70 replies to this topic

[Dimitrij]

Where do I put it?

Don't need it anymore, just do it "Show 'Force init CI' in extensions menu" set yes

[Dimitrij]

Does not work. After blue button and pushing "Restart live TV service" nothing changes. only when moving to a DVB-S2 channel and switching back, the channel works correctly.

First physically disconnect and plug back the cable from this tuner(this reset Disecq).

Did you do it?

Edited by Dimitrij, 12 January 2022 - 10:51.

[Dimitrij]

Looks like a bug in the drivers. But confirmation from other users is required.

[satbob]

 

First physically disconnect and plug back the cable from this tuner(this reset Disecq).

Did you do it?

Yes I did.

[Dimitrij]

satbob

New test

 

last develop image

Add /usr/lib/enigma2/python/Screens//Satconfig.py

Restart GUI

Zap 5W and zap to service 28.2E is error

Open setup this tuner and change entry "Force legacy signal stats"(if yes set or if no set yes)

I added close/open frontend(tuner) after changing and saving settings

 

Let's see if this helps...

Edited by Dimitrij, 12 January 2022 - 18:39.

[satbob]

 

Open setup this tuner and change entry "Force legacy signal stats"(if yes set or if no set yes)

 I don't find the entry

[Dimitrij]

 

 

Open setup this tuner and change entry "Force legacy signal stats"(if yes set or if no set yes)

 I don't find the entry

 

"Setup mode" set "Expert"

[satbob]

Will do.

Edited by satbob, 13 January 2022 - 09:00.

[Dimitrij]

https://forums.openp...dpost&p=1416810

Any screenshot of the two, the bottom line.

[satbob]

Found it and set it to Yes but it made no difference

[Dimitrij]

Found it and set it to Yes but it made no difference

After press save(green key), at the beginning, the current broadcast stopped, then it started again?

[satbob]

No, but is is hard to say as one only sees the sat menu, or am I doing something wrong? There was nothing to see or hear once I closed the menu after having pressed save.

[Dimitrij]

No, but is is hard to say as one only sees the sat menu, or am I doing something wrong? There was nothing to see or hear once I closed the menu after having pressed save.

Before save -->“Geen data op transponder "

Afrer  save-->black screen?

Edited by Dimitrij, 13 January 2022 - 11:08.

[satbob]

No, after a while it says "No data on transponder".

 

Occasionally, there is a correct switch, but that also happened before. It is the exception that confirms the rule. I only noticed it when I started testing a lot. When everything works as it should you don't notice. And as I only listen to radio live (and there isn't a station I listen to that is part of a multistream) and record all the television programmes I want to watch, I only notice it when a recording fails (0 MB) or the radio remains silent.. When the exception occurs I don't see it in the recording list or I don't hear it when switching on the radio.

[Dimitrij]

I have one idea.

One of these days there will be a test for you.

[satbob]

OK

[Dimitrij]

satbob

test...

 

Develop image

in telnet:

init 4

ftp

copy old /usr/bin/enigma2 in PC(save in folder)

replace enigma2(from the archive vuduo4kse-enigma2.zip)  /usr/bin/

 

in telnet:

chmod 755 /usr/bin/enigma2
init 3

Edited by Dimitrij, 13 January 2022 - 22:38.

[satbob]

Sorry, no change.

[Dimitrij]

Sorry, no change.

			if (system == SYS_DVBS2)
			{
				p[cmdseq.num].cmd = DTV_ROLLOFF, p[cmdseq.num].u.data = rolloff, cmdseq.num++;
				p[cmdseq.num].cmd = DTV_PILOT, p[cmdseq.num].u.data = pilot, cmdseq.num++;
				if (m_dvbversion >= DVB_VERSION(5, 11))
				{
					p[cmdseq.num].cmd = DTV_STREAM_ID, p[cmdseq.num].u.data = parm.is_id, cmdseq.num++;
					p[cmdseq.num].cmd = DTV_SCRAMBLING_SEQUENCE_INDEX, p[cmdseq.num].u.data = parm.pls_code, cmdseq.num++;
				}
				else
				{
					p[cmdseq.num].cmd = DTV_STREAM_ID, p[cmdseq.num].u.data = parm.is_id | (parm.pls_code << 8) | (parm.pls_mode << 26), cmdseq.num++;
				}
				/* FIXME HACK ALERT use unused by enigma2 ISDBT SEGMENT IDX to pass T2MI PLP ID and T2MI PID */
				p[cmdseq.num].cmd = DTV_ISDBT_SB_SEGMENT_IDX, p[cmdseq.num].u.data = (static_cast<unsigned int>(parm.t2mi_plp_id) == eDVBFrontendParametersSatellite::No_T2MI_PLP_Id ? 0 : (0x80000000 | (parm.t2mi_pid << 16) | parm.t2mi_plp_id)), cmdseq.num++;
			}
+			else if (is_multistream())
+			{
+				p[cmdseq.num].cmd = DTV_STREAM_ID, p[cmdseq.num].u.data = eDVBFrontendParametersSatellite::No_Stream_Id_Filter, cmdseq.num++;
+				if (m_dvbversion >= DVB_VERSION(5, 11))
+				{
+					p[cmdseq.num].cmd = DTV_SCRAMBLING_SEQUENCE_INDEX, p[cmdseq.num].u.data = eDVBFrontendParametersSatellite::PLS_Default_Gold_Code, cmdseq.num++;
+				}
+				p[cmdseq.num].cmd = DTV_ISDBT_SB_SEGMENT_IDX, p[cmdseq.num].u.data = eDVBFrontendParametersSatellite::No_T2MI_PLP_Id, cmdseq.num++;
+			}
		}

I added to the Enigma code a reset of the multistream settings every time I switch to the DVB-S system.

Are you sure you replaced the binary correctly?

If that doesn't help, then I'm afraid there's nothing more I can do.

 

Once again...

To confirm the bug, in any case, the same problems are needed from other users.

 

[satbob]

I am quite sure, but I'll give it another try later today. I will get back to you then. And I want to thank you already for all the effort and time you invested in trying to find a solution.