Jump to content


Photo

VU+ Uno 4Kse LCD

Started by Guest-*0823016*, 28 Apr 2021 09:22

  • Please log in to reply
71 replies to this topic

Re: VU+ Uno 4Kse LCD #21 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,487 posts

+397
Excellent

Posted 3 May 2021 - 10:06

I think that most users of any box with a display, whether it is a Vu+ Uno 4Kse or a GB or Axas model actually care how their LCD display looks. In many cases the box is hidden in a cupboard or to small for really properly seeing the content if a picon is shown too. That might be the reason that people don’t respond. They obviously don’t care. In addition to this I know that LCD4linux isn’t working 100% on a Uno 4Kse. Sometimes it causes a delay when zapping. This is possible to solve with one change in the setup. You might put some effort in this plugin. Change this specific value to 400 like I did. You can find this setting under http://ipaddres_of_y.../config/?Mode=1 under global.
 

I can move this to the skin section where the real skinners are present. Perhaps that they are willing to solve your issue.

Attached Files


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: VU+ Uno 4Kse LCD #22 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 3 May 2021 - 10:53

I think that most users of any box with a display, whether it is a Vu+ Uno 4Kse or a GB or Axas model actually care how their LCD display looks. In many cases the box is hidden in a cupboard or to small for really properly seeing the content if a picon is shown too. That might be the reason that people don’t respond. They obviously don’t care. In addition to this I know that LCD4linux isn’t working 100% on a Uno 4Kse. Sometimes it causes a delay when zapping. This is possible to solve with one change in the setup. You might put some effort in this plugin. Change this specific value to 400 like I did. You can find this setting under http://ipaddres_of_y.../config/?Mode=1 under global.
 

I can move this to the skin section where the real skinners are present. Perhaps that they are willing to solve your issue.

I understand the right situation because you deal with so many decoders.
Mine wanted to help with the specific decoder nothing else.
LCD4linux does not work well for me so I proceeded to model it by hand and I like it.
 
 
If you want to move it, go ahead.

Re: VU+ Uno 4Kse LCD #23 WanWizard

  • PLi® Core member
  • 70,223 posts

+1,798
Excellent

Posted 3 May 2021 - 13:25

I have been writing for many days and no one has ever replied, so I have no one has this decoder or it doesn't matter.

 

It is more likely that

  • people have other things to do, or
  • don't care about a display (I don'!, I can't even see it from where I sit!), or
  • simply have no idea (I don't know anything about skins), so it is pointless to respond
     

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: VU+ Uno 4Kse LCD #24 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 3 May 2021 - 13:28

 

I have been writing for many days and no one has ever replied, so I have no one has this decoder or it doesn't matter.

 

It is more likely that

  • people have other things to do, or
  • don't care about a display (I don'!, I can't even see it from where I sit!), or
  • simply have no idea (I don't know anything about skins), so it is pointless to respond
     

 

For me it was a pastime.
Ok.

Re: VU+ Uno 4Kse LCD #25 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 3 May 2021 - 17:09

I'd like to have LCD display on the STBs and that's why I am using VU+ Solo 4K and Vu+ Duo 4K for my daily usage.

To be really honest without you, I prefer the default LCD skin which already give me all the informations that I want and I'd like the current proportion.

So I could not find any benefits with your modified LCD skin.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: VU+ Uno 4Kse LCD #26 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 3 May 2021 - 20:10

I'd like to have LCD display on the STBs and that's why I am using VU+ Solo 4K and Vu+ Duo 4K for my daily usage.
To be really honest without you, I prefer the default LCD skin which already give me all the informations that I want and I'd like the current proportion.
So I could not find any benefits with your modified LCD skin.

Obviously the default skin gives you more satisfaction, in fact the xml file is "calibrated" for larger LCD than my modest one 4Kse!
If you read well it is dedicated to the One precisely because the proportions were not correct and I adapted them for my decoder.

Re: VU+ Uno 4Kse LCD #27 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 3 May 2021 - 22:15

However when I have some time I will only improve it and I mean only for owners of 1 4Kse, and not for those who write only to write !!!

