Jump to content


Photo

[CutListEditor] Crash when called again

Started by Qu@rk, 23 Aug 2021 10:32

  • Please log in to reply
39 replies to this topic

#1 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 10:32

I have already reported this problem in another thread.

Today it happened again.

 

I defined an IN and OUT cut for a recording. MovieCut worked perfectly.

I called CutListEditor again with the original recording and E2 crashed.

 

The crashlog and cuts file (as ZIP) as attachments. Please let me know if there is anything you need to investigate.

 

VU+ DUO4K, OpenPLi 8.0

 

 

Attached Files


Re: [CutListEditor] Crash when called again #2 jort38

  • Senior Member
  • 652 posts

+8
Neutral

Posted 23 August 2021 - 10:49

If I do this from a slave on the master, that happens with my Vu+ Ultimo too. You are on the same machine as the recording?

Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),

Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),

Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.

Xtrend ET10000 (works via ethernet & OpenPli 9) and

Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)

Re: [CutListEditor] Crash when called again #3 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 10:52

Yes, same machine. It does not happen with every recording. Only some recordings seem to be a problem.


Re: [CutListEditor] Crash when called again #4 jort38

  • Senior Member
  • 652 posts

+8
Neutral

Posted 23 August 2021 - 11:12

Sorry, no clue (and no ZDF HD)


Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),

Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),

Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.

Xtrend ET10000 (works via ethernet & OpenPli 9) and

Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)

Re: [CutListEditor] Crash when called again #5 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 August 2021 - 12:28 

../../git/lib/dvb/filepush.cpp:70 ASSERTION !(current_span_remaining % m_blocksize) FAILED

I'll pass it on to Erik.

 

In the meantime, upgrade to 8.1-release.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: [CutListEditor] Crash when called again #6 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 13:50

Thanks.

 

Please, could you have look at the other problem, "OUT" cuts not deletable? Thanks.


Re: [CutListEditor] Crash when called again #7 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 August 2021 - 14:05

I'm not a developer, so someone else has to pick that up.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: [CutListEditor] Crash when called again #8 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 14:19

Oh, then it will never be fixed. I have reported this a long time ago.

 

Upgrade to 8.1 not advisable at the moment. Servers are down to restore plugins etc.


Edited by Qu@rk, 23 August 2021 - 14:21.

Re: [CutListEditor] Crash when called again #9 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 August 2021 - 14:26

Who's servers? Nothing is down on our side.

 

If you mean the message when you select Software update: for an upgrade to 8.1, you need to flash.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: [CutListEditor] Crash when called again #10 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 14:30

I flashed the upgrade with backup and restore and lost all plugins etc. I saw the message during restore that the plugins and packages are not available at the moment. So I ended up with a total empty installation without plugins etc. And in the menu, no plugins are available. I thought with a minor update from 8.0 to 8.1 an upgrade would not be necessary.

 

I did this before, an upgrade from 7.3 to 8.0 and all settings and plugins had been restored.


Edited by Qu@rk, 23 August 2021 - 14:35.

Re: [CutListEditor] Crash when called again #11 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 August 2021 - 14:40

The reason behind this has been explained several times. In short, it is due to a hardware failure in our storage server.

 

You should be able to run the autoinstall manually : menu - setup - auto backup - menu - run autoinstall. It should show you any errors.

 

p.s. I've checked the logs of the download servers for your ip. I see the image download and the refresh of the package index files, but no attempt to download any plugin.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: [CutListEditor] Crash when called again #12 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 14:49

I created an auto install backup, flashed the image and restored the auto install backup.

No success. Neither plugins were restored nor do I have any access to the plugins (no plugins available).


Re: [CutListEditor] Crash when called again #13 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 August 2021 - 14:56

You didn't make a backup after the flash, did you? Because that would create a new and now empty autoinstall list.

 

If not, check the backup directory with something like ftp or windows explorer. It has a file called "autoinstall". Does it contain a list of packages? What is the timestamp of that file?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: [CutListEditor] Crash when called again #14 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 14:59

The error occurs during the restore of the plugins and packages etc. I am not able to make a screenshot at this point of installation.

 

Auto Install restore obviously restores the settings only and not the installed plugins.


Re: [CutListEditor] Crash when called again #15 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 15:02

I have tried this with WLAN active. I will try this again with a LAN connection.

Maybe at the moment of restore the WLAN connection is still not available.


Re: [CutListEditor] Crash when called again #16 ccs

  • Senior Member
  • 229 posts

+7
Neutral

Posted 23 August 2021 - 15:14

I wouldn't expect the wlan to be working during the restore, only after the box has rebooted.


test

Re: [CutListEditor] Crash when called again #17 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 23 August 2021 - 15:17

Now it worked with LAN but not with WLAN.

Before I was not able to restore any plugins after reboot over WLAN, only the settings had been restored from Auto Install.


Re: [CutListEditor] Crash when called again #18 WanWizard

  • PLi® Core member
  • 70,546 posts

+1,813
Excellent

Posted 23 August 2021 - 15:18

Most likely what @ccs wrote: the update failed before the restored WLAN settings could make a connection.

 

We'll have to see if we can make that more reliable.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: [CutListEditor] Crash when called again #19 ims

  • PLi® Core member
  • 13,790 posts

+214
Excellent

Posted 23 August 2021 - 15:48

all 'not deletable' cuts have not effect ... ignore it


Kdo nic nedělá, nic nezkazí!

Re: [CutListEditor] Crash when called again #20 Qu@rk

  • Senior Member
  • 192 posts

+2
Neutral

Posted 25 October 2021 - 08:33 

../../git/lib/dvb/filepush.cpp:70 ASSERTION !(current_span_remaining % m_blocksize) FAILED

I'll pass it on to Erik.

 

In the meantime, upgrade to 8.1-release.

 

 

The crash problem with CutListEditor still exists, OpenPli 8.1.


Back to [EN] Enduser support

4 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support