OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player

Started by csm, 07 Feb 2021 23:03

Please log in to reply

15 replies to this topic

#1 csm

Senior Member
96 posts

+2

Neutral

Posted 7 February 2021 - 23:03

@ All

Leider geht das abspielen von DVD´s mit einem externen USB Laufwerks nicht bei dieser Box.

Könntet Ihr mir helfen dieses in den griff zu kriegen

Gruß CSM

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #2 Jork

Senior Member
822 posts

+13

Neutral

Posted 9 February 2021 - 20:23

Via telnet (z.b. Putty) nächstes nach installieren und dann neustart.

opkg update
opkg install kernel-module-sr-mod
opkg install kernel-module-isofs
opkg install kernel-module-udf
opkg install kernel-module-cdfs
modprobe isofs
modprobe sr_mod
modprobe cdrom
modprobe cdfs
opkg install libdvdcss2

Dann findet mann DVD laufwerk unter Video (..)

Edited by Jork, 9 February 2021 - 20:25.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #3 littlesat

PLi® Core member
57,176 posts

+698

Excellent

Posted 9 February 2021 - 20:53

Mmmm

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #4 Jork

Senior Member
822 posts

+13

Neutral

Posted 11 February 2021 - 14:37

Uhrsache die module (kernel treiber) cdrom und scsi sind standard nicht present in OpenPli.
Deshalb nachinstallieren notwendig.
Das abspielen von CD-audio (cda) ist nur möglich wenn mann standard enigma2 playback system benutzt und nicht exteplayer3 anwählt.
DVD kein problem beim abspielen hier.
Erwarte keine ausführliche sachen sowie track-artist-titel anzeige.
Es ist ein hobby projekt.

Edited by Jork, 11 February 2021 - 14:39.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #5 csm

Senior Member
96 posts

+2

Neutral

Posted 12 February 2021 - 14:48

@ All

Habe probiert alles nachzuinstallieren

Leider kommen dort einige Fehler

Was kann ich dagegen tun

root@gbquad4k:~# opkg install kernel-module-sr-mod

No packages installed or removed.

root@gbquad4k:~# opkg install kernel-module-isofs

Collected errors:

* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'kernel-module-isofs'.

root@gbquad4k:~# opkg install kernel-module-udf

No packages installed or removed.

root@gbquad4k:~# opkg install kernel-module-cdfs

Collected errors:

* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'kernel-module-cdfs'.

root@gbquad4k:~# modprobe isofs

root@gbquad4k:~# modprobe sr_mod

root@gbquad4k:~# modprobe cdrom

root@gbquad4k:~# modprobe cdfs

modprobe: FATAL: Module cdfs not found in directory /lib/modules/4.1.20-1.9

root@gbquad4k:~# opkg install libdvdcss2

No packages installed or removed.

root@gbquad4k:~#

Danke schon mal im vorraus für Eure hilfe

Gruß CSM

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #6 Jork

Senior Member
822 posts

+13

Neutral

Posted 12 February 2021 - 15:40

Es scheint das wichstigste war schon da. Was passiert wenn Sie DVD reinschieben? Haben Sie Mediaplayer auch installiert?

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #7 Jork

Senior Member
822 posts

+13

Neutral

Posted 12 February 2021 - 15:52

dmesg output:
[ 593.969726] sr 19:0:0:0: Attached scsi CD-ROM sr0
[ 593.970126] sr 19:0:0:0: Attached scsi generic sg0 type 5
[ 2345.878951] usb 4-1.4: USB disconnect, device number 42
[ 2350.306591] usb 4-1.3: new high-speed USB device number 43 using ehci-brcm
[ 2350.430504] usb-storage 4-1.3:1.0: USB Mass Storage device detected
[ 2350.436996] scsi host20: usb-storage 4-1.3:1.0
[ 2351.458620] scsi 20:0:0:0: CD-ROM HL-DT-ST BD-RE BP55EB40 1.00 P Q: 0 ANSI: 0
[ 2351.559572] sr 20:0:0:0: [sr0] scsi3-mmc drive: 0x/24x writer dvd-ram cd/rw x a/form2 cdda tray
[ 2351.569750] sr 20:0:0:0: Attached scsi CD-ROM sr0
[ 2351.570550] sr 20:0:0:0: Attached scsi generic sg0 type 5
root@gbquad4k:~# lsusb
Bus 002 Device 002: ID 05e3:0620
Bus 004 Device 002: ID 05e3:0610
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 004 Device 043: ID 067b:2571
root@gbquad4k:~# lsmod
Module Size Used by
btusb 51907 0
bthid 4238 0
dvb 1879112 50
nexus 4902173 5 dvb
sr_mod 11784 0
cdrom 41499 1 sr_mod

Attached Files

DVD mediaplayer.jpg 229.57KB 1 downloads

Edited by Jork, 12 February 2021 - 15:54.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #8 csm

Senior Member
96 posts

+2

Neutral

Posted 12 February 2021 - 16:18

@ All

Mediaplayer ist installiert

die DVD liest , liest dreht hoch liest , liest hört auf und alles geht wieder von vorne los

und das kommt wenn ich dmesg output: eingebe Putty

openpli 8.0-release gbquad4k

gbquad4k login: root

Last login: Fri Feb 12 16:08:09 CET 2021 on pts/0

root@gbquad4k:~# dmesg output:

[ 0.000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 9.2.0 (GCC) ) #1 SMP Fri Dec 25 19:54:24 UTC 2020

[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[ 0.000000] Machine model: gbquad4k

[ 0.000000] moving dtb from 0x0000000007624000 to 0x000000000098b788

[ 0.000000] bmem: Reserved 529 MiB at 0x000000001eb00000

[ 0.000000] bmem: Reserved 608 MiB at 0x000000009a000000

[ 0.000000] cma: Reserved 16 MiB at 0x0000000098c00000

[ 0.000000] Forcing write-allocate cache policy for SMP

[ 0.000000] Memory policy: Data cache writealloc

[ 0.000000] On node 0 totalpages: 524288

[ 0.000000] DMA zone: 964 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 123392 pages, LIFO batch:31

[ 0.000000] HighMem zone: 400896 pages, LIFO batch:31

[ 0.000000] PERCPU: Embedded 12 pages/cpu @dd1ab000 s16844 r8192 d24116 u49152

[ 0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523324

[ 0.000000] Kernel command line: root=/dev/mmcblk0p5 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m

[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.000000] Memory: 889544K/2097152K available (6683K kernel code, 325K rwdata, 2184K rodata, 320K init, 213K bss, 1191224K reserved, 16384K cma-reserved, 422904K highmem)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

[ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xde300000 ( 483 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .text : 0xc0008000 - 0xc08b11f0 (8869 kB)

[ 0.000000] .init : 0xc08b2000 - 0xc0902000 ( 320 kB)

[ 0.000000] .data : 0xc0902000 - 0xc0953738 ( 326 kB)

[ 0.000000] .bss : 0xc0956000 - 0xc098b788 ( 214 kB)

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2

[ 0.000000] NR_IRQS:16 nr_irqs:16 16

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde802000, parent irq: 93)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde808000, parent irq: 64)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80aa00, parent irq: 65)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80c640, parent irq: 95)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80e200, parent irq: 58)

[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)

[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xde810380, parent IRQ(s): 3)

[ 0.000000] MCP: Enabling write pairing

[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).

[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns

[ 0.000002] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns

[ 0.000010] Switching to timer-based delay loop, resolution 37ns

[ 0.000341] Console: colour dummy device 80x30

[ 0.000359] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)

[ 0.000367] pid_max: default: 32768 minimum: 301

[ 0.000458] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.000463] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.000886] CPU: Testing write buffer coherency: ok

[ 0.001094] CPU0: update cpu_capacity 1024

[ 0.001099] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[ 0.001311] Setting up static identity map for 0x8480 - 0x84d8

[ 0.003949] CPU1: update cpu_capacity 1024

[ 0.003954] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[ 0.004018] Brought up 2 CPUs

[ 0.004028] SMP: Total of 2 processors activated (108.00 BogoMIPS).

