120 replies to this topic

[stazeb]

After the last update of 10.02.2022, the multiboot options menu of the restart menu is gone!

[WanWizard]

Did you flash the box with a USB image?

 

The option is only shown if multiboot partitions exist.

[Frenske]

I will test this in an hour whether I can confirm this behavior.

[Frenske]

If you are referring to this option in the menu I can't confirm that. At least not with today's image.

 

 dual 1.PNG   434.83KB   3 downloads

 

 dual 2.PNG   453.15KB   2 downloads

 

 dual 3 menu.PNG   338.51KB   2 downloads

 

 dual menu 11.2.PNG   435.43KB   2 downloads

[Frenske]

FYI. I flashed all images via the ‘flash image online’ via the menu.

[WanWizard]

Enigma checks if the multiboot partitions exist, and if not, it will not show the option.

[stazeb]

The multiboot partitions exists and I can switch from Android. Two days ago I saw Multiboot Image selectie in reboot menu but not today!

[stazeb]

After update few minutes ago still missing “Multiboot image selection” from Reboot menu!

Attached Files

•  362C9E6B-AE6D-44BA-B04D-8FE28240D91F.jpeg   104.3KB   1 downloads
•  2FE9A924-5E5F-4BB9-BA61-7FD46746A9F3.jpeg   68.79KB   1 downloads
•  71A8CF7C-F912-4DD6-8E4C-8D6B986F3348.jpeg   89.09KB   1 downloads

[stazeb]

I think this behavior happens after the update.
I flashed all the images from root.
These images (also menu 'Multiboot image selection') were available until today update.

[Frenske]

You flashed all images from root? Sorry but with my knowledge I don’t know what you mean by that or did you flash them from the recovery menu?

I flashed them via the openpli menu.

 

The only difference I notice is that you use different images from different builders.

[stazeb]

I have placed image zip file in root of flash than I flashed them from the openpli menu. Image placed in root of flash directory of in root of hdd of usb directory is visible in flash menu of openpli.
For this moment I mis ‘Multiboot image section’ in reboot menu.

[stazeb]

https://wiki.openpli.org/Multiboot

[Frenske]

I personally hardly ever used this. 
Like I mentioned before, I don’t use any other non PLi images.

 

I can’t be of any help. Sorry. I would flash the box again with today’s image and try again to flash other images. 

[WanWizard]

Which image was used to flash the box initially?

 

Older ATV versions use a non-standard multiboot partitioning, which OE-A derived images don't have a problem with (they are backwards compatible) but we don't support that format.

 

I know the Dual comes out of the box with ATV, but I don't know which version.

[stazeb]

2 days ago OpenPli was ok. I can still select slot for image from Android and OpenAtv 7.0 and from OpenSpa.

Please look her for images versions:

Attached Files

•  ED35C46C-44EE-4924-94C3-9DC93CBA084E.jpeg   112.6KB   1 downloads

[WanWizard]

Restart the box in debug mode, wait until it is restarted, then restart again in standard mode.

 

You now have a .debuglog file in /home/root. zip it, and attach it here so we can have a look.

[stazeb]

Attached a .debuglog file

Attached Files

•  enigma.20220211.debuglog.zip   14.07KB   7 downloads

[rantanplan]

[Skin] Error in screen 'ChannelSelection' widget 'widget' [Skin] {CinoGriPLi/skin.xml}: The source 'screen_path' was not found in screen 'ChannelSelection'!  Please contact the skin's author!

[stazeb]

I’m using this skin on my VU DUO 4K in OpenPli all 3 years without any problems.
On my Qviart Dual few releases was OK

Edited by stazeb, 11 February 2022 - 21:13.

[WanWizard]

It checks for the boot partition here:

[Console] command: mount --bind /dev/mmcblk0p1 /tmp/MultibootKt3BYi
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/MultibootKt3BYi
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount --bind /dev/mmcblk0p3 /tmp/MultibootKt3BYi
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/MultibootKt3BYi
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount --bind /dev/mmcblk0p4 /tmp/MultibootKt3BYi
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/MultibootKt3BYi
[eConsoleAppContainer] Starting /bin/sh

But no

[Multiboot] Startupdevice found: ....

So the conclusion is: not a multiboot capable device.

[Multiboot] Bootslots found: {}

Dual multiboot detection was added to Enigma  Qviart 3 months ago, so I can only repeat what I wrote before, your box most likely has a non-standard multiboot system, either the old OE-A system or an SD-Card based system, neither of them work with OpenPLi, this will absolutely be the case if you've never flashed the recovery image (which wipes the entire flash and recreates the partitions).