Jump to content


Photo

FBC switch for several FBC LNBs


  • Please log in to reply
32 replies to this topic

#1 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 November 2020 - 07:37

FBC switch for several FBC LNBs..

May I ask from FBC LNB users what matrix you use? By my understanding this can't be a normal DiSEqC? Let say, I have toroidal-90 antenna with 8 FBC LNB. What should I use and how to connect the FBC LNBs so, I can use them with all beauty and glory? Let say, the box is Vu+Duo4K. One user in Estonia is interested and there may be several more.

I found from Wiki this https://wiki.openpli...Unicable_/_Jess

Please share your experience!


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #2 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,486 posts

+397
Excellent

Posted 30 November 2020 - 08:53

You‘d best take a look on the site of Jultec. I doubt whether your wishes can be forfilled. If your wishes might be forfilled it will be pretty expensive.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: FBC switch for several FBC LNBs #3 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 November 2020 - 10:12

Thank you, good answer. Is there anything else? This link explains, but how do our FBC use use this FBC part? I'm grateful if you share experience. I have a Lunix 3-4K box and a FBC LNB Dur-Line UK 124 – 24 users LNB SCR UNICABLE. I don't have any plans to spend more money, but I'd be interested to know, how would it be possible in the best way.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #4 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,486 posts

+397
Excellent

Posted 30 November 2020 - 10:33

My experience regarding Unicable II lnb is none. I do not own one so I can’t help overthere.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: FBC switch for several FBC LNBs #5 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 30 November 2020 - 17:50

There are basically two possibilities. As the FBC tuner only has two physical inputs, you're limited to that. That means you either just use the two inputs with automatic assignment, like you do with directly connected tuner or a DiSEqC setup. Or that you re-arrange the transponders in a way that all transponders you want receive are on the same cable, that is what SCR (Unicable, JESS) is all about.

 

So either you have the automatic assignment, which means you'll have one (or two, depending on how many inputs are physically connected) transponders guaranteed and up to eight transponder if you're lucky (same quadrant).

 

Or you're using SCR and you'll always have eight transponders available.

 

SCR and DiSEqC are mutually exclusive by design. Aside the fact they're using similar signalling techniques may confuse each other.

 

If you want the full FBC functionality (eight independent tuners), you'll have to invest in a SCR switch or SCR LNB's. The latter seems to be a lot cheaper, but also has some drawbacks.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: FBC switch for several FBC LNBs #6 Abu Baniaz

  • PLi® Contributor
  • 2,493 posts

+64
Good

Posted 30 November 2020 - 18:15

This question has been asked before with no clear answer.  Would be grateful if somebody could actually explain how to use multiple Jess LNBs on a setup.



Re: FBC switch for several FBC LNBs #7 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 30 November 2020 - 19:14

You mean Unicable LNB's without a switch?  JESS is a Unicable II protocol from Jultec, for their switches.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: FBC switch for several FBC LNBs #8 Abu Baniaz

  • PLi® Contributor
  • 2,493 posts

+64
Good

Posted 30 November 2020 - 19:36

Yes, I am referring to LNBs. What protocol are used for these LNB's please?
 

  • GT-Sat GT-S1DCSS24 SCR/dCSS Single Cable Unicable II LNB SCR24 with 1x Legacy Outputs
  • Inverto IDLU-32UL40-UNB00-0PP

 

I know that there is a combiner (nobody has ever posted a link to one or details) and an expensive programmer for the Inverto units.


Edited by Abu Baniaz, 30 November 2020 - 19:37.


Re: FBC switch for several FBC LNBs #9 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 November 2020 - 20:17

And such a splitter, but how to you use it?

https://www.inverto....itter-5-2400mhz

 

I will refer a letter from the Estonian user that we have in our forum. The salesman from HM Sat gives him such an explanation:

With one cable from your antenna you are able to Receiver and use one polarization out of 32. You could use more features of your box if you had 2 cables but even then you have just 2 of 32. The only way to use it fully would be unicable . The problem is unicable for more than 4 satellites is very uncommon and even we have not build such a system. Multisatellite reception and regular use of FBC tuners is not working at the moment.

There's probably a number of different ways to use the FBC!? It's a little confusing for me too. In Estonia we have a very common combination together with toroidal antenna a let say 10 LNBs. A lot of Sat entusiasts have this combination and from point of FBC it needs a understandable solution. Even if I don't want to buy it, but I want to figure out how it's meant to work.


Edited by zeros, 30 November 2020 - 20:33.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #10 Abu Baniaz

  • PLi® Contributor
  • 2,493 posts

+64
Good

Posted 30 November 2020 - 20:35

@Zeros, Jess/Unicable 2 and FBC are different technologies. Which are you asking about?



Re: FBC switch for several FBC LNBs #11 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 November 2020 - 20:41

Oh, I don't know that well. I want to use my eight FBC tuners targeted. I want to know what I need to do that.


