Jump to content


Photo

Rai1 HD freezing box


  • Please log in to reply
71 replies to this topic

#1 Moonwalker

  • Senior Member
  • 192 posts

0
Neutral

Posted 10 February 2022 - 00:12

I have noticed that different boxes are hanging while watching RAI1 HD (13E). I have verified this on VU+ zero 4k, VU+ zero and Gigablue trio 4k. VU+ zero was with OpenPli7.1 while 4k with 8.1. Sometimes happens after few minutes and sometimes happens after few days. And when it freezes there is no activity at all just a frozen picture and box does not respond. 

I have not tested yet if when a box freezes other boxes freeze at the same time or not.



Re: Rai1 HD freezing box #2 WanWizard

  • PLi® Core member
  • 68,312 posts

+1,719
Excellent

Posted 10 February 2022 - 01:06

A bit difficult to test as I can't have a box tuned into RAI 1 HD for days. But no issue in the last 15-20 minutes.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Rai1 HD freezing box #3 Moonwalker

  • Senior Member
  • 192 posts

0
Neutral

Posted 18 February 2022 - 14:54

Did not notice it happening again. Maybe they had some transmission problems. Will post back if it reoccurs.



Re: Rai1 HD freezing box #4 Moonwalker

  • Senior Member
  • 192 posts

0
Neutral

Posted 3 March 2022 - 14:12

Happened again twice today. 

 

I noticed that even though channel is not encrypted there is some activity on oscam as below - 

 

  • 2022/03/03 14:06:36 0140E649 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5
  • 2022/03/03 14:06:39 0140E649 c (dvbapi) Demuxer 0 restarting decoding requests after 7 ms with 1 enabled and 0 disabled ecmpids!
  • 2022/03/03 14:06:39 0140E649 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2022/03/03 14:06:39 0140E649 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5
  • 2022/03/03 14:06:42 0140E649 c (dvbapi) Demuxer 0 restarting decoding requests after 6 ms with 1 enabled and 0 disabled ecmpids!
  • 2022/03/03 14:06:42 0140E649 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2022/03/03 14:06:43 0140E649 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5
  • 2022/03/03 14:06:46 0140E649 c (dvbapi) Demuxer 0 restarting decoding requests after 7 ms with 1 enabled and 0 disabled ecmpids!
  • 2022/03/03 14:06:46 0140E649 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

 

Not sure if this is the problem but when the box hangs there is still activity on the LAN leds. Box is still inaccessible though.

  •  


Re: Rai1 HD freezing box #5 Moonwalker

  • Senior Member
  • 192 posts

0
Neutral

Posted 6 March 2022 - 11:34

  • 2022/03/05 20:50:39 492417DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 restarting decoding requests after 7 ms with 1 enabled and 0 disabled ecmpids!
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5

 

 

This is how it stops. 

 

Has no one else noticed this?

 


Edited by Moonwalker, 6 March 2022 - 11:34.


Re: Rai1 HD freezing box #6 Pr2

  • PLi® Contributor
  • 6,046 posts

+256
Excellent

Posted 6 March 2022 - 12:41

I can confirm that OScam doesn't like that much watching RAI HD channels but you need to try to get support from streamboard (the home of OScam) or check on some Italian sat forum to get support.

OpenPLi is building OScam for its feed but they are not maintaining code and bug fixing it on itself.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Rai1 HD freezing box #7 mimisiku

  • Senior Member
  • 5,458 posts

+114
Excellent

Posted 7 March 2022 - 21:21

There is nothing wrong with OScam. RAI HD is sometimes coded in Nagra. I use a TivuSAT card and this works fine.
Met één been in het graf..... Helaas

Re: Rai1 HD freezing box #8 Pr2

  • PLi® Contributor
  • 6,046 posts

+256
Excellent

Posted 7 March 2022 - 23:05

I was watching RAI2 HD which was broadcasted in FTA and OScam just become totally unresponsive and I don't have TivuSat so I cannot test with it.

