20 replies to this topic

[k0b]

Hi all,
I'm new to this forum so I would like to say hello to everyone.
I'm using my zgemma for more than 1 year and for my 1st system I have chosen openpli and like till today.

I was looking for an answer for my question in lots of forums but no success.

My question is, can I have PIP on this box? O can't find anything in plugins.

Can anyone help?
Thx

[betacentauri]

Yes, you can use PiP.
Press blue while you are watching tv. If PiP option is not visible there, then you need to go to Menu > standby/restart > Multiboot image selector.
Let’s say you have only one image installed. Then you should see “Slot 1 mode 1” and “slot 1 mode 12”. Select mode 12. This restarts your box and pip should be available.

[ims]

Zgemma H7 supports PiP without any plugin. Box must be in "mode 12" ... go to Menu -> Standy/restart -> Multiboot ... and select item with "mode 12".

After restart you can use PiP: open Chanel list (CH+/CH-), press Menu - select Blue (Play as PiP) and that's all.
 

[k0b]

I have done all as advised but by using this multiboot with mode 12 TV went black screen & only audio.
Luckily I was able to use web interface and switch back to mode 1.

But I think this is a different problem .

Any advice?

Edited by k0b, 18 January 2021 - 10:17.

[betacentauri]

When you switch to mode 12, the box support less video resolutions. Some 4K resolution is not supported. Maybe set output to 1080p and then test again.

[k0b]

Just tested all available resolutions, no success. To clarify I'm using iPad to watch stream of images on web interface so I can navigate with remote..
All resolutions below 1080p = black screen. Only once I had white blinked screen but still black.

I can confirm that I saw "pip" options under blue key but can't use that due to no image on TV. :/

[betacentauri]

So with mode 12 you have a black screen on all channels? And you cannot see the menu on the TV?
And with mode 1 all is ok?

[ims]

try reboot or deep standby and unplug/plug power

[k0b]

So with mode 12 you have a black screen on all channels? And you cannot see the menu on the TV?
And with mode 1 all is ok?

Yes, when I change back to 1 I can see image on TV

[littlesat]

In mode12 the videodecoder is limited... and cannot show 'everything' anymore... that is the offer when you want PIP on this 'limited' SOC...

[ims]

In mode 12 is not possible use 60Hz for me on H7S.

[littlesat]

By example indeed...

[k0b]

try reboot or deep standby and unplug/plug power

Problem solved , deep standby solutions works.

Works only up to 1080p 50hz.

New problem...., when I was using pip and in the same time start playing with resolution I got black screen but before whole tv screen was flickering and then went black.
Deep standby solutions worked and solve this issue.

Any ideas why I got this flickering screen?

[Aliraza63]

 

try reboot or deep standby and unplug/plug power

Problem solved , deep standby solutions works.

Works only up to 1080p 50hz.

New problem...., when I was using pip and in the same time start playing with resolution I got black screen but before whole tv screen was flickering and then went black.
Deep standby solutions worked and solve this issue.

Any ideas why I got this flickering screen?

 

again seems a screen resolution . did u try it with 1080i/720p ?

seems screen buffer size issue 

go to menu and disable auto resolution detection .

[k0b]

Yep, problem solved

Thanks for your help guys.

[lory]

Hello ... I need help, I can not turn it on

pip openATV 7.2

[neo]

Ask on the ATV forum?

[lory]

Ок. спрошу 

[lory]

Ask on the ATV forum?

  are silent... opena.tv

 writing here

[neo]

We can't comment on what they have or haven't implemented in their software.