Is it possible to install python-six on openpli 7.3, if so where do I find it? Thanks
python-six needed
Re: python-six needed #2
Posted 27 February 2022 - 20:28
python-siz? You mean this: https://pypi.org/project/six
2 x ultimo4k (dvb-c fbc + 1 dvb-s2, 8.3r/nb) + een et10k/osmini (geen tuners en dus fallbackclient, nb) met een Synology ds214+ (2 x 6 TB) op DSM 7.1.1 in ziggo oost (voormalig @Home) + A1/A2/A3/HB (TechniSat)
Re: python-six needed #3
Re: python-six needed #4
Re: python-six needed #5
Re: python-six needed #6
Posted 27 February 2022 - 23:03
The feed package is marked for armv7ahf-neon architecture, but I see no reason for that... It might just work on your box.
You can open the downloaded .tar.gz with Winrar. Look inside for a file called six.py and extract it. Put it on your box in the directory /usr/lib/python2.x/site-packages
Edit: it is on the 7.x feed. Just try this instead: telnet/ssh into your box and type:
opkg install python-six
Edited by scriptmelvin, 27 February 2022 - 23:10.
Re: python-six needed #7
Posted 27 February 2022 - 23:45
The feed package is marked for armv7ahf-neon architecture, but I see no reason for that... It might just work on your box.
You can open the downloaded .tar.gz with Winrar. Look inside for a file called six.py and extract it. Put it on your box in the directory /usr/lib/python2.x/site-packages
Edit: it is on the 7.x feed. Just try this instead: telnet/ssh into your box and type:
opkg install python-six
Thank you.will try tomorrow and report back as it's late here...
Re: python-six needed #8
Posted 28 February 2022 - 08:33
The feed package is marked for armv7ahf-neon architecture, but I see no reason for that... It might just work on your box.
You can open the downloaded .tar.gz with Winrar. Look inside for a file called six.py and extract it. Put it on your box in the directory /usr/lib/python2.x/site-packages
Edit: it is on the 7.x feed. Just try this instead: telnet/ssh into your box and type:
opkg install python-six
Thank you Scriptmelvin. your method worked a treat.
Re: python-six needed #9
Re: python-six needed #10
Posted 12 January 2023 - 20:17
root@lunix4k:~# python --version Python 2.7.13 root@lunix4k:~# opkg update Downloading http://downloads.openpli.org/feeds/openpli-7-release/3rd-party-armv7ahf-neon/Packages.gz. Updated source 'openpli-3rd-party-armv7ahf-neon'. Downloading http://downloads.openpli.org/feeds/openpli-7-release/3rd-party/Packages.gz. Updated source 'openpli-3rd-party'. Downloading http://downloads.openpli.org/feeds/openpli-7-release/3rd-party-lunix4k/Packages.gz. Updated source 'openpli-3rd-party-lunix4k'. Downloading http://downloads.openpli.org/feeds/openpli-7-release/all/Packages.gz. Updated source 'openpli-all'. Downloading http://downloads.openpli.org/feeds/openpli-7-release/armv7ahf-neon/Packages.gz. Updated source 'openpli-armv7ahf-neon'. Downloading http://downloads.openpli.org/feeds/openpli-7-release/lunix4k/Packages.gz. Updated source 'openpli-lunix4k'. Downloading http://downloads.openpli.org/feeds/openpli-7-release/picons/Packages.gz. Updated source 'openpli-picons'. root@lunix4k:~# opkg install python-six No packages installed or removed. root@lunix4k:~#
Re: python-six needed #11
Posted 12 January 2023 - 20:36
Means "already installed".
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users