Yes, but that will write the output to the console. If you want to have it in a file too, use
ENIGMA_DEBUG_LVL=5 enigma2 | tee /home/root/debug.log
Posted 15 November 2021 - 20:23
Yes, but that will write the output to the console. If you want to have it in a file too, use
ENIGMA_DEBUG_LVL=5 enigma2 | tee /home/root/debug.log
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 16 November 2021 - 17:23
Sorry, this is no log with level 5 and you removed and plugged the module several times. This makes it really hard to understand what you did.
Can you please do it again. Please no space before and after the =
init 4 ENIGMA_DEBUG_TIME=1 ENIGMA_DEBUG_LVL=5 enigma2 | tee /home/root/debug.log
Please remove the module and zap to an encrypted channel. Then execute the above statements. When e2 runs, insert the module. Wait until picture is visible. Then zap to an unencrypted channel. As you said the box should only show a black picture. Then stop e2 with ctrl+c and post the log file.
Posted 16 November 2021 - 22:11
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 17 November 2021 - 18:08
Then start e2 with the command. Wait until it has automatically zapped to an unencrypted channnel and then zap back to the encrypted channel. Then insert the module. Wait until picture is visible. Then zap to an unencrypted channel. As you said the box should only show a black picture. Then stop e2 with ctrl+c and post the log file.
Posted 20 November 2021 - 12:40
I cannot reproduce the problem with my quad4k and my CI+ module. But I use builtin SAT tuner and you as far as I understood a cable tuner. So maybe a driver issue.
Nevertheless please try the attached e2 binary.
Please install latest develop image. Then unzip the attached zip file. Put the enigma2 file to /tmp. Then do the following:
init 4 chmod 755 /tmp/enigma2 /tmp/enigma2
And test whether something has changed.
You can stop e2 by pressing ctrl+c. And then with "init 3" you can start e2 again for normal use.
Posted 20 November 2021 - 13:41
Apparently Network.py wants to do something with /etc/resolv.conf and it has no permission to do that.
2 x ultimo4k (dvb-c fbc + 1 dvb-s2, 8.3r/nb) + een et10k/osmini (geen tuners en dus fallbackclient, nb) met een Synology ds214+ (2 x 6 TB) op DSM 7.1.1 in ziggo oost (voormalig @Home) + A1/A2/A3/HB (TechniSat)
Posted 20 November 2021 - 18:42
I cannot reproduce the problem with my quad4k and my CI+ module. But I use builtin SAT tuner and you as far as I understood a cable tuner. So maybe a driver issue.
Nevertheless please try the attached e2 binary.
Please install latest develop image. Then unzip the attached zip file. Put the enigma2 file to /tmp. Then do the following:
init 4 chmod 755 /tmp/enigma2 /tmp/enigma2And test whether something has changed.
You can stop e2 by pressing ctrl+c. And then with "init 3" you can start e2 again for normal use.
to avoid misunderstanding
Tuner I GIGA DVB-T2/C NIM (TT2L10) (Combined DVB-C/T2)
Edited by ricki, 20 November 2021 - 18:44.
Posted 22 November 2021 - 17:04
I also have a T2 tuner (don't know at the moment, whether it's the exact same tuner) in my quad4k. I have a ci+ module for dvb-t2, but no valid subscription. I can try to test, whether I can reproduce without valid subscription. But it needs some days.
Posted 23 November 2021 - 04:56
noticed a strange thing, 4 channels SVT1, SVT2, SVT24 and Kunskapskanalen unencrypted is provider where I get black picture
TV4 is another provider broadcasting unencrypted, but there I do not get black picture when i zap from encrypted.
When i zap from TV4 ( unencrypted ) to SVT ( unencrypted ) i get black picture, zap back to TV4 clear picture
when the module is inside, when the modul is outside no problems to zap between them.
Posted 28 November 2021 - 11:26
I have tested with my quad4k. A TT3L10 tuner is inserted and I have activated my subscription (dvb-t2).
I can watch encrypted channels and zap then back to non encrypted dvb-t2 and also dvb-s channels without issues.
Maybe the provider sends a CAID. Please zap to such a channel and go to menu -> information -> service -> ECM info(green). Is there a ECM Pid shown?
0 members, 1 guests, 0 anonymous users