39 replies to this topic

[dolphs]

Frenske, bedankt voor de reactie... Gaat om DVB-C van de firma DiGi.ro te Boekarest ... 

In mijn reactie van 7 oktober staan de instellingen genoteerd, behalve dat nu de " hdlist=false"en "keepnumbering=false" staan

 

Op grote lijnen loopt het dus dus ook wel gewoon, zie de cablescan output van de enigma2 debug log vorige keer gepost :

e.e.a. ziet er gezond uit en er worden dus ook zenders gevonden en toegevoegd, alleen wordt er niets toegevoegds aan de aangemaakte map ": DIGI " , die blijft hartstikke leeg. 

[Screen] Showing screen 'CableScanStatus'.
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=16
[eConsoleAppContainer] Starting /usr/bin/grab
[eCableScan] NITReady 0
[eDVBFrontendParametersCable] Cable freq 354000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 362000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 370000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 386000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 314000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 322000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 474000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 394000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 402000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 426000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 346000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 434000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 442000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 306000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 338000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 330000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 458000, mod 3, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 450000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 482000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 490000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 498000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 506000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 514000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 522000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 530000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 538000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 546000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 562000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 554000, mod 5, sr 6900000, fec 0
[eDVBFrontendParametersCable] Cable freq 378000, mod 3, sr 6900000, fec 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 354000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 362000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 370000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 386000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 314000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 322000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eConsoleAppContainer] Starting /usr/bin/grab
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 474000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 394000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 402000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 426000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 346000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 434000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 442000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 306000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 338000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 330000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eEPGChannelData] schedule other finished(1658837782)
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 458000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eEPGChannelData] schedule finished(1658837783)
[eEPGChannelData] stop caching events(1658837783)
[eEPGChannelData] next update in 60 min
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 450000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 482000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 490000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 498000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 506000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 514000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 522000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 530000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 538000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eConsoleAppContainer] Starting /usr/bin/grab
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 546000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 562000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 554000 khz, sr 6900000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eDVBFrontend2] tune
[eDVBFrontend2] tuning to 378000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend2] startTuneTimeout 5000
[eDVBFrontend2] setFrontend 1
[eDVBFrontend2] setting frontend
[eDVBFrontend2] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend2] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eCableScan] state 6
[eDVBDB] Renumbering...
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 30 channels and 239 services!

[dolphs]

Tja sorry voor de vervuiling , het was iets te vroeg geloof ik,

ik kan vorige post niet meer weghalen, maar deze verse debug logs wou ik aan dit topic plakken ( grom ):

[eCableScan] SDTReady 0
[eCableScan] state 6
[eDVBDB] Renumbering...
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 30 channels and 238 services!
[AutoCableScan] completed result =  -1
[Screen] Showing screen 'StandbySummary'.
[Screen] Showing screen 'Standby'.
[AutoCableScan] Scan was not successful retry in one hour

je ziet dat het loopt, alleen worden de zenders dus niet toegevoegd aan de vers gegenereerde " userbouquet.DIGI.tv "

 

root@h7:/etc/enigma2# cat userbouquet.DIGI.tv
#NAME DIGI

-rw-r--r--    1 root     root             6 Feb  6 05:02 resumepoints.pkl
-rw-r--r--    1 root     root             0 Feb  6 05:02 blacklist
-rw-r--r--    1 root     root          1972 Feb  6 05:02 settings
-rw-r--r--    1 root     root          1879 Feb  6 05:02 profile
-rw-r--r--    1 root     root           109 Feb  6 05:05 bouquets.tv
-rw-r--r--    1 root     root            12 Feb  6 05:06 userbouquet.DIGI.tv
-rw-r--r--    1 root     root         16393 Feb  6 05:06 lamedb5
-rw-r--r--    1 root     root         14675 Feb  6 05:06 lamedb

 

Voor de duidelijkheid, de box was ten tijde van de autocablescan maagdelijk : lees geen userbouquets , etc

 

 

 

Edited by dolphs, 6 February 2023 - 04:16.

[dolphs]

en dan om het uur als volgt: maar dus niks onder "DIGI"

< snip snip>

[eCableScan] SDTReady 0
[eDVBFrontend1] tune
[eDVBFrontend1] tuning to 378000 khz, sr 6900000, fec 0, modulation 3, inversion 2
[eDVBChannel] OURSTATE: tuning
[eCableScan] state 1
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] state 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eCableScan] state 6
[eDVBDB] Renumbering...
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 30 channels and 238 services!
[AutoCableScan] completed result =  -1
[Screen] Showing screen 'StandbySummary'.
[Screen] Showing screen 'Standby'.
[AutoCableScan] Scan was not successful retry in one hour
[eDVBFrontend1] close frontend
[eDVBFrontend1] sendTone allowed only in feSatellite (1)
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

Attached Files

•  digi.jpg   37.57KB   1 downloads

Edited by dolphs, 6 February 2023 - 07:26.

[Dimitrij]

dolphs

Please attach /etc/enigma2/lamedb5 /etc/enigma2/lamedb  as zip.

[Dimitrij]

Problem this

eDebug("[eCableScan] NITReady %d", error);
eDebug("[eCableScan] SDTReady %d", error);

 

[eCableScan] SDTReady 0
.......

[eCableScan] NITReady 0

Answer always 0(zero) --> so stop CableScan.

[Dimitrij]

Need enigma.debuglog in standard auto scan

[dolphs]

@Dimitrij - thanks for your reply, find below the files requested - hopefully it will bring us some joy sooner or later ;-)  - thanks again!

