Posted 25 January 2021 - 08:38
In last few days tested wifi dongles with Vu+
Solo2
Duo2
Solo-se V2 ( my brother's box)
Zgemma H9s (my brother;s box)
-tplink723N (Version 2)
-tplink-wn727N
-vu+ official (Black)
- 8192cu
- 8712u
- rt73
- rt2870
- rt3572sta
- rt5370sta
- rtl8187
- zd1211
These are most common and well known available models in the market .
Working seamlessly
Thanks to Openpli team
DM-900 ,DM-520, Vu+Duo2
Posted 5 February 2021 - 06:59
Good Morning
Wish you all will be fine and enjoying good health .
after 3 days test I find kodi (with vpn) is working fine at my side.
I have tested in solo4k and dou4k with fallowing rep & plugin.
image installed Openpli 8 development .
repository.tempest-0.0.5
repository.temptv-0.0.5
repository.temptv-0.0.5
repository.covenant-0.1
plugin.video.uwc-1.2.42
plugin.video.filmon-4.6.8
plugin.video.videodevil-1.8.7
Thanks Open Pli team for their hard work.
Edited by Aliraza63, 5 February 2021 - 07:00.
DM-900 ,DM-520, Vu+Duo2
Posted 10 February 2021 - 09:04
Hi
Good Morning all
I want to know about vu duo2 buitin wifi driver and version ?.
which is being used in Open Pli 8.0 development .
I dont see builtin wifi in network section according to mother board it has RTL8211 chip.
2163-c80cbb16a66c33de986fc48468fe9103.jpg 88.44KB
4 downloads
Edited by Aliraza63, 10 February 2021 - 09:04.
DM-900 ,DM-520, Vu+Duo2
Posted 10 February 2021 - 14:39
The RTL8211EG is the ethernet PHY, the fixed 10/100/1000 ethernet chip.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 16 February 2021 - 14:44
The RTL8211EG is the ethernet PHY, the fixed 10/100/1000 ethernet chip.
Thanks for the answer . its builtin wifi is usb base and have RT5372L chip on it,
I have found it was my board's fault which was not showing .finally fixed and tested
It working flawlessly . It was not image's fault . Image is awesome as like always.
Thanks Open Pli team .
DM-900 ,DM-520, Vu+Duo2
Posted 18 February 2021 - 14:25
root@vusolo4k:~# opkg upgrade Collected errors: * Solver encountered 1 problem(s): * Problem 1/1: * - nothing provides requested media-ctl * * Solution 1: * - do not ask to install a package providing media-ctl root@vusolo4k:~# opkg list | grep media-ctl media-ctl - 1.16.5-r0.6 - v4l2 and IR applications root@vusolo4k:~# opkg remove media-ctl Collected errors: * Solver encountered 1 problem(s): * Problem 1/1: * - nothing provides requested media-ctl * * Solution 1: * - do not ask to install a package providing media-ctl root@vusolo4k:~# opkg install media-ctl Collected errors: * Solver encountered 1 problem(s): * Problem 1/1: * - nothing provides requested media-ctl * * Solution 1: * - do not ask to install a package providing media-ctlThis fix the problem
opkg install --force-reinstall media-ctl Downloading http://downloads.openpli.org/feeds/openpli-develop/armv7ahf-neon/media-ctl_1.16.5-r0.6_armv7ahf-neon.ipk. Installing media-ctl (1.16.5) on root Configuring media-ctl.
Edited by Pr2, 18 February 2021 - 14:28.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 18 February 2021 - 18:58
Next time, do a "opkg info <package>" first, that will tell you in what state opkg thinks the package is.
You get these issues if it is in a "part-installed" state, which can happen if for example a post script doesn't return 0.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 22 February 2021 - 14:40
Due to lots of changes and updates Softcams and config files should be updated in feed .
DM-900 ,DM-520, Vu+Duo2
Posted 22 February 2021 - 14:48
What do you mean?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 23 February 2021 - 09:05
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message 
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 24 February 2021 - 05:34
We only support basic configs for oscam softcam which at least will support smartcard with a valid subscription.
I don’t see the need to update those configs but maybee you can give me the benefit of updating or changing the configs...
Good Morning .
Thanks for your reply .now its clear to me these are basic working files in feed.
Yes I share all my configs which are modified and working flawlessly in (ARM,MIPS)
I dont say those files will be updated in feed but just for the knowledge and information purpose I shall share with the Open Pli team .
Once again more thanks all of you for your help and support .
Oscam-Config.rar 110.32KB
52 downloads
CCcam.prio & CCcam.info updated.rar 119.89KB
28 downloads
Ncam-config.rar 50.7KB
28 downloads
DM-900 ,DM-520, Vu+Duo2
Posted 2 May 2021 - 12:27
Hi all friends and OpenPli team
Which is next version is going to launch 8.1 or 9.0?
Can you please add Epg translator in feed ?
Thanks for the support and hardwork.
DM-900 ,DM-520, Vu+Duo2
Posted 2 May 2021 - 12:41
The next version will be 8.1.
Regarding your request of adding the epg translator plugin someone else can offer you that information.
AFAIK we can / will only add plugins when we have the sources. But, as I am not a developer let’s wait for a more experienced member.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 14 May 2021 - 09:19
Last update 13/05/2021 on Vu+ DUO4K.
Impossible to connect to the box (bad password ??).
I can connect with OpenWebIf but it is very difficult to see a channel (bad connection).
I use a Wifi connection on 2.4 GHz bandwith. In network parameters the SSID isn't visible.
Network connection works but the download speed is lower than the internet box.
Edited by dudule22, 14 May 2021 - 09:24.
Posted 14 May 2021 - 10:35
Edited by littlesat, 14 May 2021 - 10:36.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 14 May 2021 - 12:38
I change password by telnet. I have a password.
By telnet port 23 it works but not via ssh port 22.
It was ok before.
Edited by dudule22, 14 May 2021 - 12:42.
Posted 14 May 2021 - 18:15
well, I hit the very same issue after (massive - 520 packages?) update on 12.05 on my vs1500,
when tried to connect through ssh I was getting "Permission denied (publickey,password)"
and after I updated today the issue has mysteriously gone (?)
to be honest no idea what was the cause, can't see nothing ssh related in recent commits? odd...
Posted 14 May 2021 - 18:16
On develop such things are always possible, especially with massive changes. It's better to flash in such cases...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 15 May 2021 - 15:23
After the last flash all work fine.
Posted 24 May 2021 - 14:16
in today's nightly build, missing 1 plugin ?
root@vuduo4kse:~# opkg install enigma2-plugin-softcams-oscam-emu
Collected errors:
* Solver encountered 1 problem(s):
* Problem 1/1:
* - nothing provides enigma2-plugin-extensions-oscamstatus needed by enigma2-plugin-softcams-oscam-emu-git1961+da98666-r0.1.armv7ahf-neon
*
* Solution 1:
* - do not ask to install a package providing enigma2-plugin-softcams-oscam-emu
Edited by madiv, 24 May 2021 - 14:19.
0 members, 2 guests, 0 anonymous users
