Vuplus support by open pli
Re: Vuplus support by open pli #21
Re: Vuplus support by open pli #22
Posted 3 March 2022 - 18:36
Is another update or upgrade busy?
you can update the box by cli, like you showed before, is it still not possible? Did you already try to upgrade after a reboot.
opkg update && opkg upgrade
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Vuplus support by open pli #23
Posted 3 March 2022 - 18:48
Alcohol for wimps. Strong people enjoy depression.
Re: Vuplus support by open pli #24
Posted 3 March 2022 - 18:49
Alcohol for wimps. Strong people enjoy depression.
Re: Vuplus support by open pli #25
Posted 3 March 2022 - 18:59
That is our providers' cdn node in London.
Is the war now causing network traffic from Russia being blocked?
You can try changing the opkg feed URL's in /etc/opkg from "downloads" to "download2", which is the cdn node in Frankfurt.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Vuplus support by open pli #27
Re: Vuplus support by open pli #28
Posted 3 March 2022 - 19:40
What is the output of "opkg update" now?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Vuplus support by open pli #29
Re: Vuplus support by open pli #30
Re: Vuplus support by open pli #31
Re: Vuplus support by open pli #32
Posted 3 March 2022 - 21:56
same
and does is show download2 in the error messages?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Vuplus support by open pli #33
Posted 3 March 2022 - 22:01
According to the logs, it downloads just fine. But sometimes extremely slow.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Vuplus support by open pli #34
Re: Vuplus support by open pli #35
Re: Vuplus support by open pli #36
Posted 11 March 2022 - 08:57
So disappointed with VU+, I've been using various VU set top boxes for years together with Open PLi images.
You could express your disappointment to the Vu+ wholesaler in your country.
BTW, as long as we can build images the enduser can still use our images. From the moment changes in the BSP, which is maintained by Vu+, the enduser will suffer from the lack of cooperation with Vu+ because new innovations will no longer be implementable in our image. One of those things now is the implementation of CI+.
Vu+'s failure to communicate is the only reason the collaboration stopped. Apparently, this was their choice. That’s the reason they are less prominent present on our downloadpage but still the image are downloadable via this link.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Vuplus support by open pli #37
Posted 5 April 2022 - 17:31
So disappointed with VU+, I've been using various VU set top boxes for years together with Open PLi images.
You could express your disappointment to the Vu+ wholesaler in your country.
BTW, as long as we can build images the enduser can still use our images. From the moment changes in the BSP, which is maintained by Vu+, the enduser will suffer from the lack of cooperation with Vu+ because new innovations will no longer be implementable in our image. One of those things now is the implementation of CI+.
Vu+'s failure to communicate is the only reason the collaboration stopped. Apparently, this was their choice. That’s the reason they are less prominent present on our downloadpage but still the image are downloadable via this link.
Will this change the situation? http://www.hd-digita...uation-changed/
Re: Vuplus support by open pli #38
Re: Vuplus support by open pli #39
Posted 6 April 2022 - 16:08
I wouldn’t know whether it was a delayed April Fools joke or that Vu+ actually decided to offer support to other imagebuilders. I doubt whether this actually is a fact but never say ‘never’.
I deleted previous post(s) because this is the OpenPLi board and there is no need to place links to other images with one purpose, promotion of that specific other image due to the fact that the collaboration between Vu+ and OpenPLi is over due to unknown reasons.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users