Anyway it was just a test to try to reproduce Moonwalker and it seems that indeed when you don't have TivuSat card Oscam gets into trouble.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Rai1 HD freezing box #9 mimisiku

  • Senior Member
  • 5,458 posts

+114
Excellent

Posted 8 March 2022 - 07:25

Off course OScam becomes unresponsive with FTA… 


Met één been in het graf..... Helaas

Re: Rai1 HD freezing box #10 Pr2

  • PLi® Contributor
  • 6,046 posts

+256
Excellent

Posted 8 March 2022 - 17:43

OScam is blocked and became then unresponsive

Edited by Pr2, 8 March 2022 - 17:43.

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Rai1 HD freezing box #11 mimisiku

  • Senior Member
  • 5,458 posts

+114
Excellent

Posted 9 March 2022 - 12:44

I See... Never experienced this on my box running with OScam...
Met één been in het graf..... Helaas

Re: Rai1 HD freezing box #12 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 9 March 2022 - 17:20

  • 2022/03/05 20:50:39 492417DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 restarting decoding requests after 7 ms with 1 enabled and 0 disabled ecmpids!
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5

 

CAID 0000 ? What does that mean ? Which Oscam do you use ?



Re: Rai1 HD freezing box #13 Gold_66

  • Senior Member
  • 30 posts

+2
Neutral

Posted 12 March 2022 - 15:48

 

  • 2022/03/05 20:50:39 492417DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 restarting decoding requests after 7 ms with 1 enabled and 0 disabled ecmpids!
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2022/03/05 20:50:42 492417DF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0000 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044D VPID 01F5

 

 

CAID 0000 looks weird indeed.

Try to exclude it in oscam with these lines in a file called "oscam.services" :

 

[RAI]
caid = 0000
provid = 000000

 

And then, add this line to oscam.server :

 

services = !RAI

 

Restart oscam and see if it happens again.



Re: Rai1 HD freezing box #14 alexwilmac

  • Member
  • 9 posts

0
Neutral

Posted 13 March 2022 - 10:34

I'm testing this issue since December and now I have two boxes to freely test, I can be sure (after a lot of tries, either with a box already "equipped" or with another when I started from scratch) it happens:

1) Only if you have VPS installed.

2) It now happens only on Ultimo4K and not also in Solo4K after the last VPS update.

3) Oscam has nothing to do with it: I tested it even for more than 24 hours, during which the box was on Rai1HD.

 

But the problem occurs ONLY on those RaiHD channel which have gone FTA since 14th December 2021, probably temporarily: Rai1HD, Rai3 HD, RaiSport+HD and others.

So, it's a paradox: Rai has no VPS system but VPS causes problems only on those channels.

In all other regularly encrypted Tivusat channels, I've never had any freezes.

 

When I found out this fact, I went back and forward many times to have confirms, and it is so.

I'm now testing a different VPS binary a friend sent me but, by this binary it is not able to record in "pure" VPS mode for those channels, like the Swiss ones, where it has always worked.

I'm now trying to be sure if, at least, this different binary is able to work at least in safe mode.

But, after hundreds of tiring tests, I'm now sure it's the VPS plugin the responsible.

As a final word, in case you wonder, the freezes happen even if there is no timer set on those RaiHD channels mentioned above.

Of course, there are other timers set for other channels, maybe, but the freezes occur even when they are not running.



Re: Rai1 HD freezing box #15 pierce

  • Senior Member
  • 25 posts

0
Neutral

Posted 4 April 2022 - 18:12

I am having the same problem. I noticed that if I switch off the Oscam, the box doesn't freeze. Also if I leave the box on any other Tivusat channel with oscam running, the box continues to run without any problem.



