Because of the fact Bitbake still doesn't understand shared feeds. And fixing it is very low down on my todo list.
They aren't real updates btw, the packages are binary the same, only the PR version is different.
Posted 22 September 2020 - 20:23
Because of the fact Bitbake still doesn't understand shared feeds. And fixing it is very low down on my todo list.
They aren't real updates btw, the packages are binary the same, only the PR version is different.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 23 September 2020 - 14:23
I can't imagine the updates being responsible, as like I said there is no binary difference.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 23 September 2020 - 20:05
Posted 24 September 2020 - 00:19
Nope. What does the GSOD say? (menu - information - about - yellow key, and then left until you find the crash log).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 September 2020 - 20:43
If not, maybe he can put it on screen and make a photo of the TV with a smartphone?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 September 2020 - 21:18
Thanks, great idea!
the error message (photo is bad quality): IOError: [Errno 28] No space left on device
If not, maybe he can put it on screen and make a photo of the TV with a smartphone?
Edited by mcfly82, 24 September 2020 - 21:18.
Posted 24 September 2020 - 21:31
That's pretty clear: flash memory is full.
What type of box is it?
Usually this is caused either by:
In all cases, it can really only be solved by flashing the box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 September 2020 - 22:01
Clear. Thank you very much for your help!
The box is zgemma h.2s. I will flash his box next week, when I can meet him.
(I tried to make uninstall some plugins, but when he opened the plugins menu, and pushing red button tried to remove something, the box says "there is no new extensions" or "no new plugins" (or something similar, in hungarian language)
Thanks again!
That's pretty clear: flash memory is full.
What type of box is it?
Usually this is caused either by:
- installing too many plugins
- not having any external storage, so the EPG cache is stored in flash
- not having any external storage, so a recording is stored in flash
In all cases, it can really only be solved by flashing the box.
Posted 24 September 2020 - 22:12
If the box has no disk:
make sure a USB stick is plugged in, doesn't matter what size. Format it on the box, and set is as recording, timeshift location, and location for the epg cache file (epg.dat).
And probably also configure autobackup to make a daily backup on that disk, makes it a lot easier to flash next time.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 September 2020 - 22:16
Sure, I'll do this. Thank you for the advices!
If the box has no disk:
make sure a USB stick is plugged in, doesn't matter what size. Format it on the box, and set is as recording, timeshift location, and location for the epg cache file (epg.dat).
And probably also configure autobackup to make a daily backup on that disk, makes it a lot easier to flash next time.
Posted 25 September 2020 - 08:33
Hi,
I too have display problem after 7.2 -> 7.3 flash (and restart) : Display shows only static boot-rings, even in standby.
My receiver is an old VU+ Ultimo.
It seems that /dev/dbox/oled0 is missing (There is /dev/oled0 instead). VU plus specific plugin LEDbrightnesssetup needs it.
Doing 'mkdir /dev/dbox', and 'ln /dev/oled0 /dev/dbox', and restarting enigma brang the display back, but this is not proper fix.
I hope this helps.
Thank You for developing excellent software !
I updated and this same problem still exists. File or link '/dev/oled0' is missing.
Posted 27 September 2020 - 16:00
I will look into deeply it after the weekend, currently my box is busy with making scheduled recordings. Problem is that I do not remeber what was changed last, I made a couple of changes before it started to hang again.
Sorry it took so long. I wasn't able to pinpoint this. There's too many differences between the working and non-working settings file. Certainly the hang doesn't seem to be caused by single settings entry, rather a combination of these. It's too many combinations to test.
Whenever I restore 'bad' settings file from backup, enigma2 hangs so it's something that is certain, not happening 'sometimes'.
Avahi (it's the last message seen during debug run, when it hangs) is something network related and the only network-related setting that is present in my settings file is OpenWebIf VPN access being enabled but this does cause enigma2 to hang when enabled.
Long story short, I gave up. For the moment the receiver is working fine with settings file created from scratch.
Posted 29 September 2020 - 08:43
Hi,
I too have display problem after 7.2 -> 7.3 flash (and restart) : Display shows only static boot-rings, even in standby.
My receiver is an old VU+ Ultimo.
It seems that /dev/dbox/oled0 is missing (There is /dev/oled0 instead). VU plus specific plugin LEDbrightnesssetup needs it.
Doing 'mkdir /dev/dbox', and 'ln /dev/oled0 /dev/dbox', and restarting enigma brang the display back, but this is not proper fix.
I hope this helps.
Thank You for developing excellent software !
I updated and this same problem still exists. File or link '/dev/oled0' is missing.
Correction: '/dev/dbox/oled0' is missing. After restart.
Posted 2 October 2020 - 21:07
Hi, I just install the openpli-7.3-cuberevo_mini-20201001.root on my cuberevo mini and I'm facing the following problems that I can manage to solve.
First the VFD display after booting stays always with "LOAD" on it without showing the channel names and usual info.
Second I need to change the network from DHCP to static, that's easy but then I can't change the any number on the IPs, the cursor moves left, right, top, bottom so i can position any part of an IP address but them typing on the remote doesn't change any numbers.
Are these bugs or some setting I missed?
Is there a workaround?
Any help will be good, thanks.
Posted 2 October 2020 - 21:31
We don't make software for a cuberevo, so you may have to ask this to whoever make that image.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
De OpenPLi Release 8.2 is inmiddels beschikbaar in de downloadsectie.Started by Frenske, 23 May 2022 OpenPLi, Release, 8.2 |
|
|||
info: openpli for Amiko viper 4k v20Started by ness1, 24 Jan 2021 openpli, release, amiko, viper and 1 more... |
|
|||
Upgrade VU+ Uno 4k SE 6.1rc --> 6.1 releaseStarted by kemozcwu, 16 Jan 2018 upgrade, VU+ Uno 4k SE, STABLE and 1 more... |
|
|||
Release
Open-PLI 1 oder 2Started by no-test, 11 Dec 2010 Release |
|
|||
Release
PLi®'s OpenPLi v1.0 Enigma1&2 OpenEmbedded images onlineStarted by hemertje, 24 Sep 2010 Release |
|
0 members, 12 guests, 0 anonymous users