I tested the current state of lunix3-4k; with
openpli-develop-lunix3-4k-20210103_usb
openpli-8.0-release-lunix3-4k-20210104_usb
and
openvision-enigma2-develop-extralanguage-python2-10.2-r310-lunix34k_usb
--
Posted 5 January 2021 - 17:47
I tested the current state of lunix3-4k; with
openpli-develop-lunix3-4k-20210103_usb
openpli-8.0-release-lunix3-4k-20210104_usb
and
openvision-enigma2-develop-extralanguage-python2-10.2-r310-lunix34k_usb
--
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 5 January 2021 - 21:45
I sent this report to DAGS too, I hope they're making in 2021 a new driver, which solves this problem.
There's nothing else I can do. From PLi, I'd leave it as it is- maybe it pushes!?
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 25 August 2021 - 18:29
This problem was solved with DVB driver version 2021-04-27, I reported it also here:
https://forums.openp...stand-by/page-2
About Kodi, I have not tested it yet, I’ll do it this weekend!
And abot that, it's a known mistake and not related with multiboot or openpli 8.1:
—
On openwebif isnt working screen capture but i dont know if it s related with multiboot or openpli 8.1
—
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 25 August 2021 - 20:00
No, the problem is that grab fails to open the device device for RO because the driver has the video open in exclusive mode. All Qviart/Xsarius models have that problem.
You can see the error if you strace it on the commandline.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 August 2021 - 09:24
The Qviart Lunix4K (not the 3) is still not able to reboot, its remains stuck at reboot only way is to power off / power on.
Zeros can you please escalate this to Qviart?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 26 August 2021 - 13:20
Also if you use "reboot" or "shutdown -h now" ?
Does it get stuck on the reboot itself, or during the bootup (at the qviart bootlogo)?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 August 2021 - 14:00
When using reboot from the command line, the box reboot properly the background is displayed and then nothing happens.
power off/on the box reboot normally.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 26 August 2021 - 15:06
Not sure what this is, but multiple boxes have this problem, not only on a "normal" reboot, but also with the reboot after flash.
The image simply doesn't boot (the manufacturer logo is displayed by the bootloader) after a software reboot
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 August 2021 - 18:57
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 26 August 2021 - 19:54
I can't report this problem because I don't have any more information and I don’t have this box for tests. When I reported it, they wanted all kinds of things like a serial log and stuff. But I can ask again about the screenshot (video) bug- what WanWizard said *because the driver has the video open in exclusive mode*.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 1 September 2021 - 13:29
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Posted 1 September 2021 - 13:30
Kodi is only available on boxes for which the manufacturer has enabled it, as it needs hardware specific graphics drivers.
So Kodi improvements doesn't mean kodi available on more hardware.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 September 2021 - 15:22
about kodi on lunix4k, nothing has changed, we have since years these settings:
# Qviart
EXTRA_OECMAKE_append_lunix4k = " -DWITH_V3D=nxcl"
I was just curious about it at runtime.
If it is not in the feed most probably the BSP has not enabled kodi in MACHINE_FEATURES.
Other BSP's do add ikodi to OPENPLI_FEATURES.
In one or the other way it should be built and in the feeds.
A.A.Posted 1 September 2021 - 15:58
When I'm back from holiday I can see if it builds, and if so, kick Dags to get the BSP updated. Ping me in a few weeks time...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 September 2021 - 17:34
HbbTV Plugin not working (unfortunately). If you press the red button, you'll have a white screen that you can't find out any other way than via a power button from behind. I tried it just in case, otherwise everything's pretty good!
Edited by zeros, 1 September 2021 - 17:36.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
0 members, 1 guests, 0 anonymous users