12 replies to this topic

[agadave]

Hello,

 

Is there a solution on openpli to turn off the front led and the LCD clock in standby (VFD display).

 

The VFD plugin does not allow this.

 

 

On Openatv it is possible with LED display setup menu

 

On Gigablue 4K UE it is possible with command (don't workon Trio 4K)

echo 0 > /proc/stb/fp/enable_led
echo 0 > /proc/stb/fp/led0_pattern
echo 0 > /proc/stb/fp/led1_pattern
echo 0 > /proc/stb/fp/oled_brightness

 

Thank you

[WanWizard]

Works fine here?

 

 1_0_19_22C5_80D_2_11A0000_0_0_0_20220224112701.jpg   95.29KB   7 downloads

[agadave]

thanks but

no line operating LED or switch on the display, in my menu DISPLAY SETUP

Just Brightness and Standby

 

Gigablue Trio 4K and openpli 8.1 ver 20/02/2022

[WanWizard]

Might be added after the 8.1 release, I only run nightly builds on all my boxes.

 

In which case you either need to switch to a nightly build, or wait for 8.2-release, which is not too long away.

[Dimitrij]

https://forums.openp...ttach_id=144802

[agadave]

Might be added after the 8.1 release, I only run nightly builds on all my boxes.

 

In which case you either need to switch to a nightly build, or wait for 8.2-release, which is not too long away.

 

Test with nightly build,, test build and openpli 7.3 : Just Brightness and Standby

[WanWizard]

Then it might need fixing.

 

Just to double check, as I don't have a box handy, you do have:

ls -l /proc/stb/fp | grep led
-rw-r--r--    1 root     root             0 Feb 25 12:09 ledpowercolor
-rw-r--r--    1 root     root             0 Feb 25 12:09 ledstandbycolor
-rw-r--r--    1 root     root             0 Feb 25 12:09 ledsuspendledcolor

?

 

I assume not, which means it is a driver issue. If these options are present in ATV, Gigablue has to update the BSP with the new drivers.

[agadave]

Then it might need fixing.

 

Just to double check, as I don't have a box handy, you do have:

ls -l /proc/stb/fp | grep led
-rw-r--r--    1 root     root             0 Feb 25 12:09 ledpowercolor
-rw-r--r--    1 root     root             0 Feb 25 12:09 ledstandbycolor
-rw-r--r--    1 root     root             0 Feb 25 12:09 ledsuspendledcolor

?

 

I assume not, which means it is a driver issue. If these options are present in ATV, Gigablue has to update the BSP with the new drivers.

 

 

Just one line

-rw-r--r-- 1 root root 0 Feb 25 17:01 oled_brightness

[agadave]

....

 

Hello Dimitrij,

 

dont' work: global name 'MODEL_NAME' is not defined

[WanWizard]

-rw-r--r-- 1 root root 0 Feb 25 17:01 oled_brightness

Just one line

 

Thought so. So work for gigablue...

[agadave]

Hello,

without a soft solution, I applied a hard solution  :

- opening the box

- blue electrical tape on the power LEDs

- red translucent tape on the display.

 

At minimum brightness, the time can be seen without illuminating the room.

 

[eura]

I have a Ultimo 4K in bedroom with the same issue it was to bright in standby so I change the color for the clock to dark red (maybe I added that color in the xml file)  then the date to black and name it to /usr/share/enigma2/display/skin_default/skin_display_night.xml, and copy the original file and named it  skin_display_day.xml

The I associated the script to hotkeys (long red). Then I just change color of the front display when I like by pressing red button long

 

#!/bin/bash
mode=$(cat mode.txt)
#Check mode
        if [ "$mode" != "nightmode" ]; then
#Copy nightskin
            echo nightmode>mode.txt
            cp /usr/share/enigma2/display/skin_default/skin_display_night.xml /usr/share/enigma2/display/skin_default/skin_display.xml
        else
#Copy  nightskin to mode.txt      
        echo daymode>mode.txt
# Copy dayskin
        cp /usr/share/enigma2/display/skin_default/skin_display_day.xml /usr/share/enigma2/display/skin_default/skin_display.xml
        fi
#Restart enigma, go to standby 
wget -O /dev/null -q http://127.0.0.1/web/powerstate?newstate=3
sleep 8
wget -O /dev/null -q http://127.0.0.1/web/powerstate?newstate=0

sleep 8 = 8 sec works with my Ultimo maybe you need to change it ???

 

 

P.S  Add this at the top of the script if you like to make sure you can't restart enigma when you made a recording.

if [ $(wget -O- -q http://localhost/web/timerlist | grep "<e2state>2</e2state>" | grep -cm 1 "2") = 1 ] ; then   
		echo -e "\nRecording !! ...\n"
		exit
	fi  

 

 

[agadave]

 

I have a Ultimo 4K in bedroom with the same issue it was to bright in standby so I change the color for the clock to dark red (maybe I added that color in the xml file)  then the date to black and name it to /usr/share/enigma2/display/skin_default/skin_display_night.xml, and copy the original file and named it  skin_display_day.xml

The I associated the script to hotkeys (long red). Then I just change color of the front display when I like by pressing red button long

 

#!/bin/bash
mode=$(cat mode.txt)
#Check mode
        if [ "$mode" != "nightmode" ]; then
#Copy nightskin
            echo nightmode>mode.txt
            cp /usr/share/enigma2/display/skin_default/skin_display_night.xml /usr/share/enigma2/display/skin_default/skin_display.xml
        else
#Copy  nightskin to mode.txt      
        echo daymode>mode.txt
# Copy dayskin
        cp /usr/share/enigma2/display/skin_default/skin_display_day.xml /usr/share/enigma2/display/skin_default/skin_display.xml
        fi
#Restart enigma, go to standby 
wget -O /dev/null -q http://127.0.0.1/web/powerstate?newstate=3
sleep 8
wget -O /dev/null -q http://127.0.0.1/web/powerstate?newstate=0

sleep 8 = 8 sec works with my Ultimo maybe you need to change it ???

 

 

P.S  Add this at the top of the script if you like to make sure you can't restart enigma when you made a recording.

if [ $(wget -O- -q http://localhost/web/timerlist | grep "<e2state>2</e2state>" | grep -cm 1 "2") = 1 ] ; then   
		echo -e "\nRecording !! ...\n"
		exit
	fi  

no color on the trio clock just the ability to dim the brightness