7 replies to this topic

[marcoda]

Hello everybody,

My name is Marco and I'm a new Member. I have 2 Vu+ Receiver: A Duo2 and a Solo.

 

I'm writing you concerning the Vu+ Solo: I Installed the latest OpenPli version today 7.3 and then I noticed that I had not enough free space on my Hard disk so I decided to uninstall some extension that I was not using.

 

After rebooting the device it entered in a infinite loop (cf attachment). 

 

Do you have any idea what I could do to solve the problem? SSH access is working fine.

 

Thanks a lot,

Marco

 

The are some logs :

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

/tmp/enigma2_crash.log

OpenPLi Enigma2 crash log

crashdate=jeu. janv.  1 01:23:41 1970
compiledate=Aug 31 2020
skin=PLi-FullNightHD/skin.xml
sourcedate=2020-08-29
branch=release-7.3
rev=6976b55
component=Enigma2

stbmodel=solo
stbmodel=dm500hd
kernelcmdline=bmem=156M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
nimsockets=NIM Socket 0:
imageissue=openpli 7.3-release %h

▒W/w▒W/wb/vmpeg/1/dst_appl
dmesg
<4>[CI]:ci_dev_release
<4>
<4>[CI]:ci_dev_release
<4>
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_SELECT_SOURCE 1
<4>[VID]: VIDEO_PLAY 1  5 0
<4>[VID]: VIDEO_CONTINUE 1  1
<4>[VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[VID]: VIDEO_STOP 0  1
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[LCD]:dbox_lcd_open
<4>
<4>[LCD]:dbox_lcd_ioctl cmd : 4117
<4>
<3>[LCD]: unknown cmd 0x1015
<4>[CI]:ci_dev_open
<4>
<4>[CI]:ci1_dev_open
<4>
<4>[CI]:NEXUS_Remux_Start CI0 1 1
<4>
<4>[CI]:>>close_mpod tuner:0
<4>
<4>[CI]:remux stop
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[CI]:>>close_mpod tuner:1
<4>
<4>[CI]:remux stop
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[DFP]:scart_select_tvvideotype TV = 0
<4>[DFP]:max9597_fast_blanking data = 0x0
<4>[DFP]:max9597_enable_output data = 0x6
<4>[DFP]:scart_select_tvout aTVOutType = 2
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[AUD]: AUDIO_SET_MUTE 0
<4>[AUD]: AUDIO_SET_MIXER -2054152720
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/home/root/enigma2_crash.log
OpenPLi Enigma2 crash log
crashdate=dim. oct.  4 17:54:34 2020
compiledate=Aug 31 2020
skin=PLi-FullNightHD/skin.xml
sourcedate=2020-08-29
branch=release-7.3
rev=6976b55
component=enigma2
stbmodel=solo
stbmodel=dm500hd
kernelcmdline=bmem=156M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
nimsockets=NIM Socket 0:
imageissue=openpli 7.3-release %h

REMOVE Peer vusolo
[eDVBPESReader] ERROR reading PES (fd=55): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=55): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=55): Value too large for defined data type
../../git/lib/base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILED!

dmesg
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144627888  0
<4>[VID]: VIDEO_PLAY 2144627888  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c1bc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623784  0
<4>[VID]: VIDEO_PLAY 2144623784  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c33c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144627888  0
<4>[VID]: VIDEO_PLAY 2144627888  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c27c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144627888  0
<4>[VID]: VIDEO_PLAY 2144627888  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c2dc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 1
<4>[AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623760  0
<4>[VID]: VIDEO_PLAY 2144623760  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c39c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 1
<4>[AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623760  0
<4>[VID]: VIDEO_PLAY 2144623760  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c33c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>FE tune
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 1
<4>[AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 0
<4>[VID]: VIDEO_FREEZE 2144623784  0
<4>[VID]: VIDEO_PLAY 2144623784  2 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c24c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 1
<4>[AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 0
<4>[VID]: VIDEO_FREEZE 2144623784  0
<4>[VID]: VIDEO_PLAY 2144623784  2 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c3cc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623768  0
<4>[VID]: VIDEO_PLAY 2144623768  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c2dc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 1
<4>[AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623784  0
<4>[VID]: VIDEO_PLAY 2144623784  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c27c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623776  0
<4>[VID]: VIDEO_PLAY 2144623776  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c27c
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 1
<4>[AUD]: AUDIO_PLAY 1 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144627888  0
<4>[VID]: VIDEO_PLAY 2144627888  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c1bc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144623760  0
<4>[VID]: VIDEO_PLAY 2144623760  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c2ac
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[AUD]: AC3 downmix 0  state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 2144627888  0
<4>[VID]: VIDEO_PLAY 2144627888  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0b6c1bc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP -2
<4>[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>nfsd: last server has exited, flushing export cache
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/var/log/dmesg


