33 replies to this topic

[fmiglius]

I added 2 DVB-T2 module.

Now I have 1 module DVB-S (A) and 3 module DVB-T2 (B-C-D).

I can't understand with managing the 3 modules DVB-T2 to be able to record 3 different programs at the same time.

Can anyone help me?

Thanks

Flavio  

[ccs]

I've got (had) 4 DVB-T2 tuners in my ET10K, and found it impossible to make all 4 work at the same time.

 

I had to remove tuner D. (Disabling it worked if it still had a feed, otherwise tuner C stopped working as well.)

 

Maybe a sat tuner in slot A will be different.

[WanWizard]

Afaik (or can remember), it is a hardware restriction. 4 DVB-S2 tuners is supported though.

 

I can't understand with managing the 3 modules DVB-T2 to be able to record 3 different programs at the same time.

 

What exactly don't you understand?

 

Just configure all three the same, and connect all three to the antenna cable, and it should work fine.

[Rick Hunter]

WanWizzard is correct,

There is a hardware restriction at the ET10k to use 4 the same tuners, other dan DVB-S2 tuners.

If I am correct, tuner A or C must be a DVB-S tuner.. That is what I forgot.. 

[fmiglius]

Afaik (or can remember), it is a hardware restriction. 4 DVB-S2 tuners is supported though.

 

I can't understand with managing the 3 modules DVB-T2 to be able to record 3 different programs at the same time.

 

What exactly don't you understand?

 

Just configure all three the same, and connect all three to the antenna cable, and it should work fine.

 

I have enabled the turners but i can't configure channels and manage channels

I hope I have explained

 

PS: see the page attach

 

Flavio

Attached Files

•  Immagine 2022-01-24 150021.png   142.99KB   3 downloads

Edited by fmiglius, 24 January 2022 - 15:05.

[WanWizard]

Not really.

 

Start by the beginning:

• Does Enigma see all your tuners (check via menu, information, about)?
• Have you configured each of them correctly (menu, setup, tuners and scanning, tuner configuration)?
• For DVB-T, did you select the correct country and regional transmitter?
• Did you you an automatic scan (network = yes)?

[fmiglius]

 

Not really.

 

Start by the beginning:

• Does Enigma see all your tuners (check via menu, information, about)? YES
• Have you configured each of them correctly (menu, setup, tuners and scanning, tuner configuration)? YES
• For DVB-T, did you select the correct country and regional transmitter? YES
• Did you you an automatic scan (network = yes)? YES BUT SEE ONLY THE A&B - NOT SEE C&D

 

I answer you in red

THKS

 

[WanWizard]

With the scan, if C and D are configured the same as either A or B, you won't see them, as it would be pointless to use them for a scan (the result would be identical to either A or .

[fmiglius]

With the scan, if C and D are configured the same as either A or B, you won't see them, as it would be pointless to use them for a scan (the result would be identical to either A or .

Attached Files

•  IMG20220124190730.jpg   94.57KB   2 downloads
•  IMG20220124190819.jpg   79.34KB   2 downloads

[Dimitrij]

Simple info https://forums.openp...ndpost&p=588919

[WanWizard]

I see nothing odd there.

[fmiglius]

I see nothing odd there.

 

 

therefore the configuration is correct..!!

[Dimitrij]

fmiglius

 

This is a technical forum.

Can you describe the problem normally (your actions step by step)?

Take a photo of the cable connection (rear view of the receiver).

Attach screenshots of the settings for each tuner.

[fmiglius]

fmiglius

 

This is a technical forum.

Can you describe the problem normally (your actions step by step)?

Take a photo of the cable connection (rear view of the receiver).

Attach screenshots of the settings for each tuner.

 

 

I would like to understand how to record three different DVB-T2 programs at the same time.

Now i would try to connect the three DVB-T2 with splitters and 3 separate cables instead of in series.

Do you think it is better to reinstall everything from the beginning?

thks

Flavio

[WanWizard]

Connecting them with splitters is fine.

 

And there is nothing to understand, Enigma is smart enough to select the second tuner when the second recording starts. If that doesn't happen, there's an issue with your tuner configuration.

 

I haven't seen any report of a recording issue before, you really need to give us all information, we can't guess what you do and what your problems are.

[Dimitrij]

 

I would like to understand how to record three different DVB-T2 programs at the same time.

At different frequencies?

[WanWizard]

At different frequencies?

 

you really need to give us all information, we can't guess what you do and what your problems are.

 

...


 

[fmiglius]

 

At different frequencies?

 

you really need to give us all information, we can't guess what you do and what your problems are.

 

...


 

 

 

 

 

I would like to understand how to record three different DVB-T2 programs at the same time.

At different frequencies?

 

 

surely. Different channels

[fmiglius]

I was thinking of changing the layout inside the STB

 

A = DVB-C/T2

B = DVB-C/T2

C = DVB-C/T2

D = DVB-S

 

what do you think?

Flavio

[WanWizard]

You still haven't explained what the problem is.

 

What EXACTLY do you do? What do you exact to happen? What does happen instead? What do (or don't) you see? Any messages?