Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3

Started by sherere, 24 Sep 2020 23:54

streamproxy vuplus transcode transcoding problem

Please log in to reply

13 replies to this topic

#1 sherere

Member
9 posts

0

Neutral

Posted 24 September 2020 - 23:54

Hi guys!

I read a lot in forums about streamproxy, but cant identify a solution to my case....

Stream is working perfectly but i cant transcode.

My streamproxy.conf

root@vuduo2:~# cat /etc/enigma2/streamproxy.conf
listen = 8002:transcode
listen = 8003:transcode
size = 720p
bitrate = 3000
profile = baseline
level = 3.1
bframes = 0

I have stopped streamproxy by doing /etc/init.d/streamproxy.sh stop

Then i started streamproxy with -f and try to transcoding via VLC on Windows 10, logs bellow:

root@vuduo2:~# streamproxy  -f
Checking manufacturer/model: VU+/SoloSE
Checking id: /proc/stb/info/model = dm8000
Checking id: /proc/stb/info/vumodel = solose
Checking manufacturer/model: VU+/Solo2
Checking id: /proc/stb/info/model = dm8000
Checking id: /proc/stb/info/vumodel = solo2
Checking manufacturer/model: VU+/Duo2
Checking id: /proc/stb/info/model = dm8000
Checking id: /proc/stb/info/vumodel = duo2
model identified as: VU+ Duo2 (bcm7424)
streamproxy: config_map: audiolang = orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ//0
streamproxy: config_map: auth = true/1
streamproxy: config_map: bframes = 0/0
streamproxy: config_map: bitrate = 3000/3000
streamproxy: config_map: foreground = true/1
streamproxy: config_map: group = /0
streamproxy: config_map: level = 3.1/3
streamproxy: config_map: listen:8002 = 1/1
streamproxy: config_map: listen:8003 = 1/1
streamproxy: config_map: profile = baseline/0
streamproxy: config_map: size = 720p/720
streamproxy: config_map: webifport = 5080/5080
streamproxy: accept new connection on port 8002, default action: transcode, fd 6
ClientSocket: authentication: *****,*****
ClientSocket: header[accept]: "*/*"
ClientSocket: header[accept-language]: "pt_BR"
ClientSocket: header[authorization]: "Basic cm9vdDpoMzBqZGp0aA=="
ClientSocket: header[host]: "fakeurl.myddns.me:8002"
ClientSocket: header[range]: "bytes=0-"
ClientSocket: header[user-agent]: "VLC/3.0.11 LibVLC/3.0.11"
ClientSocket: url: /1:0:19:27E:2A:8:FFFF0000:0:0:0:

clientsocket: streaming parameters before defaults from config:
    http_range = 0-

clientsocket: reject config default audiolang = orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ/
clientsocket: reject config default auth = true
clientsocket: accept config default bframes = 0
clientsocket: accept config default bitrate = 3000
clientsocket: reject config default foreground = true
clientsocket: reject config default group =
clientsocket: accept config default level = 3.1
clientsocket: reject config default listen:8002 = 1
clientsocket: reject config default listen:8003 = 1
clientsocket: accept config default profile = baseline
clientsocket: accept config default size = 720p
clientsocket: reject config default webifport = 5080

clientsocket: streaming parameters after defaults:
    bframes = 0
    bitrate = 3000
    http_range = 0-
    level = 3.1
    profile = baseline
    size = 720p

clientsocket: streaming parameters after url params:
    bframes = 0
    bitrate = 3000
    http_range = 0-
    level = 3.1
    profile = baseline
    size = 720p
clientsocket: reject default bitrate, it is already set to 3000
clientsocket: reject default size, it is already set to 720p
clientsocket: reject default profile, it is already set to baseline
clientsocket: reject default level, it is already set to 3.1
clientsocket: reject default bframes, it is already set to 0
clientsocket: accept default framerate = 30000

clientsocket: streaming parameters after setting default params:
    bframes = 0
    bitrate = 3000
    framerate = 30000
    http_range = 0-
    level = 3.1
    profile = baseline
    size = 720p
Service: create service: 1:0:19:27E:2A:8:FFFF0000:0:0:0:
ClientSocket: default live request
ClientSocket: default live transcoding request
ClientSocket: transcoding service broadcom
LiveTranscodingBroadcom: 1:0:19:27E:2A:8:FFFF0000:0:0:0
WebifRequest: send request to webif: "GET /web/stream?StreamService=1:0:19:27E:2A:8:FFFF0000:0:0:0 HTTP/1.0