Re: VU+ Uno 4Kse LCD #28 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 4 May 2021 - 18:50

I was thinking that your LCD was of the same resolution as the one in the Solo4K or Duo 4k.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: VU+ Uno 4Kse LCD #29 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 4 May 2021 - 20:02

I was thinking that your LCD was of the same resolution as the one in the Solo4K or Duo 4k.

Maybe it means that the dimensions are not the same.

Re: VU+ Uno 4Kse LCD #30 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 7 May 2021 - 10:34

Does anybody knows how to retrieve the front LCD resolution? So i can show it for the Solo 4K and the Duo 4K. 

 

Edit: self answer:

 

root@vusolo4k:/proc/stb/lcd# cat /proc/stb/lcd/xres  
1E0
root@vusolo4k:/proc/stb/lcd# cat /proc/stb/lcd/yres
140
 

 

1E0=740

140=320

 

So:  740x320 for Solo 4K


Edited by Pr2, 7 May 2021 - 10:45.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: VU+ Uno 4Kse LCD #31 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 7 May 2021 - 10:46

Duo 4K same resolution:

 

root@vuduo4k:/proc/stb/lcd# cat xres  
1E0
root@vuduo4k:/proc/stb/lcd# cat yres  
140
 

1E0=740

140=320

 

So:  740x320 for Duo 4K


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: VU+ Uno 4Kse LCD #32 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 7 May 2021 - 10:47

Can you please display the same for the Uno 4K se?


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: VU+ Uno 4Kse LCD #33 Abu Baniaz

  • PLi® Contributor
  • 2,494 posts

+64
Good

Posted 7 May 2021 - 17:16

GB UE 4K

 
root@gbue4k:~# cat /proc/stb/lcd/xres
dc
 
root@gbue4k:~# cat /proc/stb/lcd/yres
b0
 
dc = 220
b0 = 176

Re: VU+ Uno 4Kse LCD #34 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 7 May 2021 - 21:35

Tell me how to proceed, I'm away on business.

Il mio telefono!

Re: VU+ Uno 4Kse LCD #35 Pr2

  • PLi® Contributor
  • 6,165 posts

+261
Excellent

Posted 8 May 2021 - 07:23

Connect to your box in telnet (or ssh if you have enable it).

 

Then type the 2 following lines:

 

cat /proc/stb/lcd/xres
cat /proc/stb/lcd/yres

 

Then copy & paste the result here.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 

Re: VU+ Uno 4Kse LCD #36 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 8 May 2021 - 13:08

Just got back from off-site work.

The previous question was misinterpreted or I did not explain myself well. Anyway I knew how to do it but I didn't know the command. Here is the result:

cat /proc/stb/lcd/xres=190

cat /proc/stb/lcd/yres=F0


Edited by krime, 8 May 2021 - 13:09.

Re: VU+ Uno 4Kse LCD #37 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 8 May 2021 - 13:11

GB UE 4K

 
root@gbue4k:~# cat /proc/stb/lcd/xres
dc
 
root@gbue4k:~# cat /proc/stb/lcd/yres
b0
 
dc = 220
b0 = 176
 

What does it have to do with 3d?


Edited by krime, 8 May 2021 - 13:12.

Re: VU+ Uno 4Kse LCD #38 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 8 May 2021 - 18:38

In the original skin_display.xml file, look where the clock is placed!
Impossible to see.
 
<widget source="global.CurrentTime" render="Label" position="320,250" size="130,52" halign="right" font="FdLcD;42" foregroundColor="lightcyan" >
<convert type="ClockToText">Default</convert>
</widget>

 

 

Basically in another display!


Re: VU+ Uno 4Kse LCD #39 WanWizard

  • PLi® Core member
  • 70,223 posts

+1,798
Excellent

Posted 8 May 2021 - 20:01

This has been an ongoing disccussion ever since IanSav changed the code.

 

It would be better for everyone if someone posts the correct version for every box here, so we can update the build, and make an end to these discussions...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: VU+ Uno 4Kse LCD #40 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 8 May 2021 - 20:20



It would be better for everyone if someone posts the correct version for every box here, so we can update the build, and make an end to these discussions...


You could create a 3d with all LCDs.

Il mio telefono!
Back to Skins

14 user(s) are reading this topic

0 members, 14 guests, 0 anonymous users

  1. Forums
  2. → PLi® Development
  3. → Skins