[ 0.004033] CPU: All CPU(s) started in SVC mode.

[ 0.004362] devtmpfs: initialized

[ 0.013469] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0

[ 0.013692] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[ 0.015041] NET: Registered protocol family 16

[ 0.015697] DMA: preallocated 256 KiB pool for atomic coherent allocations

[ 0.021125] cpuidle: using governor ladder

[ 0.030136] cpuidle: using governor menu

[ 0.037305] No ATAGs?

[ 0.037332] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[ 0.037337] hw-breakpoint: maximum watchpoint size is 8 bytes.

[ 0.037551] Broadcom Brahma-B15 readahead cache at: 0xde954478

[ 0.052664] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)

[ 0.052853] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)

[ 0.053184] SCSI subsystem initialized

[ 0.053664] libata version 3.00 loaded.

[ 0.053889] usbcore: registered new interface driver usbfs

[ 0.053936] usbcore: registered new interface driver hub

[ 0.053982] usbcore: registered new device driver usb

[ 0.054053] Linux video capture interface: v2.00

[ 0.054129] pps_core: LinuxPPS API ver. 1 registered

[ 0.054134] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 0.054154] PTP clock support registered

[ 0.054632] Advanced Linux Sound Architecture Driver Initialized.

[ 0.055521] Switched to clocksource arch_sys_counter

[ 0.055735] FS-Cache: Loaded

[ 0.062805] thermal thermal_zone0: failed to read out thermal zone (-22)

[ 0.062916] NET: Registered protocol family 2

[ 0.063271] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.063294] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.063332] TCP: Hash tables configured (established 4096 bind 4096)

[ 0.063371] UDP hash table entries: 256 (order: 1, 8192 bytes)

[ 0.063383] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[ 0.063483] NET: Registered protocol family 1

[ 0.063713] RPC: Registered named UNIX socket transport module.

[ 0.063719] RPC: Registered udp transport module.

[ 0.063724] RPC: Registered tcp transport module.

[ 0.063729] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.063745] PCI: CLS 0 bytes, default 64

[ 0.064109] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]

[ 0.064146] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available

[ 0.065041] futex hash table entries: 512 (order: 3, 32768 bytes)

[ 0.066005] NFS: Registering the id_resolver key type

[ 0.066034] Key type id_resolver registered

[ 0.066038] Key type id_legacy registered

[ 0.066052] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.066058] Installing knfsd (copyright © 1996 okir@monad.swb.de).

[ 0.066200] FS-Cache: Netfs 'cifs' registered for caching

[ 0.066239] Key type cifs.spnego registered

[ 0.066352] fuse init (API version 7.23)

[ 0.067386] bounce: pool size: 64 pages

[ 0.067420] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 0.067431] io scheduler noop registered

[ 0.067438] io scheduler deadline registered

[ 0.067450] io scheduler cfq registered (default)

[ 0.067703] brcm-gisb-arb f0400000.gisb-arb: registered mem: de97c000, irqs: 261, 262

[ 0.068428] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)

[ 0.068835] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT

[ 0.169017] brcm-pci f0460000.pcie: link down

[ 0.169064] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT

[ 0.269229] brcm-pci f0490000.pcie: link down

[ 0.270603] brcmstb_memc f1102000.memc-ddr: registered

[ 0.270642] brcmstb_memc f1182000.memc-ddr: registered

[ 0.270831] brcm-waketimer f0417580.waketimer: registered, with irq 263

[ 0.271042] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[ 0.272136] console [ttyS0] disabled

[ 0.272162] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A

[ 1.009015] console [ttyS0] enabled

[ 1.012895] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A

[ 1.022166] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A

[ 1.034494] loop: module loaded

[ 1.038553] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM

[ 1.045971] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3

[ 1.052014] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled

[ 1.069532] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

[ 1.078516] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part

[ 1.088003] scsi host0: brcm-ahci

[ 1.091578] scsi host1: brcm-ahci

[ 1.095054] ata1: FORCE: PHY spd limit set to 3.0Gbps

[ 1.100119] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91

[ 1.108049] ata2: FORCE: PHY spd limit set to 3.0Gbps

[ 1.113110] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91

[ 1.121044] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered

[ 1.128081] brcmstb_qspi f03e3400.spi: using bspi-mspi mode

[ 1.133726] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found

[ 1.139762] brcmstb_qspi: probe of f03e3400.spi failed with error -22

[ 1.146239] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode

[ 1.152389] m25p80 spi32766.0: found n25q032, expected m25p80

[ 1.158156] m25p80 spi32766.0: n25q032 (4096 Kbytes)

[ 1.163153] 5 ofpart partitions found on MTD device spi32766.0

[ 1.168997] Creating 5 MTD partitions on "spi32766.0":

[ 1.174147] 0x000000000000-0x000000100000 : "flash0.bolt"

[ 1.180068] 0x000000100000-0x000000110000 : "flash0.macadr"

[ 1.186092] 0x000000110000-0x000000120000 : "flash0.nvram"

[ 1.192015] 0x000000120000-0x000000130000 : "flash0.devtree"

[ 1.198109] 0x000000000000-0x000000400000 : "flash0"

[ 1.204143] libphy: Fixed MDIO Bus: probed

[ 1.208699] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001

[ 1.214596] bcmgenet f0b00000.ethernet: failed to get enet-mux clock

[ 1.232533] ata1: SATA link down (SStatus 0 SControl 320)

[ 1.233526] libphy: bcmgenet MII bus: probed

[ 1.254370] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k

[ 1.260221] e1000e: Copyright© 1999 - 2014 Intel Corporation.

[ 1.266354] xhci-brcm: xHCI BRCM driver

[ 1.285017] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

[ 1.290807] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1

[ 1.298875] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090

[ 1.307782] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000

[ 1.314420] hub 1-0:1.0: USB hub found

[ 1.318207] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)

[ 1.325473] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

[ 1.331232] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2

[ 1.339134] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[ 1.347589] hub 2-0:1.0: USB hub found

[ 1.351368] hub 2-0:1.0: 2 ports detected

[ 1.355766] ehci-brcm: EHCI BRCM driver

[ 1.359729] ehci-brcm f0470300.ehci_v2: EHCI Host Controller

[ 1.365518] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3

[ 1.383486] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300

[ 1.395525] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00

[ 1.402105] hub 3-0:1.0: USB hub found

[ 1.405885] hub 3-0:1.0: 1 port detected

[ 1.410053] ehci-brcm f0470500.ehci_v2: EHCI Host Controller

[ 1.415818] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4

[ 1.433762] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500

[ 1.445523] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00

[ 1.452078] hub 4-0:1.0: USB hub found

[ 1.455921] hub 4-0:1.0: 1 port detected

[ 1.460146] ohci-brcm: OHCI BRCM driver

[ 1.464079] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller

[ 1.469843] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5

[ 1.477758] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400

[ 1.524531] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)

[ 1.536614] ata2.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30001, max UDMA/133

[ 1.538950] hub 5-0:1.0: USB hub found

[ 1.538968] hub 5-0:1.0: 1 port detected

[ 1.539226] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller

[ 1.539330] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6

[ 1.539399] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600

[ 1.570798] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)

[ 1.583417] ata2.00: configured for UDMA/133

[ 1.587915] scsi 1:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0001 PQ: 0 ANSI: 5

[ 1.594003] hub 6-0:1.0: USB hub found

[ 1.594038] hub 6-0:1.0: 1 port detected

[ 1.594375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.594388] ehci-pci: EHCI PCI platform driver

[ 1.594441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.594455] ohci-pci: OHCI PCI platform driver