"
ClientSocket: http_trap: LiveTranscodingBroadcom: tuning request to enigma failed (webif timeout) (std::exception) (404: HTTP/1.1 404 Not found, cannot tune to service@Content-Type: text/html@Connection: close@Accept-Ranges: bytes@@)
streamproxy: pid 8968 exited
streamproxy: accept new connection on port 8002, default action: transcode, fd 6
ClientSocket: authentication: *****,*****
ClientSocket: header[authorization]: "Basic cm9vdDpoMzBqZGp0aA=="
ClientSocket: header[host]: "fakeurl.myddns.me:8002"
ClientSocket: header[icy-metadata]: "1"
ClientSocket: header[user-agent]: "VLC/3.0.11 LibVLC/3.0.11"
ClientSocket: url: /1:0:19:27E:2A:8:FFFF0000:0:0:0:

clientsocket: streaming parameters before defaults from config:
clientsocket: reject config default audiolang = orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ/
clientsocket: reject config default auth = true
clientsocket: accept config default bframes = 0
clientsocket: accept config default bitrate = 3000
clientsocket: reject config default foreground = true
clientsocket: reject config default group =
clientsocket: accept config default level = 3.1
clientsocket: reject config default listen:8002 = 1
clientsocket: reject config default listen:8003 = 1
clientsocket: accept config default profile = baseline
clientsocket: accept config default size = 720p
clientsocket: reject config default webifport = 5080

clientsocket: streaming parameters after defaults:
    bframes = 0
    bitrate = 3000
    level = 3.1
    profile = baseline
    size = 720p

clientsocket: streaming parameters after url params:
    bframes = 0
    bitrate = 3000
    level = 3.1
    profile = baseline
    size = 720p
clientsocket: reject default bitrate, it is already set to 3000
clientsocket: reject default size, it is already set to 720p
clientsocket: reject default profile, it is already set to baseline
clientsocket: reject default level, it is already set to 3.1
clientsocket: reject default bframes, it is already set to 0
clientsocket: accept default framerate = 30000

clientsocket: streaming parameters after setting default params:
    bframes = 0
    bitrate = 3000
    framerate = 30000
    level = 3.1
    profile = baseline
    size = 720p
Service: create service: 1:0:19:27E:2A:8:FFFF0000:0:0:0:
ClientSocket: default live request
ClientSocket: default live transcoding request
ClientSocket: transcoding service broadcom
LiveTranscodingBroadcom: 1:0:19:27E:2A:8:FFFF0000:0:0:0
WebifRequest: send request to webif: "GET /web/stream?StreamService=1:0:19:27E:2A:8:FFFF0000:0:0:0 HTTP/1.0

"
ClientSocket: http_trap: LiveTranscodingBroadcom: tuning request to enigma failed (webif timeout) (std::exception) (404: HTTP/1.1 404 Not found, cannot tune to service@Content-Type: text/html@Connection: close@Accept-Ranges: bytes@@)
streamproxy: pid 8969 exited

Its look like streamproxy cant tune enigma into the right channel...

Can any one help me?? Thanks!

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #2 sherere

Member
9 posts

0

Neutral

Posted 25 September 2020 - 00:01

Openpli infos:

Software Sistema OE: PLi-OE Versão do Firmware: OpenPLi 7.3-release (2020-08-29-release-7.3) Kernel / Drivers: 3.13.5 / 20190429

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #3 anudanan

Senior Member
1,185 posts

+16

Neutral

Posted 25 September 2020 - 07:15

There is a communication problem from streamproxy to openwebif to tune the requested channel.

Is openwebif running on your box?

Or is there a compatibility problem between current streamproxy and current openwebif to use GET /web/stream without authentication from 127.0.0.1?

