12 replies to this topic

[vit]

Hello sorry for the trouble again,

after three days of perfect functioning of my (Vu + Duo 4Kse) I noticed that by restarting Enigma2 the Dual DVB-T2 tuner (I) remains disabled while the tuner (J) is enabled and working correctly, I just go into the tuners settings, re-enable the tuner (I) which works correctly until I restart Enigma2.

I hope I was clear, I am using google translate.

Thanks

[Frenske]

We have two members with a combination Duo 4K (not the SE) + a dual T2 tuner inside.

Perhaps they can respond.

[Dimitrij]

We have two members with a combination Duo 4K (not the SE) + a dual T2 tuner inside.

Perhaps they can respond.

Duo 4K there are no such problems.

[ccs]

@vit Which dvb-t2 tuner are you using, I've never got 3*dual T2 tuners working in an ultimo4k, tuner F has to be permanently disabled.

Edited by ccs, 19 January 2021 - 15:30.

[Dimitrij]

Vu + duo 4kse problem tuner sat

[ccs]

Vu + duo 4kse problem tuner sat

I think he's already swapped the tuners round (link below), this appears to be another problem.

 

Problem with the tuner DVB-S2X FBC Twin - [EN] Enduser support - Forums (openpli.org)

[vit]

That's right @CCS this is another problem 

[betacentauri]

OpenPLi cannot handle switch of the tuners properly. Some informations are still in the /etc/enigma2/settings file which prevent saving the config properly.

Solution depends a little bit on the knowledge of the user.
vit can you access the receiver eg via Windows network environment? Can you edit a file with a Linux compatible editor ?
If yes, download /etc/enigma2/settings file and post it here (maybe first look into it whether passwords are stored in the file and remove them).

Other solution is to flash the box without restoring the settings backup.

[vit]

Yes, of course tonight when I get home I am attaching the file setting.

Thanks

[vit]

Here is my settings file:

 

Attached Files

•  settings.txt   4.6KB   9 downloads

[Dimitrij]

config.Nims.0.diseqcA=130
config.Nims.0.diseqcMode=single
config.Nims.0.terrestrial=Italia (Europe DVB-T/T2)
config.Nims.1.diseqcA=130
config.Nims.1.diseqcMode=single
config.Nims.1.powerMeasurement=false
config.Nims.1.terrestrial=Italia (Europe DVB-T/T2)
config.Nims.2.advanced.lnb.1.lof=unicable
config.Nims.2.advanced.lnb.1.scrList=1
config.Nims.2.advanced.lnb.1.unicableManufacturer=Dura-Sat(DUR-line)
config.Nims.2.advanced.lnb.1.unicableProduct=UK101
config.Nims.2.advanced.sat.130.lnb=1
config.Nims.3.advanced.lnb.1.lof=unicable
config.Nims.3.advanced.lnb.1.scrList=1
config.Nims.3.advanced.lnb.1.unicableManufacturer=Ankaro
config.Nims.3.advanced.lnb.1.unicableProduct=UCS 51440
config.Nims.3.advanced.sat.130.lnb=1
config.Nims.4.advanced.lnb.1.lof=unicable
config.Nims.4.advanced.lnb.1.scrList=1
config.Nims.4.advanced.lnb.1.unicableManufacturer=Dura-Sat(DUR-line)
config.Nims.4.advanced.lnb.1.unicableProduct=UK101
config.Nims.4.advanced.sat.130.lnb=1
config.Nims.5.advanced.lnb.1.lof=unicable
config.Nims.5.advanced.lnb.1.scrList=1
config.Nims.5.advanced.lnb.1.unicableManufacturer=Dura-Sat(DUR-line)
config.Nims.5.advanced.lnb.1.unicableProduct=UK101
config.Nims.5.advanced.sat.130.lnb=1
config.Nims.6.advanced.lnb.1.lof=unicable
config.Nims.6.advanced.lnb.1.scrList=1
config.Nims.6.advanced.lnb.1.unicableManufacturer=Dura-Sat(DUR-line)
config.Nims.6.advanced.lnb.1.unicableProduct=UK101
config.Nims.6.advanced.sat.130.lnb=1
config.Nims.7.advanced.lnb.1.lof=unicable
config.Nims.7.advanced.lnb.1.scrList=1
config.Nims.7.advanced.lnb.1.unicable=unicable_matrix
config.Nims.7.advanced.lnb.1.unicableManufacturer=Ankaro
config.Nims.7.advanced.lnb.1.unicableProduct=UCS 51440
config.Nims.7.advanced.lnb.65.lof=unicable
config.Nims.7.advanced.lnb.65.powerMeasurement=false
config.Nims.7.advanced.lnb.65.scrList=1
config.Nims.7.advanced.lnb.65.unicableManufacturer=Dura-Sat(DUR-line)
config.Nims.7.advanced.lnb.65.unicableProduct=UK101
config.Nims.7.advanced.sat.130.lnb=1
config.Nims.7.advanced.sat.3601.lnb=65
config.Nims.8.advanced.sat.130.lnb=1
config.Nims.8.configMode=nothing
config.Nims.8.connectedTo=9
config.Nims.8.terrestrial=Italia (Europe DVB-T/T2)
config.Nims.9.advanced.lnb.1.prio=10
config.Nims.9.advanced.sat.130.lnb=1
config.Nims.9.advanced.sat.130.tonemode=on
config.Nims.9.connectedTo=8
config.Nims.9.diseqcA=130
config.Nims.9.diseqcB=3601
config.Nims.9.diseqcC=3601
config.Nims.9.diseqcD=3601
config.Nims.9.diseqcMode=single
config.Nims.9.terrestrial=Italia (Europe DVB-T/T2)

a factory reset may help.
 

[betacentauri]

Whole config looks strange.

That's what I meant. Nim 0 and 1 aren't DVB-T anymore, but config elements are still there. And Nim8 and 9 are no DVB-S tuners anymore and make now trouble.

 

Maybe try this. Stop e2 in telnet

init 4

Make a backup of the /etc/enigma2/settings file. Then edit the file with a linux compatible editor and remove all "config.Nims...." lines.

Then start e2 again:

init 3

Now you need to configure again your tuners. But you don't loose all other settings.

 

If that don't work, use factory reset like Dimitrij wrote, but all settings and I think channel bouquets will be deleted.

[vit]

This problem has also been fixed:

As suggested by "PLi® Core member", I have

modified the /etc/enigma2/settings file by removing

all lines "config.Nims ....".

Thanks for your availability.