[ 1.594613] usbcore: registered new interface driver usb-storage

[ 1.594825] mousedev: PS/2 mouse device common for all mice

[ 1.595313] i2c /dev entries driver

[ 1.595995] IR NEC protocol handler initialized

[ 1.596000] IR RC5(x/sz) protocol handler initialized

[ 1.596004] IR RC6 protocol handler initialized

[ 1.596009] IR JVC protocol handler initialized

[ 1.596014] IR Sony protocol handler initialized

[ 1.596019] IR SANYO protocol handler initialized

[ 1.596024] IR Sharp protocol handler initialized

[ 1.596030] IR MCE Keyboard/mouse protocol handler initialized

[ 1.596035] IR XMP protocol handler initialized

[ 1.596609] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver

[ 1.597198] brcmstb-cpufreq f03e257c.cpu-clk-div: registered

[ 1.597397] sdhci: Secure Digital Host Controller Interface driver

[ 1.597398] sdhci: Copyright© Pierre Ossman

[ 1.597401] sdhci-pltfm: SDHCI platform and OF driver helper

[ 1.598741] sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found

[ 1.598743] sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found

[ 1.629522] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA

[ 1.631715] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found

[ 1.631718] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found

[ 1.657644] usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm

[ 1.661522] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA

[ 1.661690] hidraw: raw HID events driver © Jiri Kosina

[ 1.661915] usbcore: registered new interface driver usbhid

[ 1.661917] usbhid: USB HID core driver

[ 1.664702] Initializing XFRM netlink socket

[ 1.683541] NET: Registered protocol family 10

[ 1.691171] NET: Registered protocol family 17

[ 1.691191] NET: Registered protocol family 15

[ 1.691339] Key type dns_resolver registered

[ 1.691433] Registering SWP/SWPB emulation handler

[ 1.698689] ALSA device list:

[ 1.698691] No soundcards found.

[ 1.701691] hub 2-2:1.0: USB hub found

[ 1.701984] hub 2-2:1.0: 4 ports detected

[ 1.759143] mmc1: MAN_BKOPS_EN bit is not set

[ 1.764026] usb 4-1: new high-speed USB device number 2 using ehci-brcm

[ 1.765543] mmc1: new high speed MMC card at address 0001

[ 1.765835] mmcblk0: mmc1:0001 004GE0 3.69 GiB

[ 1.765902] mmcblk0boot0: mmc1:0001 004GE0 partition 1 2.00 MiB

[ 1.765966] mmcblk0boot1: mmc1:0001 004GE0 partition 2 2.00 MiB

[ 1.768537] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10

[ 1.853141] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

[ 1.860657] sd 1:0:0:0: [sda] 4096-byte physical blocks

[ 1.865968] sd 1:0:0:0: Attached scsi generic sg0 type 0

[ 1.866104] sd 1:0:0:0: [sda] Write Protect is off

[ 1.866109] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.866155] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.882326] hub 4-1:1.0: USB hub found

[ 1.882730] hub 4-1:1.0: 4 ports detected

[ 2.187622] sda: sda1

[ 2.190598] sd 1:0:0:0: [sda] Attached SCSI disk

[ 2.195973] EXT3-fs (mmcblk0p5): error: couldn't mount because of unsupported optional features (240)

[ 2.205486] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!

[ 2.492385] EXT4-fs (mmcblk0p5): recovery complete

[ 2.498118] EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=journal

[ 2.507040] VFS: Mounted root (ext4 filesystem) on device 179:5.

[ 2.513347] devtmpfs: mounted

[ 2.516485] Freeing unused kernel memory: 320K (c08b2000 - c0902000)

[ 2.801992] udevd[809]: starting version 3.2.8

[ 2.814628] random: udevd urandom read with 25 bits of entropy available

[ 2.837485] udevd[810]: starting eudev-3.2.8

[ 3.902941] EXT4-fs (sda1): recovery complete

[ 3.957396] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[ 4.021743] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)

[ 4.465545] usb 4-1.2: new high-speed USB device number 3 using ehci-brcm

[ 4.583577] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[ 4.590534] scsi host2: usb-storage 4-1.2:1.0

[ 4.657674] nexus: module license 'Proprietary' taints kernel.

[ 4.663543] Disabling lock debugging due to kernel taint

[ 4.687036] nexus driver initialized

[ 4.767296] nexus.ko: virtual irq: enabled (273)

[ 4.772038] nexus.ko: shared gpio banks: enabled

[ 5.049641] random: nonblocking pool is initialized

[ 5.597483] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[ 5.607194] scsi 2:0:0:0: Attached scsi generic sg1 type 5

[ 5.633189] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 5.641885] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 5.648134] sr 2:0:0:0: Attached scsi CD-ROM sr0

[ 6.775343] version: 20200723104807-u171

[ 7.188814] LCD: R61509V

[ 7.512058] input: gigablue remote control as /devices/virtual/input/input0

[ 7.522314] DVB: registering new adapter (_gigablue_)

[ 7.601433] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.609782] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.618667] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.627447] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.636249] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.645084] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.653823] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.662554] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 9.555552] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1

[ 9.574520] bcmgenet f0b00000.ethernet: configuring instance for internal PHY

[ 9.581745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 11.579097] bcmgenet f0b00000.ethernet eth0: Link is Down

[ 13.207190] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[ 13.215545] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 24.401482] BTHID bthid_init: ++

[ 24.402142] BTHID bthid_init: --

[ 24.412268] usbcore: registered new interface driver btusb

[12581.998494] usb 5-1: new full-speed USB device number 2 using ohci-brcm

[12582.181525] usb 5-1: device descriptor read/all, error -62

[12584.319498] usb 5-1: new full-speed USB device number 4 using ohci-brcm

[12584.510726] usb-storage 5-1:1.0: USB Mass Storage device detected

[12584.517937] scsi host3: usb-storage 5-1:1.0

[12585.530600] scsi 3:0:0:0: Direct-Access Garmin Vivo Smart HR GP 1.00 PQ: 0 ANSI: 5

[12585.550641] sd 3:0:0:0: Attached scsi generic sg2 type 0

[12585.564573] sd 3:0:0:0: [sdb] 10976 512-byte logical blocks: (5.62 MB/5.36 MiB)

[12585.576557] sd 3:0:0:0: [sdb] Write Protect is off

[12585.581370] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00

[12585.585556] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[12585.665581] sdb:

[12585.704565] sd 3:0:0:0: [sdb] Attached SCSI removable disk

[12587.493554] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[18231.880569] usb 4-1.2: USB disconnect, device number 3

[18237.015476] usb 4-1.2: new high-speed USB device number 4 using ehci-brcm

[18237.133665] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18237.142237] scsi host4: usb-storage 4-1.2:1.0

[18238.161891] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18238.270603] sr 4:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18238.280617] sr 4:0:0:0: Attached scsi CD-ROM sr0

[18238.280952] sr 4:0:0:0: Attached scsi generic sg1 type 5

[18249.178695] usb 4-1.2: USB disconnect, device number 4

[18254.658475] usb 4-1.2: new high-speed USB device number 5 using ehci-brcm

[18254.777248] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18254.783988] scsi host5: usb-storage 4-1.2:1.0

[18255.811003] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18255.919716] sr 5:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18255.929584] sr 5:0:0:0: Attached scsi CD-ROM sr0

[18255.930093] sr 5:0:0:0: Attached scsi generic sg1 type 5

[18265.011432] usb 4-1.2: USB disconnect, device number 5

[18265.019097] scsi 5:0:0:0: rejecting I/O to offline device

[18265.024522] scsi 5:0:0:0: killing request

[18269.881473] usb 4-1.2: new high-speed USB device number 6 using ehci-brcm

[18269.989192] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18269.996279] scsi host6: usb-storage 4-1.2:1.0

[18271.018186] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18271.126761] sr 6:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18271.136736] sr 6:0:0:0: Attached scsi CD-ROM sr0

[18271.136968] sr 6:0:0:0: Attached scsi generic sg1 type 5

[18282.361235] usb 4-1.2: USB disconnect, device number 6

[18287.819474] usb 4-1.2: new high-speed USB device number 7 using ehci-brcm

[18287.937722] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18287.944268] scsi host7: usb-storage 4-1.2:1.0

[18288.955680] scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18289.064272] sr 7:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18289.074878] sr 7:0:0:0: Attached scsi CD-ROM sr0

