Is it possible to use a dreambox remote control (original dm8000pvr) with a Vu+Duo2 box (OpenPli)?
In that case how to?
regards
Posted 19 January 2021 - 15:16
I just recently changed from Xtrend ET10000 to Vu+ Ultimo 4K.
Is it possible to reprogram / use the remote of the ET10000 on the Vu+ Ultimo 4k?
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 19 January 2021 - 15:20
AFAIK this isn't possible just like that. So I'm afraid the answer is 'no'.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 19 January 2021 - 15:31
AFAIK this isn't possible just like that. So I'm afraid the answer is 'no'.
Ok, thanks for the answer. Too bad.
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 19 January 2021 - 15:47
You'll get used to it, the VU+ remote is by far the best of all, compared to all others...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 20 January 2021 - 12:00
i think it can help you
if you are looking spare Universal remote control
DM-900 ,DM-520, Vu+Duo2
Posted 20 January 2021 - 12:25
You'll get used to it, the VU+ remote is by far the best of all, compared to all others...
Maybe. We are used to the ET10000. Especially the PIP button is missed...
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 20 January 2021 - 12:27
i think it can help you
if you are looking spare Universal remote control
Thank you, for the link. I could not (yet) find one for the Ultimo4K with the (exact) layout and keys as with the Xtrend ET10000.
I apreciate the effort, though.
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 21 January 2021 - 16:13
You'll get used to it, the VU+ remote is by far the best of all, compared to all others...
Maybe. We are used to the ET10000. Especially the PIP button is missed...
Press two times blue button and you get pip.
If you want to assign a button for direct PiP you can go into the Hotkey menu (Menu - Parameters - System - Expert Parameters - Hotkey)
For exemple you can assing PiP to long green Go into the infobar options in the list you will find Display PiP
Press green to save
Return to TV watching long press green and PiP will start, long press green and it will be disabled.
Edited by Pr2, 21 January 2021 - 16:14.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 21 January 2021 - 20:32
You'll get used to it, the VU+ remote is by far the best of all, compared to all others...
Maybe. We are used to the ET10000. Especially the PIP button is missed...
Press two times blue button and you get pip.
If you want to assign a button for direct PiP you can go into the Hotkey menu (Menu - Parameters - System - Expert Parameters - Hotkey)
For exemple you can assing PiP to long green Go into the infobar options in the list you will find Display PiP
Press green to save
Return to TV watching long press green and PiP will start, long press green and it will be disabled.
Thank you for taking the effort.
However I was asking if the RC of the ET10000 can be used on the Ultimo4K.
In our household we used it for many many years and are used to its layout. I mentioned the PIP button as example. I already understood the RC from the ET10000 cannot be modified for that purpose.
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 21 January 2021 - 22:09
Frenske already answered that question. No, a VU+ does not support different types of remote control.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 22 January 2021 - 09:41
Frenske already answered that question. No, a VU+ does not support different types of remote control.
I confirmed that in my last post: "I already understood the RC from the ET10000 cannot be modified for that purpose."
But thank you for the confirmation.
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Posted 22 January 2021 - 10:28
If you are insterested, I am using an Android app to remote control the VU+ (quite old) but that works perfectly on my Samsung tablette (Galaxy Tab A - 2019) with BH and almost perfectly with OpenPLi (needs some modifs on keymap.xml file to work 100%) on my Vu+Duo4KSE.
PM me to get a download link
GS
Edited by gspock, 22 January 2021 - 10:29.
VU+ DUO-4K-SE with 1 DBV-C and 1TB Hitachi HDD, OpenPLi 8.3
Posted 22 January 2021 - 13:14
@gspock.
If this doesn’t violate our boardrules why don’t you add the link here so other users can use it too if they are interested.
Unless it is some kind of weird illegal plugin which I can hardly imagine.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 22 January 2021 - 13:22
@gspock.
If this doesn’t violate our boardrules why don’t you add the link here so other users can use it too if they are interested.
Unless it is some kind of weird illegal plugin which I can hardly imagine.
OK, I was not sure about the rules. Here it is: (this is not a plug-in, this is an Android app that used to be in the google store and was removed so time ago due to obsolescence (althoug it works well on some devices !) :
https://www.dropbox....player.apk?dl=0
Edited by gspock, 22 January 2021 - 13:24.
VU+ DUO-4K-SE with 1 DBV-C and 1TB Hitachi HDD, OpenPLi 8.3
Posted 22 January 2021 - 13:24
Ok. Thanks on behalf of the ones that need it.
Now the users can test and respond.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 22 January 2021 - 13:28
Updated version already available @ Vu+
working fine in my lenovo tab.
Link
http://www.vuplus.co...dx=22&pagenum=1
DM-900 ,DM-520, Vu+Duo2
0 members, 0 guests, 0 anonymous users