I don‘t own a GB quad 4K so I can‘t check. Although I’m not a skinner I will play a bit with some values.
@Abu Baniaz
As far as I remember the display on the GB Quad 4K is a tiny bit larger.
Posted 7 October 2020 - 07:48
I don‘t own a GB quad 4K so I can‘t check. Although I’m not a skinner I will play a bit with some values.
@Abu Baniaz
As far as I remember the display on the GB Quad 4K is a tiny bit larger.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 October 2020 - 08:29
One of the foto, the one with the small clock, is how the box normally show the display, the other foto is when the box blitzing (about 2 times a minute, for about 1/2 sec,,,,,glad I could take that picture,,,does not show up long).
No special plugins, the only one I have downloaded is a cam.
Using stock image (have tried to download different skins, same problem, did a new clean install, problems still there, but now I know that there is nothing else installed beside the image and a cam.
Posted 7 October 2020 - 08:54
@BaggerHD
Can you zip the video and attach it again or share a video via wetransfer or an alternative website?
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 October 2020 - 09:07
Apart from your 'blinking issue' can you add these lines in your skin_display_default.xml, save and restart your box and put the box in stand-by again? This file can be found in \\gbquad4k\root\usr\share\enigma2\display\skin_default I guess.
Take notice that I am not a skinner so I just tried something. Perhaps you'd better save the present file first.
<screen name="StandbySummary" position="0,0" size="220,176" backgroundColor="GBLcdBlack"> <widget source="global.CurrentTime" render="Label" position="0,25" size="165,61" font="GBLcd;60" halign="right" foregroundColor="GBLcdGrey" backgroundColor="GBLcdBlack"> <convert type="ClockToText"/> </widget> <widget source="session.RecordState" render="FixedLabel" text="REC" position="166,29" size="44,27" font="GBLcd;25" foregroundColor="GBLcdRed" backgroundColor="GBLcdBlack" halign="right"> <convert type="ConditionalShowHide"/> </widget> <widget source="global.CurrentTime" render="Label" position="166,54" size="49,32" font="GBLcd;20" foregroundColor="GBLcdGrey" backgroundColor="GBLcdBlack"> <convert type="ClockToText">Format::%S</convert> </widget> <widget source="global.CurrentTime" render="Label" position="0,88" size="220,60" font="GBLcd;25" halign="center" foregroundColor="GBLcdGrey" backgroundColor="GBLcdBlack"> <convert type="ClockToText">LongDate</convert> </widget> </screen>
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 October 2020 - 09:34
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 October 2020 - 09:41
To avoid that we're actually talking about different hardware, place a screenshot of your about-screen. Menu - information - Your receiver?
Apart from all previous info I assume you have downloaded your image via our website and not from any other OpenPLi like location?
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 October 2020 - 14:30
gigablue uhd quad 4k
<screen name="StandbySummary" position="0,0" size="400,240"> <widget source="global.CurrentTime" render="Label" position="0,0" size="400,24" font="FdLcD;22" halign="left" noWrap="1"> <convert type="ClockToText">Format:%d.%m.%Y</convert> </widget> <widget source="global.CurrentTime" render="Label" position="center,center" size="225,100" font="FdLcD;85" halign="center" noWrap="1"> <convert type="ClockToText">Format:%H:%M</convert> </widget> <widget source="session.RecordState" render="FixedLabel" text="Recording" position="center,150" size="190,22" font="FdLcD;22" zPosition="2" valign="bottom" halign="center" noWrap="1" foregroundColor="#ff0000" > <convert type="ConfigEntryTest">config.usage.blinking_rec_symbol_during_recording,True,CheckSourceBoolean</convert> <convert type="ConditionalShowHide">Blink</convert> </widget> <widget source="session.RecordState" render="FixedLabel" text="Recording" position="center,150" size="190,22" font="FdLcD;22" zPosition="2" valign="bottom" halign="center" noWrap="1" foregroundColor="#ff0000" > <convert type="ConfigEntryTest">config.usage.blinking_rec_symbol_during_recording,False,CheckSourceBoolean</convert> <convert type="ConditionalShowHide" /> </widget> </screen>
Edited by WanWizard, 7 October 2020 - 14:43.
Posted 7 October 2020 - 16:19
@vauvauvau.
I suspect you use LCD4linux on your GB quad 4K where initially this topic is about the GB UE 4K.
Why don’t you try to replace your skin_display with the one Abu Baniaz posted? https://github.com/O...ay_gbquad4k.xml
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 October 2020 - 16:44
@vauvauvau.
I suspect you use LCD4linux on your GB quad 4K where initially this topic is about the GB UE 4K.
Why don’t you try to replace your skin_display with the one Abu Baniaz posted? https://github.com/O...ay_gbquad4k.xml
Abu Baniaz posted - the size of the clock did not affect it
I do not use Lcd4linux, I support openpli without unnecessary add-ons+default skin
the size of the clock is fine if it adds what i posted
- google translate
0 members, 2 guests, 0 anonymous users