Jump to content


Photo

Vu+ Duo2 freezes/locks up

Started by MachIII, 18 Oct 2021 17:57

  • Please log in to reply
16 replies to this topic

#1 MachIII

  • Senior Member
  • 45 posts

+2
Neutral

Posted 18 October 2021 - 17:57

I've got a Duo2 that randomly freezes/locks up. This can be just watching tv or playback of recorded material, during recording or just sitting standby.

I've found that older Pli image(6.2) is more stable than the newest, but not perfekt, just less freezes. Maybe due to smaller image, memory problem?

I had another Duo2 laying around so I swapped over HDD and tuners to that box, and now it's working perfectly with a backup image.

So it has to be a hardware problem I think. Anyone experienced the same? Would like to fix this box again if it's possible.


Re: Vu+ Duo2 freezes/locks up #2 WanWizard

  • PLi® Core member
  • 70,554 posts

+1,813
Excellent

Posted 18 October 2021 - 18:26

Define "freeze" / "lock up".

 

Does the image freeze? Do you see a spinner? Does the web interface still work? Can you still login with telnet/ssh? Can you still ping the box?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ Duo2 freezes/locks up #3 rantanplan

  • PLi® Contributor
  • 1,860 posts

+87
Good

Posted 18 October 2021 - 19:07

sounds like the still occurring problem for mips.
It seems to have gotten better, but probably not perfect.
glibc probably still.
Thinking ahead, a test from the hardknott branch would be interesting here.
But then again there is no feedback.


Re: Vu+ Duo2 freezes/locks up #4 WanWizard

  • PLi® Core member
  • 70,554 posts

+1,813
Excellent

Posted 18 October 2021 - 19:15

I hope to be able to start building test images for hardnott soon, so it can be tested by a wider audience.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ Duo2 freezes/locks up #5 rantanplan

  • PLi® Contributor
  • 1,860 posts

+87
Good

Posted 18 October 2021 - 19:32

You can start it ;-)

Construction works for most boxes.
Image works too, but of course there is always something to do.


Re: Vu+ Duo2 freezes/locks up #6 WanWizard

  • PLi® Core member
  • 70,554 posts

+1,813
Excellent

Posted 18 October 2021 - 19:42

I will as soon as I've made provisions for it in our buildfarm. Will not be earlier than sometime next week.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ Duo2 freezes/locks up #7 A.A.

  • Senior Member
  • 391 posts

+8
Neutral

Posted 19 October 2021 - 08:55

I don't see any lockup/freeze on vuduo2: the current 8.1 image is rock stable.

IMHO it must be some plugin not behaving.

 

As far as I see there isn't any special mips-related issue but maybe I just never encountered it.

I would much prefer if we could keep the vanilla OE glibc unpatched.

A.A.
 


Re: Vu+ Duo2 freezes/locks up #8 Taykun345

  • Senior Member
  • 1,297 posts

+41
Good

Posted 19 October 2021 - 10:17

I've got a Duo2 that randomly freezes/locks up. This can be just watching tv or playback of recorded material, during recording or just sitting standby.

I've found that older Pli image(6.2) is more stable than the newest, but not perfekt, just less freezes. Maybe due to smaller image, memory problem?

I had another Duo2 laying around so I swapped over HDD and tuners to that box, and now it's working perfectly with a backup image.

So it has to be a hardware problem I think. Anyone experienced the same? Would like to fix this box again if it's possible.

Same problem on my old duo2. Random freezing. HW problem ...


Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: Vu+ Duo2 freezes/locks up #9 rantanplan

  • PLi® Contributor
  • 1,860 posts

+87
Good

Posted 19 October 2021 - 12:42

I don't see any lockup/freeze on vuduo2: the current 8.1 image is rock stable.

IMHO it must be some plugin not behaving.

 

As far as I see there isn't any special mips-related issue but maybe I just never encountered it.

I would much prefer if we could keep the vanilla OE glibc unpatched.

A.A.
 

I am happy about any positive feedback.
regarding glibc
Without glibc patches, no mips would be running.
There are a number of patches just for mips.

The glibc in the 'ZEUS' branch made some mips receivers unusable for a long time.
However, not all receivers were equally affected.
Fewer problems have been reported here since 8.1.
So it is possible that there is a hardware defect here.
 


Re: Vu+ Duo2 freezes/locks up #10 WanWizard

  • PLi® Core member
  • 70,554 posts

+1,813
Excellent

Posted 19 October 2021 - 13:00

Wouldn't be suprised if this was a power supply related issue.

 

If the box has an in-built harddisk, does the situation improve if you disconnect it (from the power)?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ Duo2 freezes/locks up #11 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,495 posts

+397
Excellent

Posted 19 October 2021 - 14:50

I never ever experienced power issues on my embedded powersupply so no external PSU.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: Vu+ Duo2 freezes/locks up #12 MachIII

  • Senior Member
  • 45 posts

+2
Neutral

Posted 19 October 2021 - 17:45

Define "freeze" / "lock up".

 

Does the image freeze? Do you see a spinner? Does the web interface still work? Can you still login with telnet/ssh? Can you still ping the box?

 

Image freeze with picture on the screen, sometime spinner, other times not. No logs. Can not ping the box.


Re: Vu+ Duo2 freezes/locks up #13 MachIII

  • Senior Member
  • 45 posts

+2
Neutral

Posted 19 October 2021 - 17:50

I don't see any lockup/freeze on vuduo2: the current 8.1 image is rock stable.

IMHO it must be some plugin not behaving.

 

As far as I see there isn't any special mips-related issue but maybe I just never encountered it.

I would much prefer if we could keep the vanilla OE glibc unpatched.

A.A.
 

 

No problems with 8.1 on the other box. And this is a complete backup image including all plugins from the freezing box, so nothing wrong with image/plugins I think.


Re: Vu+ Duo2 freezes/locks up #14 MachIII

  • Senior Member
  • 45 posts

+2
Neutral

Posted 19 October 2021 - 17:51

Wouldn't be suprised if this was a power supply related issue.

 

If the box has an in-built harddisk, does the situation improve if you disconnect it (from the power)?

This is the one thing I havn't tried yet, will test over the next days. :)


Re: Vu+ Duo2 freezes/locks up #15 MachIII

  • Senior Member
  • 45 posts

+2
Neutral

Posted 19 October 2021 - 17:53

 

I've got a Duo2 that randomly freezes/locks up. This can be just watching tv or playback of recorded material, during recording or just sitting standby.

I've found that older Pli image(6.2) is more stable than the newest, but not perfekt, just less freezes. Maybe due to smaller image, memory problem?

I had another Duo2 laying around so I swapped over HDD and tuners to that box, and now it's working perfectly with a backup image.

So it has to be a hardware problem I think. Anyone experienced the same? Would like to fix this box again if it's possible.

Same problem on my old duo2. Random freezing. HW problem ...

 

That's what I suspect too. Do you know if it's relatet to mb or psu?


Re: Vu+ Duo2 freezes/locks up #16 Taykun345

  • Senior Member
  • 1,297 posts

+41
Good

Posted 20 October 2021 - 21:07

Dont know. I threw it in ebin because of other problems (dead hdmi and lan port).

Sent from my moto g 5G plus using Tapatalk
Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: Vu+ Duo2 freezes/locks up #17 MachIII

  • Senior Member
  • 45 posts

+2
Neutral

Posted 19 November 2021 - 16:24

Nearly a month now since I swapped over the psu from the faulty box, and no lock ups anymore. 

So the fault is definitely in the motherboard. 


Back to [EN] Enduser support

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support