That would suggest some mapping is done low level, in the drivers, which in turn suggests the manufacturer needs to fix it.
How will it be possible to get this information to the manufacturer?
Thanks
Pulse 4K HDMI-CEC
Started by pereira69, 24 Feb 2022 20:28
88 replies to this topic
Re: Pulse 4K HDMI-CEC #21
-
- Senior Member
- 93 posts
0
Neutral
Posted 28 February 2022 - 09:48
Re: Pulse 4K HDMI-CEC #22
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 28 February 2022 - 21:25
I don’t think the manufacturer will actually care that HDMI-CEC doesn’t perform like you like it to be.
If you are willing to explain in a clear way what should be changed, I am willing to forward your message.
I can’t test it myself as my test TV doesn’t respond on HDMI-CEC at all and I refuse to connect all kind of testboxes on my LG OLED.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Pulse 4K HDMI-CEC #23
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 28 February 2022 - 21:37
The test is the other way around, so control the box with the remote of the TV.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Pulse 4K HDMI-CEC #24
-
- Senior Member
- 93 posts
0
Neutral
Posted 28 February 2022 - 21:59
The test is the other way around, so control the box with the remote of the TV.
Unfortunately you can't control the box with the TV remote, I can control the sound on AV Onkyo with the TV remote but I can't change the channel on the box, go to the info page and nothing else
Re: Pulse 4K HDMI-CEC #25
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 28 February 2022 - 22:26
Yes, I know that, that is the point of this, If Frenske has to to explain to the manufacturer exactly what the problem is, he needs to understand that.
Somewhere in the hardware or software there is a translation between the CEC signal and CEC command code, and from CEC command code to key code.
We have no idea where it goes wrong, from the tests of Pr2, appearently already in the first step, because he sees the same CEC command codes for the different keys on the TV remote.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Pulse 4K HDMI-CEC #26
-
- Senior Member
- 93 posts
0
Neutral
Posted 28 February 2022 - 23:36
And how to get the information to the manufacturer ?
I can't find official or unofficial Pulse4K support forum, thank you very much for all the support
Re: Pulse 4K HDMI-CEC #27
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 28 February 2022 - 23:38
You won’t get this information. I will forward your info.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Pulse 4K HDMI-CEC #28
-
- Senior Member
- 93 posts
0
Neutral
Posted 1 March 2022 - 00:36
You won’t get this information. I will forward your info.
Thank you very much
Re: Pulse 4K HDMI-CEC #29
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 1 March 2022 - 10:43
In the meantime I forwarded this link to them so he will be able to read all what has been written regarding this ‘issue’.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Pulse 4K HDMI-CEC #30
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 8 March 2022 - 17:55
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Pulse 4K HDMI-CEC #31
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 8 March 2022 - 18:05
OE is updated.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Pulse 4K HDMI-CEC #32
-
- Member
- 23 posts
0
Neutral
Posted 31 December 2022 - 11:46
HDMI cec it does not wake up the receiver. Interestingly, only the pulse4k has this problem, the ultimo4k and the Viper 4K V40 wake it up without a problem. There could be a software problem here.
Re: Pulse 4K HDMI-CEC #33
-
- Member
- 23 posts
0
Neutral
Posted 1 January 2023 - 12:06
HDMI cec it does not wake up the receiver. Interestingly, only the pulse4k has this problem, the ultimo4k and the Viper 4K V40 wake it up without a problem. There could be a software problem here.
