According to new procedure of 21/04/2020
Amiko Viper 4K, Gigablue UHD Trio 4K and Octagon SF8008.
1) Download recovery_emmc.zip for your model receiver from www.openvix.co.uk.
2) Extract the zip file.
3) In the extracted file you will see the following files:
- apploader.bin
- bootargs.bin
- fastboot.bin
- imageversion
- usb_update.bin
4) Copy the above 5 files directly to root of your USB stick.
5) Ensure your receiver is powered off and connect USB stick to USB port on your receiver.
6) Amiko Viper 4K & Gigablue UHD Trio 4K hold down REAR reset button and power on while hold this down. Octagon SF8008 hold down front Stanby button and power on whilst holding this down. Once UPDT appears on front screen release reset button or power button, whichever applies to your receiver.
8) Once completed your receiver will boot into your previously flash image. If the receiver gets stuck on boot it just means you need to flash a new image. Either way NEW IMAGE HAS TO BE FLASHED.
9) Due to flash partion re-sizing you now need to flash a new image.
10) Power off, BUT ENSURE RECOVERY IMAGE FLASHING IS COMPLETED BEFORE POWERING OFF.
11) Download the image ZIP file for your receiver. Image zip file ends in simply 'mmc.zip'.
12) Copy the complete 'ZIP' file to root of USB stick, DO NOT UNZIP.
13) Amiko Viper 4K & Gigablue UHD Trio 4K hold down REAR reset button and power on while hold this down. Octagon SF8008 hold down front Stanby button and power on whilst holding this down. Once UPDT appears on front screen release reset button or power button, whichever applies to your receiver.
For more detail info
https://www.world-of...dure-21-04-2020
But in our download section the available files for octagon are not in mmc.zip
https://openpli.org/.../octagon/SF8008
How to install it when box menu already updated and download file cant be seen in multiboot menu ?
Edited by Aliraza63, 24 January 2021 - 11:37.