Jump to content


Photo

Maxytec image on Ax branded Multibox Twin

Started by Rudi007, 25 Mar 2021 06:36

  • Please log in to reply
5 replies to this topic

#1 Rudi007

  • New Member
  • 3 posts

0
Neutral

Posted 25 March 2021 - 06:36

Hi.

 

I tried to flash the Maxytec Multibox Twin image on the Ax branded Multibox Twin box but I got the error "invalid image".

Any ideas what I can do about it?

 

Afaik the Ax / Anadol and Maxytec recievers got the same hardware and just have a different branding on the case.

 

The recovery image also seems to change nothing - everything seems to work while flashing (thumb drive is blinking, takes some time, boots back to multiboot) but the boot logo didn't change.

 

For now I'm running openATV recovery + image 6.4.

 

Thanks in advance


Re: Maxytec image on Ax branded Multibox Twin #2 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 25 March 2021 - 07:27

Hi,

Same hardware but they can change a single id to distinguish between both model and perform a check on it on the driver level, preventing what you try to do to work, as seems to mention the error report that you get.

Pr2

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: Maxytec image on Ax branded Multibox Twin #3 Rudi007

  • New Member
  • 3 posts

0
Neutral

Posted 25 March 2021 - 14:15

Is there anything I can do about it?


Re: Maxytec image on Ax branded Multibox Twin #4 twol

  • Senior Member
  • 448 posts

+15
Neutral

Posted 25 March 2021 - 16:04

if you know how to patch firmware possibly - I know someone that does that to run sf8008 on a beyonwiz box - but takes a fair bit of technical knowledge.


Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 

Re: Maxytec image on Ax branded Multibox Twin #5 Rudi007

  • New Member
  • 3 posts

0
Neutral

Posted 25 March 2021 - 17:16

Well then the atv image might not work anymore.

 

I was thinking of some kind of force it or"flash it anyway" thing. But I guess it's not worth it.

 

Thank you guys anyway :)

 

Have a nice day


Re: Maxytec image on Ax branded Multibox Twin #6 Aliraza63

  • PLi® Tester
  • 250 posts

+23
Neutral

Posted 30 March 2021 - 04:37

If u will force update u may brick the box .it will over write the boot loader and box will be damaged.

Every machine has its own boot identical boot loaders. in first phase it verifies the hardware and in 2nd phase it starts the firmware . the one and only safe way is to try neoboot. it has the option to install any other machine's  firmware ( which should have same hardwares) .

More information  u can find it at author's forum/page . just for helping purpose I share the pic 

Attached File  vuScreen.jpg   101.08KB   9 downloads


 DM-900 ,DM-520, Vu+Duo2

Back to [EN] Enduser support

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support