[18289.076574] sr 7:0:0:0: Attached scsi generic sg1 type 5

[18300.294364] usb 4-1.2: USB disconnect, device number 7

[18300.302018] scsi 7:0:0:0: rejecting I/O to offline device

[18300.307443] scsi 7:0:0:0: killing request

[18305.742480] usb 4-1.2: new high-speed USB device number 8 using ehci-brcm

[18305.860804] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18305.867513] scsi host8: usb-storage 4-1.2:1.0

[18306.878808] scsi 8:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18306.987395] sr 8:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18306.998551] sr 8:0:0:0: Attached scsi CD-ROM sr0

[18307.000225] sr 8:0:0:0: Attached scsi generic sg1 type 5

[18316.941733] usb 4-1.2: USB disconnect, device number 8

[18322.096482] usb 4-1.2: new high-speed USB device number 9 using ehci-brcm

[18322.204289] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18322.211167] scsi host9: usb-storage 4-1.2:1.0

[18323.222858] scsi 9:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18323.335244] sr 9:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18323.348928] sr 9:0:0:0: Attached scsi CD-ROM sr0

[18323.351475] sr 9:0:0:0: Attached scsi generic sg1 type 5

[18334.514167] usb 4-1.2: USB disconnect, device number 9

[18339.870473] usb 4-1.2: new high-speed USB device number 10 using ehci-brcm

[18339.989806] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18339.996930] scsi host10: usb-storage 4-1.2:1.0

[18341.014760] scsi 10:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18341.123298] sr 10:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18341.133792] sr 10:0:0:0: Attached scsi CD-ROM sr0

[18341.135426] sr 10:0:0:0: Attached scsi generic sg1 type 5

[18352.284521] usb 4-1.2: USB disconnect, device number 10

[18357.629474] usb 4-1.2: new high-speed USB device number 11 using ehci-brcm

[18357.739180] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18357.746168] scsi host11: usb-storage 4-1.2:1.0

[18358.765729] scsi 11:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18358.874365] sr 11:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18358.884592] sr 11:0:0:0: Attached scsi CD-ROM sr0

[18358.886283] sr 11:0:0:0: Attached scsi generic sg1 type 5

[18369.778651] usb 4-1.2: USB disconnect, device number 11

[18375.176477] usb 4-1.2: new high-speed USB device number 12 using ehci-brcm

[18375.295346] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18375.301969] scsi host12: usb-storage 4-1.2:1.0

[18376.311964] scsi 12:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18376.420554] sr 12:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18376.430805] sr 12:0:0:0: Attached scsi CD-ROM sr0

[18376.432091] sr 12:0:0:0: Attached scsi generic sg1 type 5

[18386.041768] usb 4-1.2: USB disconnect, device number 12

[18391.077473] usb 4-1.2: new high-speed USB device number 13 using ehci-brcm

[18391.185506] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18391.191975] scsi host13: usb-storage 4-1.2:1.0

[18392.214242] scsi 13:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18392.322837] sr 13:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18392.333273] sr 13:0:0:0: Attached scsi CD-ROM sr0

[18392.335699] sr 13:0:0:0: Attached scsi generic sg1 type 5

[18402.719174] usb 4-1.2: USB disconnect, device number 13

[18408.159548] usb 4-1.2: new high-speed USB device number 14 using ehci-brcm

[18408.283925] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18408.291198] scsi host14: usb-storage 4-1.2:1.0

[18409.305539] scsi 14:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18409.414224] sr 14:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18409.424197] sr 14:0:0:0: Attached scsi CD-ROM sr0

[18409.424899] sr 14:0:0:0: Attached scsi generic sg1 type 5

[18421.341470] usb 4-1.2: USB disconnect, device number 14

[18426.678477] usb 4-1.2: new high-speed USB device number 15 using ehci-brcm

[18426.816078] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18426.831779] scsi host15: usb-storage 4-1.2:1.0

[18427.857815] scsi 15:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18427.966405] sr 15:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18427.976684] sr 15:0:0:0: Attached scsi CD-ROM sr0

[18427.977129] sr 15:0:0:0: Attached scsi generic sg1 type 5

[18438.827737] usb 4-1.2: USB disconnect, device number 15

[18444.259472] usb 4-1.2: new high-speed USB device number 16 using ehci-brcm

[18444.378119] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18444.385301] scsi host16: usb-storage 4-1.2:1.0

[18445.395945] scsi 16:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18445.504669] sr 16:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18445.514549] sr 16:0:0:0: Attached scsi CD-ROM sr0

[18445.514924] sr 16:0:0:0: Attached scsi generic sg1 type 5

[18457.692997] usb 4-1.2: USB disconnect, device number 16

[18463.255476] usb 4-1.2: new high-speed USB device number 17 using ehci-brcm

[18463.373986] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18463.380801] scsi host17: usb-storage 4-1.2:1.0

[18464.402398] scsi 17:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18464.510983] sr 17:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18464.521596] sr 17:0:0:0: Attached scsi CD-ROM sr0

[18464.522636] sr 17:0:0:0: Attached scsi generic sg1 type 5

[18475.414328] usb 4-1.2: USB disconnect, device number 17

[18480.894481] usb 4-1.2: new high-speed USB device number 18 using ehci-brcm

[18481.002110] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18481.009643] scsi host18: usb-storage 4-1.2:1.0

[18482.029984] scsi 18:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18482.138685] sr 18:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18482.148726] sr 18:0:0:0: Attached scsi CD-ROM sr0

[18482.149265] sr 18:0:0:0: Attached scsi generic sg1 type 5

[18493.374284] usb 4-1.2: USB disconnect, device number 18

[18498.990474] usb 4-1.2: new high-speed USB device number 19 using ehci-brcm

[18499.108951] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18499.115856] scsi host19: usb-storage 4-1.2:1.0

[18500.136533] scsi 19:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18500.245252] sr 19:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18500.256477] sr 19:0:0:0: Attached scsi CD-ROM sr0

[18500.256906] sr 19:0:0:0: Attached scsi generic sg1 type 5

[18509.799070] usb 4-1.2: USB disconnect, device number 19

[18514.619475] usb 4-1.2: new high-speed USB device number 20 using ehci-brcm

[18514.738564] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18514.745233] scsi host20: usb-storage 4-1.2:1.0

[18515.755898] scsi 20:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18515.864608] sr 20:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18515.874242] sr 20:0:0:0: Attached scsi CD-ROM sr0

[18515.874594] sr 20:0:0:0: Attached scsi generic sg1 type 5

[18527.020837] usb 4-1.2: USB disconnect, device number 20

[18532.478519] usb 4-1.2: new high-speed USB device number 21 using ehci-brcm

[18532.598355] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18532.605225] scsi host21: usb-storage 4-1.2:1.0

[18533.625484] scsi 21:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18533.734173] sr 21:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18533.744625] sr 21:0:0:0: Attached scsi CD-ROM sr0

[18533.746490] sr 21:0:0:0: Attached scsi generic sg1 type 5

[18544.638398] usb 4-1.2: USB disconnect, device number 21

[18550.118468] usb 4-1.2: new high-speed USB device number 22 using ehci-brcm

[18550.236680] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18550.244286] scsi host22: usb-storage 4-1.2:1.0

[18551.254527] scsi 22:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18551.363219] sr 22:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18551.374084] sr 22:0:0:0: Attached scsi CD-ROM sr0

[18551.375111] sr 22:0:0:0: Attached scsi generic sg1 type 5

[18562.266446] usb 4-1.2: USB disconnect, device number 22

[18567.735507] usb 4-1.2: new high-speed USB device number 23 using ehci-brcm

[18567.843162] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18567.849996] scsi host23: usb-storage 4-1.2:1.0

[18568.856607] scsi 23:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18568.965200] sr 23:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18568.977124] sr 23:0:0:0: Attached scsi CD-ROM sr0

[18568.978938] sr 23:0:0:0: Attached scsi generic sg1 type 5

[18579.637044] usb 4-1.2: USB disconnect, device number 23

[18585.201479] usb 4-1.2: new high-speed USB device number 24 using ehci-brcm

[18585.320346] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18585.327156] scsi host24: usb-storage 4-1.2:1.0