Re: Rai1 HD freezing box #16 Derupter

  • Member
  • 12 posts

0
Neutral

Posted 6 April 2022 - 22:40

I have the same problem and I partially solved it.
It happens mainly on RAI 1-2-3 HD, these services are mostly FTA and sometimes encrypted, the issue start when the channel goes from encrypted to FTA.
I have a Tivusat card with CAID 183D and I use Oscam with DVBAPI, this is what happens example with RAI 2 HD:
-I do the transponder scan and the channel is FTA, Oscam does nothing and it's all ok
-the channnel goes from FTA to encrypted, the various CAID appear, Oscam does his work and it's all ok
-the channel returns to FTA and here there can be two situations:
first case, the CA PMT is updated and a new CAID 0000 with ECMPID 1FFF appears (users without a tivusat card can have problems here)
second case, the CA PMT is updated and the NAGRA CAID stay there but all with ECMPID 1FFF
In both these cases Oscam try to descramble the old valid ECMPID (in my case 10CE) which should no longer be present because the channel is now FTA
Example log1 first case:

(dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 106A PROVID: 000030 PBM: 800000000000000 DATE: 6-4-2022
(dvbapi) Demuxer 0 ecmpid 2 CAID: 181B ECM_PID: 106A PROVID: 000030
(dvbapi) Demuxer 0 ecmpid 3 CAID: 183D ECM_PID: 10CE PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 4 CAID: 183E ECM_PID: 1132 PROVID: 000000
(dvbapi) Demuxer 0 found 5 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 3
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 received updated CA PMT for program 0D4A
(dvbapi) Demuxer 0 continues descrambling for program 0D4A
(dvbapi) Demuxer 0 ecmpid 5 CAID: 0000 ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 found 6 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 impossible to descramble PID 5 CAID 0000 PROVID 000000 ECMPID 1FFF PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 restarting decoding requests after 3 ms with 1 enabled and 5 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 5 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 5 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 5 disabled ecmpids!

Example log1 second case:
 
(dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 106A PROVID: 000030 PBM: 800000000000000 DATE: 31-3-2022
(dvbapi) Demuxer 0 ecmpid 2 CAID: 181B ECM_PID: 106A PROVID: 000030
(dvbapi) Demuxer 0 ecmpid 3 CAID: 183D ECM_PID: 10CE PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 4 CAID: 183E ECM_PID: 1132 PROVID: 000000
(dvbapi) Demuxer 0 found 5 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 received updated CA PMT for program 0D4A
(dvbapi) Demuxer 0 continues descrambling for program 0D4A
(dvbapi) Demuxer 0 ecmpid 5 CAID: 1856 ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 6 CAID: 183E ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 7 CAID: 183D ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 8 CAID: 181B ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 9 CAID: 0100 ECM_PID: 1FFF PROVID: 001B01 PBM: 000003025A00000 DATE: 4-3-1991
(dvbapi) Demuxer 0 found 10 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 impossible to descramble PID 5 CAID 1856 PROVID 000000 ECMPID 1FFF PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 impossible to descramble PID 6 CAID 183E PROVID 000000 ECMPID 1FFF PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 trying to descramble PID 7 CAID 183D PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 impossible to descramble PID 8 CAID 181B PROVID 000000 ECMPID 1FFF PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 impossible to descramble PID 9 CAID 0100 PROVID 001B01 ECMPID 1FFF PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 9 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 3 ms with 1 enabled and 9 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 3 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 3 ms with 1 enabled and 9 disabled ecmpids!

After 10-20 minutes of that restarting decoding requests, the box hangs and the only solution is turn off the power.
Now if I change the channel and return to RAI 2 HD, only the new pids are seen by oscam.
log2 First case:
(dvbapi) Demuxer 0 ecmpid 0 CAID: 0000 ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 found 1 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
log2 Second case:
(dvbapi) Demuxer 0 ecmpid 0 CAID: 1856 ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 1 CAID: 183E ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 2 CAID: 183D ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 3 CAID: 181B ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 1FFF PROVID: 001B01 PBM: 000003025A00000 DATE: 4-3-1991
(dvbapi) Demuxer 0 found 5 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 trying to descramble PID 2 CAID 183D PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 4 disabled ecmpids!
(dvbapi) Demuxer 0 trying to descramble PID 2 CAID 183D PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 4 disabled ecmpids!
In this second case it tries with ecmpid 1FFF but the channel is FTA

