355 replies to this topic

[ccs]

.... a settings backup before updating would have made life a lot easier.

[kermith]

.... a settings backup before updating would have made life a lot easier.

Yeah, learned it after the update. Thanks for the tip!

Sent from my SM-T865 using Tapatalk

[ccs]

.... also mentioned in post #1 in this thread.

[Dorfkind]

The plugins TVSpielfilm and Merlin Program Guide do not show any transmissions. Just black...

Hence its a problem with two different plugins, I suspect something in 7.3

What can I test? Normal EPG seems ok

 

Thx

[dudule22]

Openpli crashes in mode "moving channels". Same problem in "moving channels groups"

 

On DUO4K.

Attached Files

•  enigma2_crash_1597246723.log   4.12KB   5 downloads

[WanWizard]

Crash somewhere low level:
 

Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0xA1964]
/lib/libc.so.6(__default_rt_sa_restorer) [0xB6CB33D0]
/lib/libc.so.6(gsignal) [0xB6CB21CC]
/lib/libc.so.6(abort) [0xB6CB3530]
/usr/lib/libstdc++.so.6(_ZN9__gnu_cxx27__verbose_terminate_handlerEv) [0xB6333DF4]
/usr/lib/libstdc++.so.6(n/a) [0xB6331BF4]
-------FATAL SIGNAL

 

[Dorfkind]

It crashes if I access any settings belonging to the GUI, System GUI etc...

See attached

 

What can I do? Maybe it solves my other problem, too

Attached Files

•  enigma2_crash_1597425140.log   19.25KB   9 downloads
•  enigma2_crash_1597425215.log   1.15KB   3 downloads
•  enigma2_crash_1597425307.log   1.15KB   2 downloads

[dudule22]

On openpli or other image it is possible to play two oscam version at the same time. it can be done in the start script file. it probably possible to play oscam and cccam.

 

 

#!/bin/sh
case "$1" in
start)
   ulimit -s 1024
   /usr/bin/oscam1 --wait 0 --config-dir /etc/tuxbox/config/oscam1 --daemon --pidfile /tmp/oscam1.pid --restart 2 --utf8
   /usr/local/etc/oscammips --config-dir /usr/local/etc --daemon --pidfile /tmp/oscam2.pid --restart 2
   ;;
stop)
   kill `cat /tmp/oscam1.pid` 2> /dev/null
   killall -9 oscam1
   kill `cat /tmp/oscam2.pid` 2> /dev/null
   killall -9 oscammips
   ;;
restart|reload)
   $0 stop
   sleep 1
   $0 start
   ;;
version)
   echo "1.20"
   ;;
info)
   echo "OSCAM HIDEEN"
   ;;
*)
   echo "Usage: $0 start|stop|restart"
   exit 1
   ;;
esac
exit 0

[WanWizard]

It crashes if I access any settings belonging to the GUI, System GUI etc...

 

Than means the python-mmap package is not installed. Which is very weird, as it is an Enigma dependency.

 

You can re-install it manually on the commandline using

opkg install python-mmap

or via software management, package management.
 

[easyyu]

Hello..

I would like to know is this image posible to install on Amiko Viper Twin E2 receivers?

Do he have a support for twin tuner?

Thx

[WanWizard]

No. And no, we haven't received such a request from Amiko.

[fatnasa]

Hello Everyone

 

i have updated openpli 7.2 installed on Vu+ Duo2  to 7.3 by re-flashing the image

 

once the Duo2  is rebooted , it's stuck on openpli logo with spinning wheel and nothing changes for around 20 minutes

 

how long should i wait?

 

also what should be the next step?

 

thanks in advance.

[WanWizard]

A mount defined that no longer exists?

[fatnasa]

nope , only USB & HDD  are connected

 

also if the issue remains the same , how should i restore my backup?

Edited by fatnasa, 18 August 2020 - 11:27.

[WanWizard]

Can you access the box via telnet? It should have an IP at that time.

[fatnasa]

yes, telnet & ftp are accessible

[WanWizard]

Ok.

 

Can you telnet into the box, and issue the command

init 4

this should stop Enigma. You should see the spinner stopping, and you can double check with the "ps" command if enigma2 really isn't running anymore.

