Jump to content


Photo

Need help flashing a sab triple tuner


  • Please log in to reply
7 replies to this topic

#1 hzr1rn

  • New Member
  • 4 posts

0
Neutral

Posted 7 November 2021 - 11:56

Hello, new member here and very much new to this activity. First up, not sure where to post this, I've no doubt this is not the place, but please bear with me.

Have a sab triple tuner which has worked great for a couple of years, as it's now connected to the internet, I noticed that a software update was available, so went ahead and updated (without first ensuring I had a back up) and of course as you would expect I'm in trouble now, as the 2 sat tuners are unconfigured and I cant seem to fix them through the menu's.

Image is Openpli 4, kernal ver 4.1.24, python ver 2.7.3

(info on the tuners shows)

Detected NIMs

Tuner A M88DS3103 (DVB S2)

Tuner B M88DS3103 (DVB S2)

Tuner C Si216x (DVB-T2) working ok

 

Any support would be very much appreciated :(


Edited by 40H3X, 7 November 2021 - 14:09.
@hzr1rn Please don't hijack other man's post. So I moved your question here, thank you. https://forums.openp...b-triple-tuner/


Re: Need help flashing a sab triple tuner #2 BadBlake

  • Senior Member
  • 98 posts

+1
Neutral

Posted 7 November 2021 - 12:10

I'm kind of a newbie but if it were me I would do a clean install of a newer image, but maybe backup the one you are on now so that you can revert to it at a later time if you want.



Re: Need help flashing a sab triple tuner #3 hzr1rn

  • New Member
  • 4 posts

0
Neutral

Posted 7 November 2021 - 12:54

Thanks, put a new image on a usb, but system wont allow me to access it via the usb port, really struggling now! 



Re: Need help flashing a sab triple tuner #4 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,967 posts

+191
Excellent

Posted 7 November 2021 - 13:23

Try multiple USB sticks, the smaller the better and did you followed this? https://wiki.openpli.org/Receivers:SAB


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Need help flashing a sab triple tuner #5 hzr1rn

  • New Member
  • 4 posts

0
Neutral

Posted 7 November 2021 - 15:34

Thanks, seem to update with smaller USB, at least I can now do a scan on astra 28.2e, but no channels are found, tried auto & manual?



Re: Need help flashing a sab triple tuner #6 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,967 posts

+191
Excellent

Posted 7 November 2021 - 16:11

Maybe give us some more insight of what you do or did and also so us your tuner settings, like pictures you can make screen shots https://wiki.openpli...ke_a_screenshot


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: Need help flashing a sab triple tuner #7 hzr1rn

  • New Member
  • 4 posts

0
Neutral

Posted 7 November 2021 - 16:26

 Apologies to all, after the reboot I removed the sat cables, to try a different LNB feed, in refitting the cables I managed to put a dummy (no feed) cable into the box. So all is well and I'm back on line.

 

Thank you all for the assistance

 

:)  :)  :)



Re: Need help flashing a sab triple tuner #8 WanWizard

  • PLi® Core member
  • 70,894 posts

+1,833
Excellent

Posted 7 November 2021 - 16:30

:thumbs-up:

 

Thanks for the feedback.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users