[18586.338380] scsi 24:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18586.447085] sr 24:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18586.457697] sr 24:0:0:0: Attached scsi CD-ROM sr0

[18586.459588] sr 24:0:0:0: Attached scsi generic sg1 type 5

[18597.606433] usb 4-1.2: USB disconnect, device number 24

[18602.919479] usb 4-1.2: new high-speed USB device number 25 using ehci-brcm

[18603.038195] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18603.045820] scsi host25: usb-storage 4-1.2:1.0

[18604.064534] scsi 25:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18604.173217] sr 25:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18604.183749] sr 25:0:0:0: Attached scsi CD-ROM sr0

[18604.184830] sr 25:0:0:0: Attached scsi generic sg1 type 5

[18615.080569] usb 4-1.2: USB disconnect, device number 25

[18620.587472] usb 4-1.2: new high-speed USB device number 26 using ehci-brcm

[18620.695078] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18620.701977] scsi host26: usb-storage 4-1.2:1.0

[18621.724267] scsi 26:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18621.832967] sr 26:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18621.842885] sr 26:0:0:0: Attached scsi CD-ROM sr0

[18621.844320] sr 26:0:0:0: Attached scsi generic sg1 type 5

[18632.736316] usb 4-1.2: USB disconnect, device number 26

[18638.300471] usb 4-1.2: new high-speed USB device number 27 using ehci-brcm

[18638.408038] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18638.414973] scsi host27: usb-storage 4-1.2:1.0

[18639.425775] scsi 27:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18639.534358] sr 27:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18639.544866] sr 27:0:0:0: Attached scsi CD-ROM sr0

[18639.545914] sr 27:0:0:0: Attached scsi generic sg1 type 5

[18648.835329] usb 4-1.2: USB disconnect, device number 27

[18653.702477] usb 4-1.2: new high-speed USB device number 28 using ehci-brcm

[18653.809479] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18653.816733] scsi host28: usb-storage 4-1.2:1.0

[18654.839107] scsi 28:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18654.947825] sr 28:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18654.958546] sr 28:0:0:0: Attached scsi CD-ROM sr0

[18654.959668] sr 28:0:0:0: Attached scsi generic sg1 type 5

[18666.456125] usb 4-1.2: USB disconnect, device number 28

[18671.921467] usb 4-1.2: new high-speed USB device number 29 using ehci-brcm

[18672.040489] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18672.047410] scsi host29: usb-storage 4-1.2:1.0

[18673.057824] scsi 29:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18673.166516] sr 29:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18673.176861] sr 29:0:0:0: Attached scsi CD-ROM sr0

[18673.177344] sr 29:0:0:0: Attached scsi generic sg1 type 5

[18682.290234] usb 4-1.2: USB disconnect, device number 29

[18687.088475] usb 4-1.2: new high-speed USB device number 30 using ehci-brcm

[18687.207098] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18687.217836] scsi host30: usb-storage 4-1.2:1.0

[18688.238880] scsi 30:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18688.347581] sr 30:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18688.357601] sr 30:0:0:0: Attached scsi CD-ROM sr0

[18688.357914] sr 30:0:0:0: Attached scsi generic sg1 type 5

[18698.705301] usb 4-1.2: USB disconnect, device number 30

[18704.007474] usb 4-1.2: new high-speed USB device number 31 using ehci-brcm

[18704.125682] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18704.132606] scsi host31: usb-storage 4-1.2:1.0

[18705.153646] scsi 31:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18705.262356] sr 31:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18705.273039] sr 31:0:0:0: Attached scsi CD-ROM sr0

[18705.274725] sr 31:0:0:0: Attached scsi generic sg1 type 5

[18716.426574] usb 4-1.2: USB disconnect, device number 31

[18721.802473] usb 4-1.2: new high-speed USB device number 32 using ehci-brcm

[18721.921935] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18721.928818] scsi host32: usb-storage 4-1.2:1.0

[18722.938483] scsi 32:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18723.047173] sr 32:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18723.058964] sr 32:0:0:0: Attached scsi CD-ROM sr0

[18723.060945] sr 32:0:0:0: Attached scsi generic sg1 type 5

[18733.699397] usb 4-1.2: USB disconnect, device number 32

[18739.232601] usb 4-1.2: new high-speed USB device number 33 using ehci-brcm

[18739.350519] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18739.357204] scsi host33: usb-storage 4-1.2:1.0

[18740.378443] scsi 33:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18740.487144] sr 33:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18740.497504] sr 33:0:0:0: Attached scsi CD-ROM sr0

[18740.498816] sr 33:0:0:0: Attached scsi generic sg1 type 5

[18751.394489] usb 4-1.2: USB disconnect, device number 33

[18756.901478] usb 4-1.2: new high-speed USB device number 34 using ehci-brcm

[18757.020072] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18757.027152] scsi host34: usb-storage 4-1.2:1.0

[18758.037591] scsi 34:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18758.146311] sr 34:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18758.157089] sr 34:0:0:0: Attached scsi CD-ROM sr0

[18758.158197] sr 34:0:0:0: Attached scsi generic sg1 type 5

[18769.308522] usb 4-1.2: USB disconnect, device number 34

[18774.791488] usb 4-1.2: new high-speed USB device number 35 using ehci-brcm

[18774.911741] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18774.918769] scsi host35: usb-storage 4-1.2:1.0

[18775.937660] scsi 35:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18776.046520] sr 35:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18776.057194] sr 35:0:0:0: Attached scsi CD-ROM sr0

[18776.058922] sr 35:0:0:0: Attached scsi generic sg1 type 5

[18786.953588] usb 4-1.2: USB disconnect, device number 35

[18792.412470] usb 4-1.2: new high-speed USB device number 36 using ehci-brcm

[18792.520378] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18792.527263] scsi host36: usb-storage 4-1.2:1.0

[18793.540055] scsi 36:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18793.647427] sr 36:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18793.658230] sr 36:0:0:0: Attached scsi CD-ROM sr0

[18793.659535] sr 36:0:0:0: Attached scsi generic sg1 type 5

[18804.830149] usb 4-1.2: USB disconnect, device number 36

[18810.168472] usb 4-1.2: new high-speed USB device number 37 using ehci-brcm

[18810.276552] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18810.283055] scsi host37: usb-storage 4-1.2:1.0

[18811.292736] scsi 37:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18811.401322] sr 37:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18811.411980] sr 37:0:0:0: Attached scsi CD-ROM sr0

[18811.413063] sr 37:0:0:0: Attached scsi generic sg1 type 5

[18822.579170] usb 4-1.2: USB disconnect, device number 37

[18828.048489] usb 4-1.2: new high-speed USB device number 38 using ehci-brcm

[18828.167265] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18828.174171] scsi host38: usb-storage 4-1.2:1.0

[18829.185891] scsi 38:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18829.293325] sr 38:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18829.303503] sr 38:0:0:0: Attached scsi CD-ROM sr0

[18829.303794] sr 38:0:0:0: Attached scsi generic sg1 type 5

[18840.196553] usb 4-1.2: USB disconnect, device number 38

[18845.659483] usb 4-1.2: new high-speed USB device number 39 using ehci-brcm

[18845.778726] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18845.785745] scsi host39: usb-storage 4-1.2:1.0

[18846.793619] scsi 39:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18846.902325] sr 39:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18846.913017] sr 39:0:0:0: Attached scsi CD-ROM sr0

[18846.914531] sr 39:0:0:0: Attached scsi generic sg1 type 5

[18858.059550] usb 4-1.2: USB disconnect, device number 39

[18863.426475] usb 4-1.2: new high-speed USB device number 40 using ehci-brcm

[18863.545220] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18863.553020] scsi host40: usb-storage 4-1.2:1.0

[18864.563409] scsi 40:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18864.672075] sr 40:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18864.682482] sr 40:0:0:0: Attached scsi CD-ROM sr0

[18864.683514] sr 40:0:0:0: Attached scsi generic sg1 type 5

[18875.576286] usb 4-1.2: USB disconnect, device number 40

[18881.103477] usb 4-1.2: new high-speed USB device number 41 using ehci-brcm

[18881.210637] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18881.217300] scsi host41: usb-storage 4-1.2:1.0