Edited by anudanan, 25 September 2020 - 07:17.

Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #4 WanWizard

PLi® Core member
68,510 posts

+1,734

Excellent

Posted 25 September 2020 - 15:25

ClientSocket: header[host]: "fakeurl.myddns.me:8002"

Connection doesn't seem to be from the local LAN...

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #5 sherere

Member
9 posts

0

Neutral

Posted 1 October 2020 - 02:44

Yeap, its from outside, but NAT is configured. In previuos versions it work like a charm.

The fakeurl was edited by me....

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #6 sherere

Member
9 posts

0

Neutral

Posted 1 October 2020 - 02:47

There is a communication problem from streamproxy to openwebif to tune the requested channel.
Is openwebif running on your box?

Or is there a compatibility problem between current streamproxy and current openwebif to use GET /web/stream without authentication from 127.0.0.1?

Yes, webif running ok

About a possible compatibility problem, i dont know how to solve It...

Can u give me some directions?

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #7 anudanan

Senior Member
1,185 posts

+16

Neutral

Posted 1 October 2020 - 06:03

I don´t know how to solve it. I think Erik Slagter is the right person to helb

Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #8 teo1966

Senior Member
1,105 posts

+10

Neutral

Posted 1 October 2020 - 09:15

Have you in your openwef settings access from vpn on or off
You can't try this to set on

VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #9 sherere

Member
9 posts

0

Neutral

Posted 2 October 2020 - 01:47

Have you in your openwef settings access from vpn on or off
You can't try this to set on

Cant find vpn settings on open webif via browser. There is a config file?

In time, i try to transcode recorded movies and it worked.... But cant transcode Channels

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #10 teo1966

Senior Member
1,105 posts

+10

Neutral

Posted 2 October 2020 - 05:45

menu / applicaties / openwebif / vpn on

VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #11 sherere

Member
9 posts

0

Neutral

Posted 4 October 2020 - 23:55

menu / applicaties / openwebif / vpn on

hmmmm on openpli menu? Like menu > plugins > openwebif?

cant find VPN settings there...

2XAjlR.md.png

thanks!!

Edited by sherere, 4 October 2020 - 23:55.

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #12 teo1966

Senior Member
1,105 posts

+10

Neutral

Posted 5 October 2020 - 05:48

i think this one desativar acesso remoto ac utilizador root

VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #13 sherere

Member
9 posts

0

Neutral

Posted 5 October 2020 - 19:21

i think this one desativar acesso remoto ac utilizador root

Lol, thanks teo1966, and yeap is this one, when i deactivated the VPN line appears, im doing tests right now...

But im testing after a fresh firmware install

Edited by sherere, 5 October 2020 - 19:22.

Re: Streamproxy transcoding problem on Vuplus Duo2 OpenPli 7.3 #14 sherere

Member
9 posts

0

Neutral

Posted 6 October 2020 - 12:57

Ok, thanks guys for your help.

Unfortunately in this new version transcode only worked with VPN option.

I know it's safier but im my case i prefer to use http authentication...

Back to [EN] Enduser support

Also tagged with one or more of these keywords: streamproxy, vuplus, transcode, transcoding, problem

Transcoding Parameter in m3u8-File hat die falsche Syntax? Started by Wallenstein2, 3 Mar 2024 WebIf, m3u8, Transcoding	1 reply 142 views	WanWizard 3 Mar 2024
Remote channel stream converter Started by lexhoub, 28 Aug 2022 stream, hdmi, vuplus	13 replies 1,153 views	dolphs 16 Sep 2022
no parse cannot emu met OpenPli8.1 Started by jeandubois, 6 Nov 2021 vuplus, VU+ Duo 4K SE and 1 more...	6 replies 938 views	mimisiku 7 Nov 2021
OpenPLI 8.0 Transcoding Crash SF8008 Started by natedogg20050, 18 Mar 2021 Transcoding, SF8008	6 replies 1,417 views	natedogg20050 18 Mar 2021
transcoding op de xsarius revo4k Started by mk2k, 4 Jun 2020 xsarius, revo4k, transcoding	12 replies 1,004 views	mk2k 5 Jun 2020