33 replies to this topic

[fmiglius]

You still haven't explained what the problem is.

 

What EXACTLY do you do? What do you exact to happen? What does happen instead? What do (or don't) you see? Any messages?

 

I wrote it at the beginning. Did I not make myself clear? What do not you understand?

 

I added 2 DVB-T2 module.

Now I have 1 module DVB-S (A) and 3 module DVB-T2 (B-C-D).

I can't understand with managing the 3 modules DVB-T2 to be able to record 3 different programs (channels) at the same time.

Attached Files

•  IMG20220124190819.jpg   79.34KB   1 downloads
•  IMG20220124190730.jpg   94.57KB   1 downloads

[dolphs]

hmm interesting, this combination ( three streams/ recordings at same time on DVB-C ) does work

Although currently disabled as my ET10000 is yet a so called "hobby box" , I know DVB-C <> DVB-T2 but hey similar thing yo should think ... ... ...

 

I remember though there is a "limitation" but believe that has been discussed already on page 1 , even I noticed the page I was referring to ... 

In the printed manual the combinations possible are displayed, although your combination should be supported most likely one DVB-T2 need to be swapped with a combined tuner ( DVB-C/T2 ), but that is my guess only ....

Attached Files

•  Untitled.jpg   45.88KB   0 downloads

Edited by dolphs, 28 January 2022 - 10:05.

[dolphs]

apologies I missed that the modules installed are three combo tuners ... 

I added 2 DVB-T2 module.
Now I have 1 module DVB-S (A) and 3 module DVB-T2 (B-C-D).
I can't understand with managing the 3 modules DVB-T2 to be able to record 3 different programs at the same time.

Try to swap tuner 1 ( DVB-S2 ) to tuner 4 and vice versa, thus :  DVB-C/T2 : tiuner1,2,3 and DVB-S2: tuner 4 ".

The Si2169 module ( the added ones? ) I am not familiar with though

Edited by dolphs, 28 January 2022 - 10:13.

[ccs]

I doubt this makes things any clearer, it's the box the DVB-C/T2 tuner comes in .....

Attached Files

•  20220128_110232.jpg   174.32KB   0 downloads

[WanWizard]

I wrote it at the beginning. Did I not make myself clear? What do not you understand?

 

As someone who doesn't have a box with 3 DVB-T tuners, I can't do anything with "it doesn't work".

 

If you start a DVB-T recording, and zap to a DVB-T channel on another channel, what EXACTLY happens? Which tuner does Enigma select? Do you get any messages? Other details?

[Pr2]

Please read:

https://linux-tv.com...tunercam-setup/

[WanWizard]

From what I understand the TS has three DVB-C/T/T2 tuners, not C tuners.

[Pr2]

Yes but this box is known to not support any tuner setup. So probably that the one used by the user is not supported neither.

[hw9258]

The following tuner layout is working:

 

A = AVL6211 (DVB-S2)

B = AVL6211 (DVB-S2)

C = Si2169 (DVB-C/T2)

D = TDA18273 (DVB-C/T2)

 

Combinations of C, D = Si2169 or C, D = TDA18273 result in only tuner C working.

 

In fmiglius' case, perhaps the following will work:

 

A = AVL6211 (DVB-S2)

B = Si2169 (DVB-C/T2)

C = TDA18273 (DVB-C/T2)

D = Si2169 (DVB-C/T2)

 

or

 

A = AVL6211 (DVB-S2)

B = Si2169 (DVB-C/T2)

C = Si2169 (DVB-C/T2)

D = TDA18273 (DVB-C/T2)

[fmiglius]

Ho fatto alcuni test e la soluzione che sicuramente ha funzionato è:

 

A = Si2169 (DVB-C/T2)

B = TDA18273 (DVB-C/T2)

C = Si2169 (DVB-C/T2)

D = AVL6211 (DVB-S2)

 

se impostato automaticamente Enigma sceglie da solo quale dei tre DVB utilizzare per le registrazioni e fino a tre DVB-T simultanei.

Ho inserito uno splitter a 6 vie ma non è ancora sufficiente perché il segnale è debole.

Sono il più lontano dall'antenna.

Dovrò inserire un amplificatore?

comunque vi ringrazio tutti per i preziosi consigli

Flavio

Edited by fmiglius, 4 February 2022 - 23:22.

[Dimitrij]

 

Dovrò inserire un amplificatore?

Yes.

[littlesat]

In the fourth slot you cannot put all tuners

[fmiglius]

 

Ho fatto alcuni test e la soluzione che sicuramente ha funzionato è:

 

A = Si2169 (DVB-C/T2)

B = TDA18273 (DVB-C/T2)

C = Si2169 (DVB-C/T2)

D = AVL6211 (DVB-S2)

 

se impostato automaticamente Enigma sceglie da solo quale dei tre DVB utilizzare per le registrazioni e fino a tre DVB-T simultanei.

Ho inserito uno splitter a 6 vie ma non è ancora sufficiente perché il segnale è debole.

Sono il più lontano dall'antenna.

Dovrò inserire un amplificatore?

comunque vi ringrazio tutti per i preziosi consigli

Flavio

 

 

 

I did some tests and the solution that definitely worked is:

 

A = Si2169 (DVB-C/T2)

B = TDA18273 (DVB-C/T2)

C = Si2169 (DVB-C/T2)

D = AVL6211 (DVB-S2)

 

if set automatically Enigma chooses by itself which of the three DVBs to use for recording and up to three simultaneous DVB-T.

 

I have inserted a 6 way splitter but it is still not enough because the signal is weak.

I am farthest from the antenna.

Will I have to insert an amplifier?

anyway I thank you all for the valuable advice

Flavio

Edited by fmiglius, 6 February 2022 - 20:38.

[fmiglius]

In the fourth slot you cannot put all tuners

 

 

I put the D = AVL6211 (DVB-S2) and it work