 

Then restart in debug mode:

ENIGMA_DEBUG_LVL=4 enigma2

It should tell you when the spinner is displayed again (mainloop is busy, displaying spinner), then copy the last 40 or so lines from the console and post them here...

 

You can about debug model with Ctrl-C.

[zebulon7]

I have tryed another time to connect my Duo2 by Wifi and no way, even i seek a new network.

All is ok in ethernet.

 

I have to notice that i have never connected my Duo2 in wifi, but i wanted to try it because i’m gonna have to change the position of my box and i didn't want to use CPL if it was possible. 

[fatnasa]

here is the full log

root@vuduo2:~# init 4
root@vuduo2:~# ENIGMA_DEBUG_LVL=4 enigma2
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=4
[Avahi] avahi_timeout_new
[Avahi] avahi_watch_new(3 0x1)
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] client state: 2
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
[eInit] + (9) GFBDC
[fb] /dev/fb0: 21600k video mem
[fb] double buffering available!
[gFBDC] resolution: 720x576x32 stride=7680, 12960kB available for acceleration surfaces.
[eInit] + (9) gLCD
[eFbLCD] /dev/fb1: No such file or directory
[eFbLCD] framebuffer /dev/fb1 not available
[eDboxLCD] xres=140, yres=32, bpp=8 lcd_type=3
[eLCD] (140x32x8) buffer 0x83a958 4480 bytes, stride 140
[gLCDDC] resolution: 140x32x8 stride=140
[eInit] + (9) Font Render Class
[Font] Initializing lib.
[Font] Loading fonts.
[Font] Intializing font cache, using max. 4MB.
[eInit] + (10) gRC
[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) DVB-CI UI
[eInit] + (20) UHF Modulator
[eRFmod] couldnt open /dev/rfmod0: No such file or directory
[eInit] + (20) RC Input layer
[eInit] + (20) misc options
[eInit] + (20) AVSwitch Driver
[eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: No such file or directory
[eInit] + (21) input device driver
[eInputDeviceInit] adding device /dev/input/event0
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
[eInputDeviceInit] Found 1 input devices.
[eInit] + (22) Hdmi CEC driver
[eHdmiCEC] detected physical address change: 1000 --> 1100
[eHdmiCEC] send message 84 11 00 03
[eInit] + (30) eActionMap
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] Slot: 0 setSource: A
[CI] Slot: 1 setSource: A
[CI] eDVBCIInterfaces setInputSource(0, A)
[CI] eDVBCIInterfaces setInputSource(1, B)
[CI] eDVBCIInterfaces setInputSource(2, C)
[CI] eDVBCIInterfaces setInputSource(3, D)
[CI] eDVBCIInterfaces setInputSource(4, E)
[CI] eDVBCIInterfaces setInputSource(5, F)
[CI] eDVBCIInterfaces setInputSource(6, G)
[CI] eDVBCIInterfaces setInputSource(7, H)
[CI] done, found 2 common interface slots
[CI] Streaming CI routing interface not advertised, assuming DVR method
[CI] Streaming CI finish interface not advertised, assuming "tuner" method
[eInit] + (35) CA handler
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[eInit] + (41) eServiceFactoryDVD
[eInit] + (41) eServiceFactoryWebTS
[eInit] + (41) eServiceFactoryTS
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) Encoders
[eInit] + (41) Stream server
[Avahi] AvahiServiceEntry (null) (_e2stream._tcp) 8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vuduo2 (_e2stream._tcp) on vuduo2:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vuduo2 (_e2stream._tcp) on vuduo2:8001
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)
[eDVBDB] loaded 0 channels/transponders and 0 services
eDVBSatelliteEquipmentControl::clear()
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend0] opening frontend
[eDVBFrontend0] opening frontend
[eDVBFrontend0] frontend 0 has DVB API 50a
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] opening frontend
[eDVBFrontend1] opening frontend
[eDVBFrontend1] frontend 1 has DVB API 50a
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] close frontend
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] opening frontend
