120 replies to this topic

[catastrofus]

Is OpenPLi an android based image?

[satvga]

1 mute does not work correctly -when mute is set, switching the channel disables mute but the icon remains. any image

2  the current slot is incorrectly specified

3 mp4 files are played without sound, on other images it's fine

OpenPLi 8.2

[stazeb]

The overscan wizard (“OSDPositionSetup” plugin) does not work correctly. I can not save new positions and I can not see any changed.

[neo]

Are you sure it is not your TV that has overscan enabled and keeps "correcting" the image?

[stazeb]

Maybe I can not find nothing in my Sony KDL-32W656A settings about overscan

Edited by stazeb, 14 February 2023 - 16:01.

[Pr2]

Have a look here if you can match the menu with the one from my Sony TV.

 

https://wiki.openpli.org/Overscan

[stazeb]

Thanks. This work for me �

Edited by stazeb, 20 February 2023 - 01:27.

[Pr2]

Would be kind if you provide a guide on how to disable it with your TV model (if is is different from what is described in the wiki page). This can help others.

[stazeb]

Press on Home button
Home-> Settings -> Display -> Screen -> Display Area = Full Pixels

Edited by stazeb, 26 February 2023 - 09:46.

[stazeb]

When I switch into Recovery Boot Menu I don’t have anymore connection to my network.

(When DUAL starts booting, Display Show "boot", press OK button of RCU repeatedly for about 5-10 second and wait 20-30 seconds to go into Recovery Boot Menu).

[neo]

The recovery menu does DHCP unless you have configured a fixed IP. And it may take a while before you see the green tick.

[stazeb]

How I can configure fixed IP from recovery menu?

[neo]

Don't have a Dual handy here, and I can't remember, but I'd thought I'd seen it in some menu somewhere.

[drspiros]

If I flash the "usb" version of the image (not the multiboot one), the Android partition will be deleted as well?

thanks

[drspiros]

I answer by myself. No, it's not being deleted!

 

There is a bug with Pluto TV plugin. When you open the plugin and go to the settings, the box freezes and you have to power it off.

[rantanplan]

Here we are in test feedback

Please always attach a debug log with errors, otherwise nobody can help.

[drspiros]

Another bug I noticed is that when you want to record a program, the box hangs for 2-5 minutes (cog wheels), then the recording starts. This bug happens also at cobralibero image (based on PLi), but not in images not based on PLi (such as OpenSPA, OpenATV, PurE2).

(I'll try to upload a debug log).

[neo]

Never seen that, on any box.

[Erik Slagter]

It might be the issue we've been having ever since we upgraded to Zeus. With some receivers apparently there is some bad interaction between libc, kernel and drivers which triggers an issue exposed with the changes I made in the recording code (for transcoding). We still need to completely separate the transcoding code from the recording code to completely solve this issue. The problem is that transcoding (or, actually the implementation of some manufacturers) has some requirements that conflict with the "normal" recording operation (= just read the device and dump the contents to a file). If you do the latter with trancoding, it's not going to work for all non-Xtrend-type transcoding receivers.

[stazeb]

I have 3 images is multiboot.
1. OpenPli
2. Egami 10.4
4. OpenBH 5.3
Each time after startup the receiver, image name in slot 2 is changed to OpenATV while e.g. when booting into OpenBH in slot 3 I see the correct image name in slot 2. Egami 10.4
Where can I find the names of images from all slots?
Is it possible to change the image name in slot?