Jump to content


Photo

No channel available

OpenPLi Setup channels

  • Please log in to reply
6 replies to this topic

#1 fred_nima

  • New Member
  • 4 posts

0
Neutral

Posted 4 August 2020 - 03:54

I have just flashed my Zgemma star 2s with the OpenPLi 7.3 and I am not able to see view any channel. I have a motorized dish and I have a feeling I have not managed to complete the satellite setup. I can see channels under Astra 23 I can select but nothing comes. However, channels under Astra 28.2E are grayed out and when i select I get "Service unavailable check tuner configuration". 

 

Is there A plugin I can use to make my work a bit easier?

 

Thanks in advance. 



Re: No channel available #2 Frenske

  • Forum Moderator
    PLi® Core member
  • 24,125 posts

+243
Excellent

Posted 4 August 2020 - 06:36

If you have chosen the right timezone the data in the motorized dish setup (USALS) should be ok and with the proper satellites this should be working ok. What I’ve tested with many models it is. For testing purposes try to load the rotating settings from Hans first. I know that they work properly.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: No channel available #3 mimisiku

  • Senior Member
  • 2,940 posts

+46
Good

Posted 4 August 2020 - 08:23

And a softcam has been installed? Astra3 does not have many FTA channels...
Met één been in het graf..... Helaas

Re: No channel available #4 fred_nima

  • New Member
  • 4 posts

0
Neutral

Posted 4 August 2020 - 11:09

If you have chosen the right timezone the data in the motorized dish setup (USALS) should be ok and with the proper satellites this should be working ok. What I’ve tested with many models it is. For testing purposes try to load the rotating settings from Hans first. I know that they work properly.

Timezone set to Europe the London during setup, it that is what you are referring to here. I get no channels when I scan 28.2 Astra but 352 channels with 23.5E, this is the Hans rotating plugin. I guess i am doing something fundamentally wrong. 



Re: No channel available #5 ims

  • PLi® Core member
  • 12,257 posts

+188
Excellent

Posted 4 August 2020 - 11:20

Do you have set true long/lat for your position in tuner configuration (Simple, Positioner, Longitude, Latitude, Extra motor options)?


Kdo nic nedělá, nic nezkazí!

Re: No channel available #6 fred_nima

  • New Member
  • 4 posts

0
Neutral

Posted 4 August 2020 - 11:38

Do you have set true long/lat for your position in tuner configuration (Simple, Positioner, Longitude, Latitude, Extra motor options)?

I am not sure I did the right thing with that settings. I enabled extra motor options but didn't alter the Long/Lan so I got no channels during on scanning. 



Re: No channel available #7 fred_nima

  • New Member
  • 4 posts

0
Neutral

Posted 4 August 2020 - 15:16

Do you have set true long/lat for your position in tuner configuration (Simple, Positioner, Longitude, Latitude, Extra motor options)?

Thanks, I have the channels now. It was incorrect Longitude/Latitude that I used previously. 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users