[eDVBFrontend2] opening frontend
[eDVBFrontend2] frontend 2 has DVB API 50a
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] close frontend
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBAdapterLinux] get demux 2
[eDVBAdapterLinux] get demux 3
[eDVBAdapterLinux] get demux 4
[eDVBAdapterLinux] get demux 5
[eDVBAdapterLinux] get demux 6
[eDVBAdapterLinux] get demux 7
[eDVBAdapterLinux] get demux 8
[eDVBResourceManager] found 1 adapter, 3 frontends(3 sim) and 9 demux
[eDVBLocalTimeHandler] RTC not ready... wait for transponder time
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
[MAIN] Loading spinners...
[MAIN] found 7 spinner!
[MAIN] executing main
[setIoPrio] best-effort level 3 ok
[HardwareInfo] Scanning hardware info
Detected: vuduo2 (1500A0)
[CamControl] No softcam link? /etc/init.d/softcam
[eDVBFrontend] Failed to open /dev/dbox/fp0
[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
[Multiboot] Bootslots found: {}
[Harddisk] enumerating block devices...
[Harddisk] new device sda -> /dev/sda -> /dev/sda
[Console] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
unable to load config ([Errno 2] No such file or directory: '/etc/enigma2/settings'), assuming defaults...
[Keyboard] Adding keymap 'Dreambox Keyboard English' ('eng.kmap').
[Keyboard] Adding keymap 'Default (US)' ('default.kmap').
[Keyboard] Adding keymap 'Dreambox Keyboard Deutsch' ('dream-de.kmap').
[Keyboard] Adding keymap 'azerty keyboard' ('azerty.kmap').
[Keyboard] Adding keymap 'German keyboard' ('de.kmap').
Activating language English
[Keyboard] Activating keymap: 'Default (US)'.
[Console] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh
[gRC] main thread is non-idle! display spinner!
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 24, in <module>
    Tools.Geolocation.InitGeolocation()
  File "/usr/lib/enigma2/python/Tools/Geolocation.py", line 50, in InitGeolocation
  File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen
  File "/usr/lib/python2.7/urllib2.py", line 429, in open
  File "/usr/lib/python2.7/urllib2.py", line 447, in _open
  File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
  File "/usr/lib/python2.7/urllib2.py", line 1228, in http_open
  File "/usr/lib/python2.7/urllib2.py", line 1201, in do_open
  File "/usr/lib/python2.7/httplib.py", line 1121, in getresponse
  File "/usr/lib/python2.7/httplib.py", line 438, in begin
  File "/usr/lib/python2.7/httplib.py", line 394, in _read_status
  File "/usr/lib/python2.7/socket.py", line 480, in readline
socket.timeout: timed out
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 0 channels and 0 services!
[eDVBResourceManager] release cached channel (timer timeout)
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_watch_free
[Avahi] avahi_timeout_free
[eInit] - (41) eServiceFactoryDVD
[eInit] - (41) eServiceFactoryWebTS
[eInit] - (41) eServiceFactoryTS
[eInit] - (41) eServiceFactoryHDMI
[eInit] - (41) eServiceFactoryM2TS
[eInit] - (41) eServiceFactoryFS
[eInit] - (41) eServiceFactoryDVB
[eInit] - (41) Encoders
[eInit] - (41) Stream server
[eInit] - (40) eServiceCenter
[eServiceCenter] clear instance
[eInit] - (35) CI Slots
[eInit] - (35) CA handler
[eInit] - (30) eActionMap
[eInit] - (22) Hdmi CEC driver
[eInit] - (21) input device driver
[eInit] - (20) DVB-CI UI
[eInit] - (20) UHF Modulator
[eInit] - (20) RC Input layer
[eInit] - (20) misc options
[eInit] - (20) AVSwitch Driver
[eInit] - (15) eWindowStyleManager
[eInit] - (10) gRC
[gRC] waiting for gRC thread shutdown
[gRC] thread has finished
[eInit] - (9) GFBDC
[eInit] - (9) gLCD
[eInit] - (9) Font Render Class
[eInit] - (8) graphics acceleration manager
[eInit] - (5) Tuxtxt
[eInit] - (1) Background File Eraser
[eInit] reached rl -1

note : spinner cannot be seen any more , yet it's still stuck on  openpli logo

[fatnasa]

i have restored my backup for now