At this point those strange ecmpid remain in ecm info until the channel return to encrypted and every time I set it the oscam try to descramble the ecmpid 1FFF until the decoder freeze. (only in second case because in the first case the caid 0000 isn't processed as it should)
If the channel return to encrypted before the freeze, Oscam take the correct pid (in my case 10CE) and it works ok
Example:
log3
(dvbapi) Demuxer 0 ecmpid 0 CAID: 1856 ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 1 CAID: 183E ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 2 CAID: 183D ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 3 CAID: 181B ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 1FFF PROVID: 001B01 PBM: 000003025A00000 DATE: 4-3-1991
(dvbapi) Demuxer 0 found 5 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 trying to descramble PID 2 CAID 183D PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 044E VPID 01F6
(dvbapi) Demuxer 0 received updated CA PMT for program 0D4A
(dvbapi) Demuxer 0 continues descrambling for program 0D4A
(dvbapi) Demuxer 0 ecmpid 5 CAID: 1856 ECM_PID: 0FA2 PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 6 CAID: 0100 ECM_PID: 106A PROVID: 000030 PBM: 800000000000000 DATE: 3-4-2022
(dvbapi) Demuxer 0 ecmpid 7 CAID: 181B ECM_PID: 106A PROVID: 000030
(dvbapi) Demuxer 0 ecmpid 8 CAID: 183D ECM_PID: 10CE PROVID: 000000
(dvbapi) Demuxer 0 ecmpid 9 CAID: 183E ECM_PID: 1132 PROVID: 000000
(dvbapi) Demuxer 0 found 10 ECM pids and 10 STREAM pids in CA PMT
(dvbapi) Demuxer 0 impossible to descramble PID 5 CAID 1856 PROVID 000000 ECMPID 0FA2 PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 impossible to descramble PID 6 CAID 0100 PROVID 000030 ECMPID 106A PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 impossible to descramble PID 7 CAID 181B PROVID 000030 ECMPID 106A PMTPID 044E (NO MATCHING READER)
(dvbapi) Demuxer 0 trying to descramble PID 8 CAID 183D PROVID 000000 ECMPID 10CE ANY CHID PMTPID 044E VPID 01F6
(ecm) Ser (183D@000000/0000/0D4A/91:DA0E97D6C34E82D05D8CC6CEAA933D1D): found (201 ms) by TVSAT
(ecm) Ser (183D@000000/0000/0D4A/91:92F5E7AD715DBCA768CB2F4B3BF9011C): found (199 ms) by TVSAT
(ecm) Ser (183D@000000/0000/0D4A/91:234EFAA444610E79D1B42E4506AF1444): found (198 ms) by TVSAT

Then I added in oscam.dvbapi this line:
I: :::1FFF
So Oscam ignores the ecmpid 1FFF,this works if the channel is FTA and those stupid pids are in ecm info and it works when is encrypted, but when the channel goes from encrypted to FTA, what you see in log1 second case happens.
If I delete RAI 2 HD from channel list when there are those pids 1FFF and rescan the transponder,it returns FTA without ecmpids.
For those without a tivusat card that line in oscam.dvbapi should solve the issue like in log2 first case
For those with the card, there should be a setting to stop Oscam doing those things but i haven't found it
So where is the problem? RAI? OSCAM? ENIGMA2?

 



Re: Rai1 HD freezing box #17 Derupter

  • Member
  • 12 posts

0
Neutral

Posted 11 May 2022 - 07:29

The problem is fixed with the last Oscam 11711



Re: Rai1 HD freezing box #18 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 11 May 2022 - 12:10

So where is the problem? RAI? OSCAM? ENIGMA2?

 

In my opinion the problem lies in the old TVSAT card because it wasn't there before, so I think it has happened since the introduction of the 4K card.
I still have the first one released by TVSAT so very old.
I solved it like this:


Re: Rai1 HD freezing box #19 Guest-*0823016*

  • Guest
  • 396 posts

+2
Neutral

Posted 11 May 2022 - 12:11

The problem is fixed with the last Oscam 11711

The last one appears to me to be 11708.
How have they solved since you state this?


Re: Rai1 HD freezing box #20 samur

  • Member
  • 7 posts

0
Neutral

Posted 11 May 2022 - 15:47

 

The problem is fixed with the last Oscam 11711

The last one appears to me to be 11708.
How have they solved since you state this?

 

 

Here: https://trac.streamb.../oscam/timeline

;




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users