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 00
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <Give OSD Name> < 46 BE
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:26 <Active Source> < 82 11
Rx: 11:44:26 <Routing Information> < 81 11
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:27 <Set Stream Path> < 86 11
Rx: 11:44:27 <Active Source> < 82 11
Rx: 11:44:28 <Set Stream Path> < 86 11
Rx: 11:44:28 <Active Source> < 82 11
Tx: 11:44:41 <Standby> > 36 [0x00]
Tx: 11:44:41 <User Control Pressed> > 44 6C [0x05]
Tx: 11:44:41 <Standby> > 36 [0x05]
Tx: 11:45:29 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:29 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:29 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Released> < 45 6D
Rx: 11:45:30 <Set System Audio Mode> < 72 01
Tx: 11:45:32 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:32 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:32 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:32 <Set System Audio Mode> < 72 01
Rx: 11:45:45 <Give Physical Address> < 83 00
Tx: 11:45:45 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set Stream Path> < 86 11
Rx: 11:48:25 <Routing Information> < 81 11
Rx: 11:48:26 <Set Stream Path> < 86 11
Rx: 11:48:26 <Active Source> < 82 11
Rx: 11:48:27 <Set Stream Path> < 86 11
Rx: 11:48:27 <Active Source> < 82 11
Tx: 11:48:39 <Standby> > 36 [0x00]
Tx: 11:48:39 <User Control Pressed> > 44 6C [0x05]
Tx: 11:48:39 <Standby> > 36 [0x05]
Tx: 11:50:18 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:18 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:18 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:19 <Reporting Device Vendor ID>< 87 00
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give Physical Address> < 83 01
Tx: 11:50:19 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give OSD Name> < 46 01
Tx: 11:50:19 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:50:20 <Give OSD Name> < 46 00
Tx: 11:50:20 <Set OSD Name> > 47 pulse4k [0x00]
Tx: 11:50:21 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:21 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:21 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:22 <Set System Audio Mode> < 72 01
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 00
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <Give OSD Name> < 46 BE
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:26 <Active Source> < 82 11
Rx: 11:44:26 <Routing Information> < 81 11
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:27 <Set Stream Path> < 86 11
Rx: 11:44:27 <Active Source> < 82 11
Rx: 11:44:28 <Set Stream Path> < 86 11
Rx: 11:44:28 <Active Source> < 82 11
Tx: 11:44:41 <Standby> > 36 [0x00]
Tx: 11:44:41 <User Control Pressed> > 44 6C [0x05]
Tx: 11:44:41 <Standby> > 36 [0x05]
Tx: 11:45:29 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:29 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:29 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Released> < 45 6D
Rx: 11:45:30 <Set System Audio Mode> < 72 01
Tx: 11:45:32 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:32 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:32 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:32 <Set System Audio Mode> < 72 01
Rx: 11:45:45 <Give Physical Address> < 83 00
Tx: 11:45:45 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set Stream Path> < 86 11
Rx: 11:48:25 <Routing Information> < 81 11
Rx: 11:48:26 <Set Stream Path> < 86 11
Rx: 11:48:26 <Active Source> < 82 11
Rx: 11:48:27 <Set Stream Path> < 86 11
Rx: 11:48:27 <Active Source> < 82 11
Tx: 11:48:39 <Standby> > 36 [0x00]
Tx: 11:48:39 <User Control Pressed> > 44 6C [0x05]
Tx: 11:48:39 <Standby> > 36 [0x05]
Tx: 11:50:18 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:18 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:18 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:19 <Reporting Device Vendor ID>< 87 00
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give Physical Address> < 83 01
Tx: 11:50:19 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give OSD Name> < 46 01
Tx: 11:50:19 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:50:20 <Give OSD Name> < 46 00
Tx: 11:50:20 <Set OSD Name> > 47 pulse4k [0x00]
Tx: 11:50:21 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:21 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:21 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:22 <Set System Audio Mode> < 72 01
Re: Pulse 4K HDMI-CEC #34
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 1 January 2023 - 17:21
More likely a signal level incompatibility between box and TV. There are more combinations that have issues.
It sends the correct commands, the rest is hardware.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Pulse 4K HDMI-CEC #35
-
- Member
- 23 posts
0
Neutral
Posted 1 January 2023 - 19:04
Thanks! But I don't understand that my other receivers wake up from standby, only the pulse 4k doesn't.
Re: Pulse 4K HDMI-CEC #36
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 2 January 2023 - 15:08
The Pulse4K is capable to turn on TV but it is adviced to set the minimal delay to send message to 50 ms that's the way I setup my Pulse 4K.
But there is an issue when there are 2 STB connected on the same TV, when I was testing the Pulse4K and the VU+ Duo4K on the same TV it was a real nightmare to have the TV to switch to the right entry. The TV after a very long time switch to the right entry. But wake-up / shutdown of the TV always works properly for me with the Pulse 4K (tested on Samsung, Panasonic and Sony TVs).
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Pulse 4K HDMI-CEC #37
-
- Member
- 23 posts
0
Neutral
Posted 2 January 2023 - 20:59
My problem with the pulse 4k receiver is that I can't get it to wake up from standby.
Re: Pulse 4K HDMI-CEC #38
-
- Member
- 23 posts
0
Neutral
Posted 3 January 2023 - 09:02
Basically none of the settings in the HDMI-CEC Setup menu are working to wake the Pulse 4K
Re: Pulse 4K HDMI-CEC #39
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 3 January 2023 - 09:58
Show a screenshot of the settings
+
set fixed address
and
"Repeat leave standby messages" 250ms
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Pulse 4K HDMI-CEC #40
-
- Member
- 23 posts
0
Neutral
Posted 3 January 2023 - 18:33
Show a screenshot of the settings
+
set fixed address
and
"Repeat leave standby messages" 250ms
19 user(s) are reading this topic
0 members, 19 guests, 0 anonymous users