[18882.239890] scsi 41:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18882.348597] sr 41:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18882.358170] sr 41:0:0:0: Attached scsi CD-ROM sr0

[18882.358478] sr 41:0:0:0: Attached scsi generic sg1 type 5

[18892.484999] usb 4-1.2: USB disconnect, device number 41

[18897.779502] usb 4-1.2: new high-speed USB device number 42 using ehci-brcm

[18897.898376] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18897.906039] scsi host42: usb-storage 4-1.2:1.0

[18898.925825] scsi 42:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18899.034537] sr 42:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18899.044401] sr 42:0:0:0: Attached scsi CD-ROM sr0

[18899.044899] sr 42:0:0:0: Attached scsi generic sg1 type 5

[18909.912755] usb 4-1.2: USB disconnect, device number 42

[18915.408499] usb 4-1.2: new high-speed USB device number 43 using ehci-brcm

[18915.527258] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18915.533898] scsi host43: usb-storage 4-1.2:1.0

[18916.559428] scsi 43:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18916.668007] sr 43:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18916.678606] sr 43:0:0:0: Attached scsi CD-ROM sr0

[18916.679605] sr 43:0:0:0: Attached scsi generic sg1 type 5

[18929.088980] usb 4-1.2: USB disconnect, device number 43

[18934.678468] usb 4-1.2: new high-speed USB device number 44 using ehci-brcm

[18934.788389] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18934.795216] scsi host44: usb-storage 4-1.2:1.0

[18935.817052] scsi 44:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18935.923389] sr 44:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18935.934537] sr 44:0:0:0: Attached scsi CD-ROM sr0

[18935.935686] sr 44:0:0:0: Attached scsi generic sg1 type 5

[18945.294607] usb 4-1.2: USB disconnect, device number 44

[18950.126476] usb 4-1.2: new high-speed USB device number 45 using ehci-brcm

[18950.251755] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18950.260860] scsi host45: usb-storage 4-1.2:1.0

[18951.273014] scsi 45:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18951.381725] sr 45:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18951.392284] sr 45:0:0:0: Attached scsi CD-ROM sr0

[18951.393304] sr 45:0:0:0: Attached scsi generic sg1 type 5

[18962.673319] usb 4-1.2: USB disconnect, device number 45

[18968.179476] usb 4-1.2: new high-speed USB device number 46 using ehci-brcm

[18968.286973] usb-storage 4-1.2:1.0: USB Mass Storage device detected

[18968.293755] scsi host46: usb-storage 4-1.2:1.0

[18969.316085] scsi 46:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[18969.424799] sr 46:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[18969.434310] sr 46:0:0:0: Attached scsi CD-ROM sr0

[18969.436537] sr 46:0:0:0: Attached scsi generic sg1 type 5

[18980.454133] usb 4-1.2: USB disconnect, device number 46

root@gbquad4k:~#

Gruß CSM

Edited by csm, 12 February 2021 - 16:23.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #9 Jork

Senior Member
822 posts

+13

Neutral

Posted 12 February 2021 - 17:01

Sehr viel versuche:
[18300.294364] usb 4-1.2: USB disconnect, device number 7
[18300.302018] scsi 7:0:0:0: rejecting I/O to offline device
[18300.307443] scsi 7:0:0:0: killing request

?? leider ich bin überfordert, viel erfolg beim fehlersuche.

Edited by Jork, 12 February 2021 - 17:02.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #10 betacentauri

PLi® Core member
7,185 posts

+323

Excellent

Posted 12 February 2021 - 18:26

Vielleicht bekommt das Laufwerk nicht genügend Strom von der Box.

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #11 Jork

Senior Member
822 posts

+13

Neutral

Posted 12 February 2021 - 19:53

https://en.wikipedia.../wiki/USB#Power

Mein LG = 5V, 1,8 A also usb-hub mit stromversorgung ist kein luxus.
Das könnte klar bei csm der grund sein wobei er beim hochfahren abbricht.
Auch der usb kabel könnte wichtig sein und nicht zulang.

Edited by Jork, 12 February 2021 - 19:59.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #12 Jork

Senior Member
822 posts

+13

Neutral

Posted 13 February 2021 - 12:12

GigaBlue UHD Quad 4k USB anschluss DVD

Attached Files

Rear.jpg 308.37KB 0 downloads

Edited by Jork, 13 February 2021 - 12:12.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #13 csm

Senior Member
96 posts

+2

Neutral

Posted 13 February 2021 - 20:13

@All

Ich danke Euch erstmal für die Ratschläge

Habe mein USB Hub mit Netzteil herrausgesucht und angeschlossen.

Leider spielt er die DVD trotzdem nicht ab.

Irgend etwas ist dort immer noch nicht i.O.

Er liest die DVD ( wesentlich schneller wie vorher, sowie nur einmal ) und hört auf

hier der dmesg output Befehl

openpli 8.0-release gbquad4k

gbquad4k login: root

root@gbquad4k:~# dmesg output

[ 0.000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 9.2.0 (GCC) ) #1 SMP Fri Dec 25 19:54:24 UTC 2020

[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[ 0.000000] Machine model: gbquad4k

[ 0.000000] moving dtb from 0x0000000007624000 to 0x000000000098b788

[ 0.000000] bmem: Reserved 529 MiB at 0x000000001eb00000

[ 0.000000] bmem: Reserved 608 MiB at 0x000000009a000000

[ 0.000000] cma: Reserved 16 MiB at 0x0000000098c00000

[ 0.000000] Forcing write-allocate cache policy for SMP

[ 0.000000] Memory policy: Data cache writealloc

[ 0.000000] On node 0 totalpages: 524288

[ 0.000000] DMA zone: 964 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 123392 pages, LIFO batch:31

[ 0.000000] HighMem zone: 400896 pages, LIFO batch:31

[ 0.000000] PERCPU: Embedded 12 pages/cpu @dd1ab000 s16844 r8192 d24116 u49152

[ 0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523324

[ 0.000000] Kernel command line: root=/dev/mmcblk0p5 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m

[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.000000] Memory: 889544K/2097152K available (6683K kernel code, 325K rwdata, 2184K rodata, 320K init, 213K bss, 1191224K reserved, 16384K cma-reserved, 422904K highmem)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

[ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xde300000 ( 483 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .text : 0xc0008000 - 0xc08b11f0 (8869 kB)

[ 0.000000] .init : 0xc08b2000 - 0xc0902000 ( 320 kB)

[ 0.000000] .data : 0xc0902000 - 0xc0953738 ( 326 kB)

[ 0.000000] .bss : 0xc0956000 - 0xc098b788 ( 214 kB)

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2

[ 0.000000] NR_IRQS:16 nr_irqs:16 16

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde802000, parent irq: 93)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde808000, parent irq: 64)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80aa00, parent irq: 65)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80c640, parent irq: 95)

[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80e200, parent irq: 58)

[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)

[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xde810380, parent IRQ(s): 3)

[ 0.000000] MCP: Enabling write pairing

[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).

[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns

[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns

[ 0.000011] Switching to timer-based delay loop, resolution 37ns

[ 0.000345] Console: colour dummy device 80x30

[ 0.000363] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)

[ 0.000371] pid_max: default: 32768 minimum: 301

[ 0.000461] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.000465] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.000887] CPU: Testing write buffer coherency: ok

[ 0.001096] CPU0: update cpu_capacity 1024

[ 0.001102] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[ 0.001312] Setting up static identity map for 0x8480 - 0x84d8

[ 0.003889] CPU1: update cpu_capacity 1024

[ 0.003894] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[ 0.003948] Brought up 2 CPUs

[ 0.003959] SMP: Total of 2 processors activated (108.00 BogoMIPS).

[ 0.003963] CPU: All CPU(s) started in SVC mode.

