16 replies to this topic

[kowalmisiek]

Hello. I have a VU + Zero 4k and a DVB-T2 mygica t230 tuner. On the previous version of Openpli 8.0 in the feed I had drivers for the t230. Currently I have Openpli 8.1 Stable installed and there are no t230 drivers. I tried to install it manually, but either the t230 does not appear in the tuners tab or it appears but does not see the channels. Is it possible to fix it somehow?

[Pr2]

Hi,

Have you tried this:

https://forums.openp...ndpost&p=820328

[kowalmisiek]

root@vuzero4k:~# opkg update && opkg install kernel-module-dvb-usb-cxusb
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party-armv7ahf-neon/Packages.gz.
Updated source 'openpli-3rd-party-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party-vuzero4k/Packages.gz.
Updated source 'openpli-3rd-party-vuzero4k'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/Packages.gz.
Updated source 'openpli-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/vuzero4k/Packages.gz.
Updated source 'openpli-vuzero4k'.
No packages installed or removed.
root@vuzero4k:~# kernel-module-si2157
-sh: kernel-module-si2157: command not found
root@vuzero4k:~# kernel-module-si2168
-sh: kernel-module-si2168: command not found
root@vuzero4k:~# kernel-module-si2157
-sh: kernel-module-si2157: command not found
root@vuzero4k:~# kernel-module-si2168
-sh: kernel-module-si2168: command not found

These commands do not work. Today I downloaded the latest OpenPLI 8.1 stable. In the newest OpenPLI downloaded today, I noticed that the drivers in FEED had T230 drivers and installed it. Unfortunately, still nothing scans. Something is missing.

[scriptmelvin †]

Those are not commands, those are loadable kernel modules. You can check which modules are loaded with

lsmod

If they are not loaded, restart the whole box (not just enigma).

[WanWizard]

The opkg package scripts don't do a modprobe, so a reboot is always needed after the installation of kernel modules.

[kowalmisiek]

root@vuzero4k:~# lsmod
Module                  Size  Used by
bluetooth             389554  4
ipv6                  282594  94
brcmfb                  1475  2
dvb_bcm72604         1044967  33 brcmfb
dvb_base             5457378  5 dvb_bcm72604
bcm_event               2907  5 dvb_bcm72604
procmk                  1686  2 bcm_event,dvb_bcm72604
si2157                  5013  1
si2168                  7944  1
dvb_usb_cxusb          43581  2
dib0070                 6995  1 dvb_usb_cxusb
dvb_usb                14543  1 dvb_usb_cxusb

I have reset the box many times with no success. The tuner is visible and configured but is not searching for any channel. Everything works fine on egami.

[WanWizard]

On the previous version of Openpli 8.0 in the feed I had drivers for the t230.

 

Nothing has changed to kernel and drivers between 8.0 and 8.1. So which drivers are you exactly refering too?
 

[rantanplan]

@

kowalmisiek

 

Did you read the info before?
Try again to do exactly what is there in the link.

It's very easy.

copy & paste via telnet
Simply copy everything again and run it.

Edited by rantanplan, 13 October 2021 - 23:45.

[kowalmisiek]

I did this and above I pasted the log of what I did. It didn't help. I can see the tuner but no channels. As for the drivers in FEED, they are now available for download. But about a month ago, there were only around 10 downloadable drivers in FEED, and the T230 was not. Now there are probably 30 drivers visible in FEED.

[scriptmelvin †]

It appears from your log that you only installed the first package (kernel-module-dvb-usb-cxusb). You should install all the packages linked to. So:

opkg update && opkg install kernel-module-dvb-usb-cxusb kernel-module-si2157 kernel-module-si2168 firmware-dvb-demod-si2168-b40 firmware-dvb-tuner-si2158-a20

Edited by scriptmelvin, 14 October 2021 - 11:59.

[kowalmisiek]

 

It appears from your log that you only installed the first package (kernel-module-dvb-usb-cxusb). You should install all the packages linked to. So:

opkg update && opkg install kernel-module-dvb-usb-cxusb kernel-module-si2157 kernel-module-si2168 firmware-dvb-demod-si2168-b40 firmware-dvb-tuner-si2158-a20

I ran the command you typed but nothing came of it

This is the current log

root@vuzero4k:~# lsmod
Module                  Size  Used by
bluetooth             389554  4
ipv6                  282594  80
brcmfb                  1475  2
dvb_bcm72604         1044967  33 brcmfb
dvb_base             5457378  5 dvb_bcm72604
bcm_event               2907  5 dvb_bcm72604
procmk                  1686  2 bcm_event,dvb_bcm72604
si2157                  5013  0
si2168                  7944  0
dvb_usb_cxusb          43581  2
dib0070                 6995  1 dvb_usb_cxusb
dvb_usb                14543  1 dvb_usb_cxusb

 

[scriptmelvin †]

Did you reboot the box?

[kowalmisiek]

Did you reboot the box?

I always do this after all changes.

 

I quickly installed EGAMI on which my MYGICA T230 works flawlessly. I am sending a picture of the Firmware installed there

 

https://ibb.co/4dPJ5QF

[WanWizard]

What is the output of "lsmod" on egami?

[kowalmisiek]

What is the output of "lsmod" on egami?

 

root@vuzero4k:~# lsmod
Module                  Size  Used by
bluetooth             390906  4
brcmfb                  1475  2
dvb_bcm72604         1044967  3 brcmfb
dvb_base             5457378  5 dvb_bcm72604
bcm_event               2907  5 dvb_bcm72604
procmk                  1686  2 bcm_event,dvb_bcm72604
si2157                  5029  1
si2168                  7623  1
bcmeg                   5726  0
xfs                   525508  0
libcrc32c                855  1 xfs
dvb_usb_cxusb          43581  2
dib0070                 6995  1 dvb_usb_cxusb
dvb_usb                14543  1 dvb_usb_cxusb

 

[Pr2]

I have also a T230 but be carefull that the same name hides different chipset. My very old one (1st generation is working) but I think that the latest one is not working.

By googling you can find issue and alternative firmware that you can test.
 
Here is what I have in my personal restore script (some are commented out):
 
 

#
#  MyGica T-230
#
opkg install enigma2-plugin-drivers-ct2-usb-geniatech-t230
opkg install enigma2-plugin-drivers-ct2-usb-dvbsky-t330
# MyGica T-230
# opkg update
# opkg install kernel-module-dvb-usb-cxusb \
# kernel-module-si2157 \
# kernel-module-si2168 \
# firmware-dvb-demod-si2168-b40 \
# firmware-dvb-tuner-si2158-a20

Egami image is preinstalling many things in it so I guess that all the drivers are already loaded.

Pr2

Edited by Pr2, 15 October 2021 - 09:45.

[kowalmisiek]

PLi® Contributor did not help your script. I do not know what to do. I tried to manually replace the firmware with Egami to the lib / firmware directory but to no avail. It still doesn't work.

 

Where are these files located?

si2157                  5013  0
si2168                  7944  0

 

Edited by kowalmisiek, 17 October 2021 - 19:23.