Linux version 3.9.6 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 Sun Jul 5 14:25:15 CEST 2020
Fetching vars from bootloader... found 7 vars.
Early serial console at MMIO32 0x10400b00 (options '115200n')
bootconsole [uart0] enabled
Options: sata=0 enet=1 emac_1=0 no_mdio=0 docsis=0 pci=1 smp=0 moca=0 usb=1
Using 256 MB RAM (from straps)
bootconsole [early0] enabled
CPU revision is: 0101954c (Brcm4380)
FPU revision is: 01739300
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 93 MB LINUX region at 6 MB (0x05d28000@0x006d8000)
bmem: adding 156 MB RESERVED region at 100 MB (0x09c00000@0x06400000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8067cdd0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
MIPS secondary cache 128kB, 8-way, linesize 128 bytes.
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: bmem=156M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
__ex_table already sorted, skipping sort
Writing ErrCtl register=0080000f
Readback ErrCtl register=0080000f
L2 cache parity protection enabled
Memory: 93100k/262144k available (5228k kernel code, 169044k reserved, 1415k data, 264k init, 0k highmem)
NR_IRQS:128
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 332 MHz (166.498 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 220.16 BogoMIPS (lpj=110080)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 128
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.21)
msgmni has been set to 181
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
loop: module loaded
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1d:ec:04:2b:57)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 63, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 64, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 59, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
EBI CS0: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=55042200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=55042200
Block size=00020000, erase shift=17
NAND Config: Reg=55042200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0
Found NAND on CS0: ACC=d3000000, cfg=55042200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0200 128MB @00000000
B4: NandSelect=40000101, nandConfig=55042200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=55042200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 2.0 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
nand_read_bbt: Bad block at 0x010c0000
nand_read_bbt: Bad block at 0x01d20000
nand_read_bbt: Bad block at 0x01dc0000
nand_read_bbt: Bad block at 0x02e80000
Creating 7 MTD partitions on "brcmnand.0":
0x000000000000-0x000007400000 : "rootfs"
0x000007400000-0x000007800000 : "kernel"
0x000007800000-0x000007c00000 : "boot"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd0 to ubi0
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 116 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 924, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 9/1, WL threshold: 4096, image sequence number: 326757730
UBI: available PEBs: 0, total reserved PEBs: 924, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
UBIFS: parse sync
UBI: background thread "ubi_bgt0d" started, PID 37
UBIFS: background thread "ubifs_bgt0_0" started, PID 38
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 113389568 bytes (108 MiB, 893 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 62186DE2-FD96-4EBB-A1DE-006867F48958, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 264k freed
procmk_init
dvb_bcm7325: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo)
bcm7325: hotplug_callback():
Hotplug - status.connected 1
bcm7325: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: ^A6bcm7335_video_init
[AUD]: ^A6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7335 FE)...
[MPVR]: >> misc_pvr_init
input: dreambox remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[LCD]:power led off
[LCD]:bm730_dbox_lcd_write_data
[LCD]:vfd reply success
[CI]: registered ci0
[CI]: registered ci1
[DFP]: registered dbox fp
[DFP]:max9597_Shutdown data = 0x80
[SC]: registered sci0
system_time_set wakeup mode get
[LCD]:bm730_dbox_lcd_write_read_data len: 8
[LCD]:rtc data received 4
system_time_set wakeup mode get 0xc4
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  5 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0

 

Edited by WanWizard, 1 November 2020 - 22:08.
formatting

[marcoda]

Hello,

I started now enigma2 manualy with verbose debug. Here is the log.

 

I already tried to re-install enigma2 with these commands. 

init 4

opkg update

opkg install enigma2 -force-reinstall

init 3

 

It seems that one or more missing file cause the problem, due to my extensions/plugin that I deleted.

 

Any idea where to begin :-) ?

 

Thanks

 

Here is the verbose log when lunching enigma 2 manually: 

init 4
ENIGMA_DEBUG_LVL=4 enigma2

 

...