[ 0.004317] devtmpfs: initialized

[ 0.013387] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0

[ 0.013612] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[ 0.014857] NET: Registered protocol family 16

[ 0.015517] DMA: preallocated 256 KiB pool for atomic coherent allocations

[ 0.020269] cpuidle: using governor ladder

[ 0.029271] cpuidle: using governor menu

[ 0.036457] No ATAGs?

[ 0.036486] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[ 0.036493] hw-breakpoint: maximum watchpoint size is 8 bytes.

[ 0.036701] Broadcom Brahma-B15 readahead cache at: 0xde954478

[ 0.051731] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)

[ 0.051919] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)

[ 0.052347] SCSI subsystem initialized

[ 0.052835] libata version 3.00 loaded.

[ 0.053065] usbcore: registered new interface driver usbfs

[ 0.053113] usbcore: registered new interface driver hub

[ 0.053158] usbcore: registered new device driver usb

[ 0.053235] Linux video capture interface: v2.00

[ 0.053315] pps_core: LinuxPPS API ver. 1 registered

[ 0.053320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 0.053340] PTP clock support registered

[ 0.053806] Advanced Linux Sound Architecture Driver Initialized.

[ 0.055274] Switched to clocksource arch_sys_counter

[ 0.055494] FS-Cache: Loaded

[ 0.060900] thermal thermal_zone0: failed to read out thermal zone (-22)

[ 0.061002] NET: Registered protocol family 2

[ 0.061489] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.061513] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.061553] TCP: Hash tables configured (established 4096 bind 4096)

[ 0.061632] UDP hash table entries: 256 (order: 1, 8192 bytes)

[ 0.061646] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[ 0.061787] NET: Registered protocol family 1

[ 0.061974] RPC: Registered named UNIX socket transport module.

[ 0.061979] RPC: Registered udp transport module.

[ 0.061983] RPC: Registered tcp transport module.

[ 0.061986] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.061999] PCI: CLS 0 bytes, default 64

[ 0.062322] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]

[ 0.062355] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available

[ 0.063165] futex hash table entries: 512 (order: 3, 32768 bytes)

[ 0.064151] NFS: Registering the id_resolver key type

[ 0.064176] Key type id_resolver registered

[ 0.064180] Key type id_legacy registered

[ 0.064192] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.064198] Installing knfsd (copyright © 1996 okir@monad.swb.de).

[ 0.064550] FS-Cache: Netfs 'cifs' registered for caching

[ 0.064602] Key type cifs.spnego registered

[ 0.064726] fuse init (API version 7.23)

[ 0.065637] bounce: pool size: 64 pages

[ 0.065672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 0.065683] io scheduler noop registered

[ 0.065691] io scheduler deadline registered

[ 0.065704] io scheduler cfq registered (default)

[ 0.065935] brcm-gisb-arb f0400000.gisb-arb: registered mem: de97c000, irqs: 261, 262

[ 0.066688] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)

[ 0.067062] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT

[ 0.167246] brcm-pci f0460000.pcie: link down

[ 0.167302] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT

[ 0.267469] brcm-pci f0490000.pcie: link down

[ 0.268824] brcmstb_memc f1102000.memc-ddr: registered

[ 0.268865] brcmstb_memc f1182000.memc-ddr: registered

[ 0.269049] brcm-waketimer f0417580.waketimer: registered, with irq 263

[ 0.269279] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[ 0.270364] console [ttyS0] disabled

[ 0.270393] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A

[ 1.007103] console [ttyS0] enabled

[ 1.010969] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A

[ 1.020288] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A

[ 1.032616] loop: module loaded

[ 1.036645] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM

[ 1.044060] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3

[ 1.050104] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled

[ 1.068287] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

[ 1.077271] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part

[ 1.086765] scsi host0: brcm-ahci

[ 1.090336] scsi host1: brcm-ahci

[ 1.093812] ata1: FORCE: PHY spd limit set to 3.0Gbps

[ 1.098878] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91

[ 1.106808] ata2: FORCE: PHY spd limit set to 3.0Gbps

[ 1.111868] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91

[ 1.119805] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered

[ 1.126859] brcmstb_qspi f03e3400.spi: using bspi-mspi mode

[ 1.132504] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found

[ 1.138540] brcmstb_qspi: probe of f03e3400.spi failed with error -22

[ 1.145018] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode

[ 1.151162] m25p80 spi32766.0: found n25q032, expected m25p80

[ 1.156938] m25p80 spi32766.0: n25q032 (4096 Kbytes)

[ 1.161951] 5 ofpart partitions found on MTD device spi32766.0

[ 1.167806] Creating 5 MTD partitions on "spi32766.0":

[ 1.172969] 0x000000000000-0x000000100000 : "flash0.bolt"

[ 1.178922] 0x000000100000-0x000000110000 : "flash0.macadr"

[ 1.184956] 0x000000110000-0x000000120000 : "flash0.nvram"

[ 1.190913] 0x000000120000-0x000000130000 : "flash0.devtree"

[ 1.197018] 0x000000000000-0x000000400000 : "flash0"

[ 1.203059] libphy: Fixed MDIO Bus: probed

[ 1.207617] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001

[ 1.213518] bcmgenet f0b00000.ethernet: failed to get enet-mux clock

[ 1.232284] ata1: SATA link down (SStatus 0 SControl 320)

[ 1.233280] libphy: bcmgenet MII bus: probed

[ 1.254123] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k

[ 1.259977] e1000e: Copyright© 1999 - 2014 Intel Corporation.

[ 1.266114] xhci-brcm: xHCI BRCM driver

[ 1.284771] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

[ 1.290556] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1

[ 1.298628] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090

[ 1.307537] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000

[ 1.314175] hub 1-0:1.0: USB hub found

[ 1.317960] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)

[ 1.325228] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

[ 1.330993] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2

[ 1.338886] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[ 1.347347] hub 2-0:1.0: USB hub found

[ 1.351124] hub 2-0:1.0: 2 ports detected

[ 1.355573] ehci-brcm: EHCI BRCM driver

[ 1.359543] ehci-brcm f0470300.ehci_v2: EHCI Host Controller

[ 1.365332] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3

[ 1.383310] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300

[ 1.395278] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00

[ 1.401862] hub 3-0:1.0: USB hub found

[ 1.405639] hub 3-0:1.0: 1 port detected

[ 1.409798] ehci-brcm f0470500.ehci_v2: EHCI Host Controller

[ 1.415572] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4

[ 1.433518] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500

[ 1.445277] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00

[ 1.451856] hub 4-0:1.0: USB hub found

[ 1.455705] hub 4-0:1.0: 1 port detected

[ 1.459932] ohci-brcm: OHCI BRCM driver

[ 1.463875] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller

[ 1.469645] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5

[ 1.477557] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400

[ 1.524283] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)

[ 1.536368] ata2.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30001, max UDMA/133

[ 1.538697] hub 5-0:1.0: USB hub found

[ 1.538716] hub 5-0:1.0: 1 port detected

[ 1.538972] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller

[ 1.539077] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6

[ 1.539151] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600

[ 1.570584] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)

[ 1.583216] ata2.00: configured for UDMA/133

[ 1.587701] scsi 1:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0001 PQ: 0 ANSI: 5

[ 1.593756] hub 6-0:1.0: USB hub found

[ 1.593794] hub 6-0:1.0: 1 port detected

[ 1.594126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.594141] ehci-pci: EHCI PCI platform driver

[ 1.594197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.594205] ohci-pci: OHCI PCI platform driver

[ 1.594372] usbcore: registered new interface driver usb-storage

[ 1.594585] mousedev: PS/2 mouse device common for all mice

[ 1.595070] i2c /dev entries driver

[ 1.595742] IR NEC protocol handler initialized

[ 1.595747] IR RC5(x/sz) protocol handler initialized

[ 1.595752] IR RC6 protocol handler initialized

[ 1.595757] IR JVC protocol handler initialized

[ 1.595761] IR Sony protocol handler initialized

[ 1.595765] IR SANYO protocol handler initialized

[ 1.595770] IR Sharp protocol handler initialized

[ 1.595775] IR MCE Keyboard/mouse protocol handler initialized

[ 1.595780] IR XMP protocol handler initialized

[ 1.596345] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver

[ 1.596947] brcmstb-cpufreq f03e257c.cpu-clk-div: registered

[ 1.597143] sdhci: Secure Digital Host Controller Interface driver

[ 1.597145] sdhci: Copyright© Pierre Ossman

[ 1.597148] sdhci-pltfm: SDHCI platform and OF driver helper

[ 1.598498] sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found

[ 1.598500] sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found

[ 1.629276] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA

[ 1.631466] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found

[ 1.631469] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found

[ 1.658938] usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm

[ 1.661275] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA

[ 1.661441] hidraw: raw HID events driver © Jiri Kosina

[ 1.661668] usbcore: registered new interface driver usbhid

[ 1.661669] usbhid: USB HID core driver

[ 1.662412] Initializing XFRM netlink socket

[ 1.670304] NET: Registered protocol family 10

[ 1.675069] NET: Registered protocol family 17

[ 1.675089] NET: Registered protocol family 15

[ 1.675236] Key type dns_resolver registered

[ 1.675346] Registering SWP/SWPB emulation handler

[ 1.681405] ALSA device list:

[ 1.681407] No soundcards found.

