hello,unfortunately with the new 8.0 image the internal dvd player on dm8000 does not work.
regards
OpenPli 8.0 dm8000 and dvd player
Started by 64pippo, 02 Jan 2021 01:15
21 replies to this topic
Re: OpenPli 8.0 dm8000 and dvd player #2
-
- PLi® Core member
- 57,206 posts
+700
Excellent
Posted 2 January 2021 - 09:11
Why? What do you mean with it does not work? Did you install the driver? Do you see an error with dmesg?
Edited by littlesat, 2 January 2021 - 09:13.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPli 8.0 dm8000 and dvd player #3
-
- Senior Member
- 85 posts
+3
Neutral
Posted 2 January 2021 - 10:01
when introducing a cd/dvd the player starts normally(you can hear it) but nothing appears on the screen,or in mediaplayer. i installed nothing, just libdvdscc because i remembered from the past that this sometimes was the reason for not working.with 7.3 it worked normally.
Re: OpenPli 8.0 dm8000 and dvd player #4
-
- Senior Member
- 5,518 posts
+115
Excellent
Posted 2 January 2021 - 12:38
Install DVDPlayer plugin and check if /dev/sr0 exists....
Met één been in het graf..... Helaas
Re: OpenPli 8.0 dm8000 and dvd player #5
-
- Senior Member
- 85 posts
+3
Neutral
Posted 2 January 2021 - 14:15
on the feed there is no dvd player plugin,where can i get it from?
Re: OpenPli 8.0 dm8000 and dvd player #6
-
- PLi® Core member
- 10,334 posts
+351
Excellent
Posted 2 January 2021 - 14:18
[ 8973.314642] usb 6-1: new high-speed USB device number 2 using ehci-brcm [ 8973.476417] usb-storage 6-1:1.0: USB Mass Storage device detected [ 8973.483062] scsi3 : usb-storage 6-1:1.0 [ 8974.487994] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208GB TS00 PQ: 0 ANSI: 0 [ 8974.497173] scsi 3:0:0:0: Attached scsi generic sg2 type 5 [ 8974.525964] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 8974.533473] cdrom: Uniform CD-ROM driver Revision: 3.20mdev.conf
sr[0-9] 0:0 664 @/usr/bin/bdpoll $MDEV -c
dvd player not mounted in udev
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: OpenPli 8.0 dm8000 and dvd player #7
-
- Senior Member
- 5,518 posts
+115
Excellent
Posted 2 January 2021 - 14:21
Hmmmm. My DM8000 went into retirement last summer (still working 100%)... Replaced by a VU+Ultimo 4K BTE running on VTi 15.0....
I have to flash a friend's receiver today.... Will check then....
I have to flash a friend's receiver today.... Will check then....
Met één been in het graf..... Helaas
Re: OpenPli 8.0 dm8000 and dvd player #8
-
- Senior Member
- 85 posts
+3
Neutral
Posted 2 January 2021 - 14:29
maybe somebody could send me the necessary dvd player files,so i couldt test it
Re: OpenPli 8.0 dm8000 and dvd player #9
-
- Senior Member
- 85 posts
+3
Neutral
Posted 2 January 2021 - 14:30
...install them and test it.
Re: OpenPli 8.0 dm8000 and dvd player #10
-
- PLi® Core member
- 10,334 posts
+351
Excellent
Posted 2 January 2021 - 15:09
When run '/usr/bin/bdpoll sr0 -c' create empty folder /media/'dvd video name'
Edited by Dimitrij, 2 January 2021 - 15:09.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: OpenPli 8.0 dm8000 and dvd player #11
-
- PLi® Core member
- 70,562 posts
+1,813
Excellent
Posted 2 January 2021 - 16:10
mdev.confsr[0-9] 0:0 664 @/usr/bin/bdpoll $MDEV -c
dvd player not mounted in udev
I've asked Erik to have a look.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 8.0 dm8000 and dvd player #12
-
- Senior Member
- 5,518 posts
+115
Excellent
Posted 2 January 2021 - 18:00
DVDPlayer plugin is still in the feed. Just checked...
Met één been in het graf..... Helaas
Re: OpenPli 8.0 dm8000 and dvd player #13
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 2 January 2021 - 18:03
We're looking at it. At the moment it looks the issue is in an area where Wanwizard has more expertise.
Beware that it's very difficult for us to test, because none of us have a DVD player connected (or available).
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: OpenPli 8.0 dm8000 and dvd player #14
-
- Senior Member
- 85 posts
+3
Neutral
Posted 2 January 2021 - 19:23
DVDPlayer plugin is still in the feed. Just checked...
you`re right mimisiku, and in 8.0 allready included,but unfortunately not working for the moment.
Re: OpenPli 8.0 dm8000 and dvd player #15
-
- PLi® Core member
- 70,562 posts
+1,813
Excellent
Posted 3 January 2021 - 20:03
Can you handle a commandline, or edit files via ftp?
If so, add this line to /etc/udev/rules.d/automount.rules:
SUBSYSTEM=="block", KERNEL=="sr?*", ACTION=="add", RUN+="/usr/bin/bdpoll %k -c"
restart the box, and check if DVD's now work?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 8.0 dm8000 and dvd player #16
-
- Senior Member
- 85 posts
+3
Neutral
Posted 4 January 2021 - 00:47
did the latest update,but only after inserting your file, dvd and cd are working now,it just doesen´t show any information about the cd:title,songname etc...but thanks anyway,for your help
Re: OpenPli 8.0 dm8000 and dvd player #17
-
- PLi® Core member
- 70,562 posts
+1,813
Excellent
Posted 4 January 2021 - 01:06
It will be in tomorrows release build update.
As for the rest, someone else needs to pick that up, I'll be offline for the forseeable future.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 8.0 dm8000 and dvd player #18
-
- Senior Member
- 85 posts
+3
Neutral
Posted 4 January 2021 - 17:13
did todays update, dvd+cd working,but unfortunately still no infos about the cd...
Re: OpenPli 8.0 dm8000 and dvd player #19
-
- Senior Member
- 85 posts
+3
Neutral
Posted 7 January 2021 - 17:09
did todays update, dvd+cd working,but unfortunately still no infos about the cd...
anybody an idea?
Re: OpenPli 8.0 dm8000 and dvd player #20
-
- Senior Member
- 1,140 posts
+74
Good
Posted 7 January 2021 - 20:24
Hi,
which cd (audiocd ?)
if yes maybe a program is missing like cdda2wav or i found also a plugin with name enigma2-plugin-extensions-cdinfo
opkg list | grep cdinf enigma2-plugin-extensions-cdinfo - z-git4980+74bb66c-r0.0 - Enigma2 Plugin: extensions-cdinfo
regards
Pike
Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K
Image: OpenPLI-8.3
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