[eDVBDB] 3 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 720x576x32 stride=7680, 12960kB available for acceleration surfaces.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/ae_AlMateen.ttf' -> 'Replacement'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Subs'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Italic.ttf' -> 'Subsi'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Bold.ttf' -> 'Subsb'.
[Font] Adding font '/usr/share/fonts/LiberationSans-BoldItalic.ttf' -> 'Subsz'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml'.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'FdLcD'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 5400kB available for acceleration surfaces.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml' complete.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/lcd.ttf' -> 'LCD'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml' complete.
[Skin] Loading skin file 'skin_user.xml'.
[Skin] Warning: Skin file 'skin_user.xml' does not exist!
[InputDevice] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[InputDevice] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[eAVSwitch] cannot open /proc/stb/avs/0/input_choices: No such file or directory
--> setting scaler_sharpness to: 0000000D
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[Timezones] Note: Classic time zones in '/etc/timezone.xml' are not available.
[Timezones] Setting time zone to 'Europe/Luxembourg'.
[Timezones] Local time is 'dim. 01-nov.-2020 22:00:26'  -  UTC time is 'dim. 01-nov.-2020 21:00:26'.
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 214]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 214], 'up': True, 'mac': '00:1d:ec:04:2b:57', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 178, 214], 'gateway': [192, 168, 178, 1]}}
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
getFPVersion failed!
[OpenWebif] -D- tuner '0' 'BCM7325 DVB-S2 NIM (internal)' 'Tuner A'
[TIMER] record time changed, start prepare is now: Thu Jan  1 00:59:40 1970
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/skin.xml'.
[Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/skin.xml' complete.
[Font] Adding font '/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/MyriadPro-Regular.otf' -> 'RegularIPTV'.
No module named servicewebts
ERROR servicewebts
[eHdmiCEC] send message 8E 00
[eInit] + (41) eServiceFactoryMP3
EPG Refresh Plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[Avahi] AvahiServiceEntry (null) (_http._tcp) 80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vusolo (_http._tcp) on vusolo:80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vusolo (_http._tcp) on vusolo:80
[eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[eEPGCache] /hdd/epg.dat not found, try /epg.dat
[Skin] Parsing embedded skin '<embedded-in-Screensaver>'.
[Skin] Processing screen '<embedded-in-Screensaver>', position=(0, 0), size=(1920 x 1080) for module 'Screensaver'.
[Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Skin] Processing screen 'SecondInfoBarSimple', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Skin] Parsing embedded skin '<embedded-in-HideVBILine>'.
[Skin] Processing screen '<embedded-in-HideVBILine>', position=(0, 0), size=(1920 x 7) for module 'HideVBILine'.
[Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1920 x 1080) for module 'ChannelSelection'.
[ActionMap] Keymap(s) 'InfobarEPGActions' -> Undefined action(s) 'showEventInfoMultiEPG, showInfobarOrEpgWhenInfobarAlreadyVisible'.
[Skin] Processing screen 'RdsInfoDisplay', position=(22, 90), size=(1920 x 300) for module 'RdsInfoDisplay'.
[Skin] No skin to read or screen to display.
[Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(?, ?), size=(? x ?) for module 'RdsInfoDisplaySummary'.
[Skin] Processing screen 'UnhandledKey', position=(1856, 10), size=(34 x 45) for module 'UnhandledKey'.
[Skin] Processing screen 'VideoMode', position=(127, 67), size=(600 x 75) for module 'VideoMode'.
[Skin] Processing screen 'Dish', position=(30, 90), size=(195 x 303) for module 'Dish'.
[Skin] Processing screen 'BufferIndicator', position=(660, 45), size=(600 x 48) for module 'BufferIndicator'.
[Skin] Processing screen 'TimeshiftState', position=(150, 67), size=(1620 x 150) for module 'TimeshiftState'.
[Skin] Processing screen 'TimeshiftLive', position=(105, 105), size=(450 x 45) for module 'TimeshiftLive'.
[Skin] Processing screen 'SubtitleDisplay', position=(0, 0), size=(1920 x 1080) for module 'SubtitleDisplay'.
RemovePopup, id = ZapError
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 589, in <module>
    runScreenTest()
  File "/usr/lib/enigma2/python/mytest.py", line 470, in runScreenTest
    runNextScreen(session, screensToRun)
  File "/usr/lib/enigma2/python/mytest.py", line 464, in runNextScreen
    session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
  File "/usr/lib/enigma2/python/mytest.py", line 290, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 300, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 243, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 260, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 66, in __init__
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 565, in __init__
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 213, in getHotkeyFunctions
  File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 133, in getPluginsForMenu
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/HdmiCEC/plugin.py", line 144, in startSetup
    if menuid == "video" and config.av.videoport.value == "DVI" and config.usage.setup_level.index >= 1:
  File "/usr/lib/enigma2/python/Components/config.py", line 1682, in __getattr__
AttributeError: videoport
------------------------------------------------------------
[MAIN] (exit code 5)
[gRC] main thread is non-idle! display spinner!
Killed
root@vusolo:/etc/enigma2#
 

[ccs]

Date of log looks like October 4th 2020 ??

 

crashdate=dim. oct.  4 17:54:34 2020

[WanWizard]

If I were you, I would flash it again, and next time, don't go into the filesystem deleting stuff...

[marcoda]

Yes, that what I will do. I just want to add that I deleted the extensions cleanly, using the user interface (settings/extensions/ select it and « delete »). But nevertheless, the problem occurred...

Thanks,
Marco


Envoyé de mon iPhone en utilisant Tapatalk

[WanWizard]

For all extensions installed via plugins, green button, you can remove them cleanly via the red button. It should remove everything that was installed.

[betacentauri]

But several plugins are needed by enigma2. Mostly the system plugins.

[WanWizard]

True. So don't delete plugins you haven't installed yourself.