 

 

reset box to virgin state

[] see screenshot /etc/enigma2 as well current settings, enigma2.jpg, attached

 

- nothing scanned yet

 

- restart enigma2 in debug mode

 

- clean lamedb file created

- clean lamedb5 file created

[] lamedb_before_cablescan.tar.gz

 

- started cablescan

- "scan failed!" 

- updated lamedb file

- updated lamedb5 file

[] lamedb_after_cablescan.tar.gz

 

 

- auto scan

- scan OK!

[] enigma.20230208.debuglog.tar.gz

Attached Files

•  enigma2.jpg   129.62KB   1 downloads
•  lamedb_before_cablescan.tar.gz   547bytes   4 downloads
•  lamedb_after_cablescan.tar.gz   6.04KB   5 downloads
•  enigma.20230208.debuglog.tar.gz   16.93KB   3 downloads

[Dimitrij]

dolphs

 

By the way, openATV uses a different cablescan code.

No one can check this except you.

There are two options to check:

'Network ID(0 - all networks)' --> 0

'Network ID(0 - all networks)' --> digitv network

[dolphs]

Ilfov regio ( incl Bucuresti ) , zie ook : ID Digi cable pe județe - Page 3 - Forumul Softpedi

 

Zelfde restultaat: , dus "scan failed", maar dus wel kanalen gevonden op "network id"  ( config.plugins.CableScan.networkid ):

 

00000 OK ( all netgworks )

00010 OK ( Ilfov/ Bucuresti )

Edited by dolphs, 9 February 2023 - 17:01.

[Dimitrij]

 

00000 OK ( all netgworks )

00010 OK ( Ilfov/ Bucuresti )

 

I'm sorry, I did not understand?

 

openATV image cablescan work?

[dolphs]

Beide netwerk ids geven zelfde resultaat: dus 00000 of 00010, cablescan scant maar alsnog failed zoals ook in debug log attached van gisteren is terug te zien ( similar results using networkid 00000 or 00010 ) met OpenPLi 

Ik zou openATV erop moeten flashen en kijken of dat wel werkt met genoemde ids [ need to flash openatv on this h7c box to see if it works with ids mentioned ], maar niet nu ( not now )

[Dimitrij]

 

Ik zou openATV erop moeten flashen en kijken of dat wel werkt met genoemde ids [ need to flash openatv on this h7c box to see if it works with ids mentioned ], maar niet nu ( not now )

Wait

[Dimitrij]

For test use config.plugins.CableScan.networkid 00001

[dolphs]

mtmsc but naye, does not scan anything (OpenPLi), need debug logs?

So far just 000000 and 000010 as is indicated at the softpedia link, Bucuresti/Ilfov is my region (  000010 )

[ nee scant niets (OpenPLi), alleen 00000 en 00010 als eerder aangegeven in de softpedia link, BU/Ilfov is mijn regio ( 000010 ) ] 

[Dimitrij]

 

need debug logs?

no

[mimisiku]

Allemaal leuk en aardig, maar als DigiTV zich aan de standaard had gehouden was al dit gezever niet nodig! De KabelScan functioneert bij iedere provider uitstekend behalve bij DigiTV. Zou daar een balletje opgooien.

[luisteraar]

Allemaal leuk en aardig, maar als DigiTV zich aan de standaard had gehouden was al dit gezever niet nodig! De KabelScan functioneert bij iedere provider uitstekend behalve bij DigiTV. Zou daar een balletje opgooien.

De gangbare TV's komen wel klaar met de scan van DigiTV dan moet het toch in openpli gezocht worden.

[Sagitarius †]

Daar een balletje opgooien ? Waarom zouden zij zich aan onze gebruikte standaard moeten houden, ieder land mag dat toch zelf bepalen. Ze gebruiken in Boekarest waarschijnlijk eigen ontvangers als die goed werken waarom zouden ze die standaard dan gaan aanpassen voor 1 e2 gebruiker.

[dolphs]

Allemaal leuk en aardig, maar als DigiTV zich aan de standaard had gehouden was al dit gezever niet nodig! De KabelScan functioneert bij iedere provider uitstekend behalve bij DigiTV. Zou daar een balletje opgooien.

 

@mimisiku - Ik waardeer je bijdrage over het algemeen enorm, echter je zou ook gewoon een keer niet kunnen antwoorden, het is nu even weinig constructief .

Het is nog maar de vraag, of het de firma "RCSRDS" dit is aan te rekenen, want zoals luisteraar ook zegt met CI+ module in TV en op netwek afstemmen werkt wel, vandaar dus deze eigenaardigheid gemeld.

 

Dit draadje loopt al een tijdje en zal verder qua prio laag zijn, ook voor mij. Echter eens in de zoveel tijd schenk ik er weer eens wat aandacht aan, want is en blijft hobby.

Resumee zenders worden wel gewoon netjes ingelezen ( zowel auto networkid: 00000 als 00010, maar komen dus niet in de "DIGI" directory welke wordt aangemaakt - ter verduidelijking twee screenshots

 

gegroet!

Attached Files

•  cablescan1.jpg   176.7KB   2 downloads
•  cablescan2.jpg   79.66KB   2 downloads

[dolphs]

Ter info - helaas na Pli9 op de ET10000 nog steeds hetzelfde resultaat: de twee lamedb files worden gevuld met zendes mbv de cablescan,  maar de "favourites" DIGI blijft leeg ( error ). Dit ter info, workaround heb ik dus zo erg is het allemaal niet...

 

gezond 2024!