
  • 419 posts

+7
Neutral

Posted 15 July 2020 - 18:16

It is right. For time you have watch on hand or wall... Box should display channel number when is not in standby. If you want change it, change

"Number" to "Clock" in /usr/share/enigma2/display/skin_default/skin_display.xml

 

This certainly wasn't the case in previous openpli images.

If I remember correctly, when the box was ON, time and channel number would alternate from time to time.

I prefer this behaviour than fixed channel number when the box is ON.



Re: OpenPLi 7.3 Release available. #18 WanWizard

  • Forum Moderator
    PLi® Core member
  • 53,852 posts

+1,071
Excellent

Posted 15 July 2020 - 18:16

There is no reference to what was reverted by Captain, and nothing in the repo commits too...


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), Octagon SF8008 (S2+T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: OpenPLi 7.3 Release available. #19 nor50

  • Senior Member
  • 408 posts

+1
Neutral

Posted 15 July 2020 - 18:17

 

Don't know if it important, but after upgrade it changed from OSCAM to CCCam at start-up.

 

Then you have installed them both (why?), and C comes before O.

 

But default cam before update should be the same after in my opinion.


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 7.3


Re: OpenPLi 7.3 Release available. #20 WanWizard

  • Forum Moderator
    PLi® Core member
  • 53,852 posts

+1,071
Excellent

Posted 15 July 2020 - 18:17

Technically not possible at the moment, E2 is designed for one softcam.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), Octagon SF8008 (S2+T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H (T2+fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 






Also tagged with one or more of these keywords: release

5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users