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #12 Abu Baniaz

  • PLi® Contributor
  • 2,493 posts

+64
Good

Posted 30 November 2020 - 20:51

FBC tuners are "complexes". They have two physical connections. There are 8 demodulators. The signal wire or wires you provide to to the physical  connections determine  what the other 6/7 can be set to.

 

How many LNBs do you have and what type are they?



Re: FBC switch for several FBC LNBs #13 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 November 2020 - 21:13


OK, I'm actually asking for one of our Estonian forum users. He have 8 LNBs with toroidal-90, they're all normal, and he's gonna have to replace them anyway then. And he have Duo4K and he wants to use it fully. Fully == he wants to use all Duo4K tuners that can be used for his 8 different Satellite positions. He's willing to change LNBs, that's probably necessary, but he wants to know what and how. What else he needs to get the system to work.

 

About me, I have four satellites positions (LNBs). That's enough for me, that's all I need (19.2E, 13.0E, 5.0E, 0.9W). I have purchased for testing FBC LNB Dur-Line UK 124 – 24 users LNB SCR UNICABLE. I'm curious theoretically, if I had four of them, what would that be the matrix that switched them to?


Edited by zeros, 30 November 2020 - 21:18.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #14 Abu Baniaz

  • PLi® Contributor
  • 2,493 posts

+64
Good

Posted 30 November 2020 - 21:24

 

OK, I'm actually asking for one of our Estonian forum users. He have 8 LNBs with toroidal-90, they're all normal, and he's gonna have to replace them anyway then. And he have Duo4K and he wants to use it fully. Fully == he wants to use all Duo4K tuners that can be used for his 8 different Satellite positions. He's willing to change LNBs, that's probably necessary, but he wants to know what and how. What else he needs to get the system to work.

 

About me, I have four satellites positions (LNBs). That's enough for me, that's all I need (19.2E, 13.0E, 5.0E, 0.9W). I have purchased for testing FBC LNB Dur-Line UK 124 – 24 users LNB SCR UNICABLE. I'm curious theoretically, if I had four of them, what would that be the matrix that switched them to?

 

 

There is no such thing as FBC LNB. There are FBC tuners and Jess/Unicable (1/2) swithes/LNBs.

 

For your friend, how many physical connections does he have on his Duo 4. i.e does he have 1 card (two physical signal connections) or 2 cards (four physical connections)?  



Re: FBC switch for several FBC LNBs #15 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 30 November 2020 - 21:34

You can see an FBC tuner module as a module that can work in three modes:

  1. legacy mode, where it emulates a twin-tuner with 6 internal loop-through tuners, which can be connected dynamically to either A or B
  2. unicable mode, where you have 8 individual tuners that either talk to a unicable LNB (fixed SCRs or a Unicable switch (dynamic SCRs)
  3. mixed mode, where one input is used for unicable, and one for legacy mode.

mode 2 and 3 are in practical terms identical, as in mode 2 you use only one input.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: FBC switch for several FBC LNBs #16 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 November 2020 - 21:49

I think he has one, I'll specify that with him. I can understand from your Q, that if there were two, then one input and 4 LNBs and the other the rest of 4 LNBs? (4+4=8 as he wants). 
And obviously for four are made up some solution?


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #17 Abu Baniaz

  • PLi® Contributor
  • 2,493 posts

+64
Good

Posted 1 December 2020 - 03:34

Are you asking this?


If I connect 4 universal LNBs using a diseqc switch to one input and another 4 universal LNBs to the other input of an FBC tuner, can I set all 8 demodulators independently for each satellite?

 

As far as I know, the answer is "no".



Re: FBC switch for several FBC LNBs #18 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 1 December 2020 - 05:36

Thanks, no, I didn't ask you that, because I know that in that case, the answer is no. I explained that we're ready to swap 4 universal LNBs (in my case) and 8 universal LNBs (in my friends case) to Jess/Unicable (1/2) swithes/LNBs. That jess/Unicable switches is my question mark right now. Do I understand that what Frenske offered would be the solution? (In post #2). I want the answer to your Q on post #6.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #19 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 1 December 2020 - 06:52

Thanks WanWizard for your explanations, it helps understanding!

It would be interesting to know how Erik has made his system, I know he's working this thing.

 

And there's another easy way to do this with two cables- 

  • cable one with one Unicable II LNB (with all the beauty)
  • cable two with the rest of the system

 

That should be enough!? (my Lunix have two cable inputs, both are for FBC tuners)


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: FBC switch for several FBC LNBs #20 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 1 December 2020 - 07:28

For 8 positions you need two Jultec JESS switches (JPS1701-16 I think), each for 4 sat positions, around 1200 euro for the set.

 

You can also use wideband LNB's (they don't have High/Low), in which case one switch is enough for 8 positions. Probably not cheaper though, if you already own the quads.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users