[ 1.721249] hub 2-2:1.0: USB hub found

[ 1.727252] hub 2-2:1.0: 4 ports detected

[ 1.761274] usb 4-1: new high-speed USB device number 2 using ehci-brcm

[ 1.845373] sd 1:0:0:0: Attached scsi generic sg0 type 0

[ 1.845457] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

[ 1.845461] sd 1:0:0:0: [sda] 4096-byte physical blocks

[ 1.845573] sd 1:0:0:0: [sda] Write Protect is off

[ 1.845578] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.845624] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.879129] mmc1: MAN_BKOPS_EN bit is not set

[ 1.890022] mmc1: new high speed MMC card at address 0001

[ 1.895687] mmcblk0: mmc1:0001 004GE0 3.69 GiB

[ 1.900347] mmcblk0boot0: mmc1:0001 004GE0 partition 1 2.00 MiB

[ 1.906375] mmcblk0boot1: mmc1:0001 004GE0 partition 2 2.00 MiB

[ 1.913953] hub 4-1:1.0: USB hub found

[ 1.918112] hub 4-1:1.0: 4 ports detected

[ 1.919121] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10

[ 2.160837] sda: sda1

[ 2.163786] sd 1:0:0:0: [sda] Attached SCSI disk

[ 2.169156] EXT3-fs (mmcblk0p5): error: couldn't mount because of unsupported optional features (240)

[ 2.178636] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!

[ 2.200467] EXT4-fs (mmcblk0p5): recovery complete

[ 2.206181] EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=journal

[ 2.215095] VFS: Mounted root (ext4 filesystem) on device 179:5.

[ 2.222146] devtmpfs: mounted

[ 2.225286] Freeing unused kernel memory: 320K (c08b2000 - c0902000)

[ 2.239442] usb 4-1.2: new high-speed USB device number 3 using ehci-brcm

[ 2.357600] hub 4-1.2:1.0: USB hub found

[ 2.361865] hub 4-1.2:1.0: 4 ports detected

[ 2.497980] udevd[812]: starting version 3.2.8

[ 2.516947] random: udevd urandom read with 20 bits of entropy available

[ 2.539833] udevd[813]: starting eudev-3.2.8

[ 2.632318] usb 4-1.2.1: new high-speed USB device number 4 using ehci-brcm

[ 2.730494] usb-storage 4-1.2.1:1.0: USB Mass Storage device detected

[ 2.759587] scsi host2: usb-storage 4-1.2.1:1.0

[ 2.842494] usb 4-1.2.4: new high-speed USB device number 5 using ehci-brcm

[ 2.942735] hub 4-1.2.4:1.0: USB hub found

[ 2.948577] hub 4-1.2.4:1.0: 4 ports detected

[ 3.465313] EXT4-fs (sda1): recovery complete

[ 3.469697] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[ 3.530951] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)

[ 3.767360] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TU00 PQ: 0 ANSI: 0

[ 3.778358] scsi 2:0:0:0: Attached scsi generic sg1 type 5

[ 3.797768] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray

[ 3.806430] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 3.812661] sr 2:0:0:0: Attached scsi CD-ROM sr0

[ 4.246135] nexus: module license 'Proprietary' taints kernel.

[ 4.252005] Disabling lock debugging due to kernel taint

[ 4.275934] nexus driver initialized

[ 4.356577] nexus.ko: virtual irq: enabled (273)

[ 4.361323] nexus.ko: shared gpio banks: enabled

[ 4.537302] random: nonblocking pool is initialized

[ 6.361560] version: 20200723104807-u171

[ 6.776581] LCD: R61509V

[ 7.100132] input: gigablue remote control as /devices/virtual/input/input0

[ 7.108732] DVB: registering new adapter (_gigablue_)

[ 7.186310] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.195648] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.204917] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.214021] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.223046] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.231948] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.241020] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 7.249874] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM(45208 FBC))...

[ 9.123726] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1

[ 9.136934] bcmgenet f0b00000.ethernet: configuring instance for internal PHY

[ 9.144231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 11.139876] bcmgenet f0b00000.ethernet eth0: Link is Down

[ 12.204627] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[ 12.213589] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 23.062164] BTHID bthid_init: ++

[ 23.062695] BTHID bthid_init: --

[ 23.071838] usbcore: registered new interface driver btusb

root@gbquad4k:~#

und hier der lsusb Befehl

root@gbquad4k:~# lsusb

Bus 002 Device 002: ID 05e3:0620

Bus 004 Device 002: ID 05e3:0610

Bus 001 Device 001: ID 1d6b:0002

Bus 002 Device 001: ID 1d6b:0003

Bus 003 Device 001: ID 1d6b:0002

Bus 004 Device 001: ID 1d6b:0002

Bus 005 Device 001: ID 1d6b:0001

Bus 006 Device 001: ID 1d6b:0001

Bus 004 Device 003: ID 05e3:0608

Bus 004 Device 004: ID 13fd:0842

Bus 004 Device 005: ID 05e3:0608

root@gbquad4k:~#

Vielleicht kommen wir jetzt dem Problem auf die Spur

Gruß CSM

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #14 Dorfkind

Senior Member
218 posts

+7

Neutral

Posted 14 February 2021 - 07:46

Ist das immer die gleiche DVD? Nimm mal ne andere.

Mutant HD51 OpenPli 9.0 Wohnzimmer

Edision Osmini OpenPli 9.0 Schlafzimmer

Bier lecker 20.0 Kühlschrank

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #15 Jork

Senior Member
822 posts

+13

Neutral

Posted 14 February 2021 - 23:47

Auch das extension plugin "dvdburn" braucht man nicht unbedingt sondern es hat ein paar nebensachen dabei.
Es hat bei mir die eigenschaft besser DVD's zu lesen.
Ich brauche da die brenn funktion nicht unbedingt.

Edited by Jork, 14 February 2021 - 23:48.

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #16 csm

Senior Member
96 posts

+2

Neutral

Posted 27 March 2021 - 15:32

@ All

Ich Habe es mit 2 aktiven verschiedene USB Hubs probiert.

Die aber leider das DVD Laufwerk nicht zum laufen bekommen haben.

Habe mir dann ein USB 2.0 Y-Kabel - 2 x A Stecker an 5-pol Mini B Stecker zugelegt

und was soll ich sagen jetzt funktiert das entlich.

Ist nur zur Information

Gruß CSM

Back to [DE] Benutzerunterstützung

4 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users

ATTENTION !!!

OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player

#1 csm

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #2 Jork

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #3 littlesat

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #4 Jork

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #5 csm

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #6 Jork

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #7 Jork

Attached Files

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #8 csm

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #9 Jork

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #10 betacentauri

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #11 Jork

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #12 Jork

Attached Files

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #13 csm

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #14 Dorfkind

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #15 Jork

Re: OpenPli 8.0 Gigablue UHD Quad 4k und DVD-Player #16 csm

4 user(s) are reading this topic