40 replies to this topic

[Sefu]

Thanks, here it is in zip.

Attached Files

•  enigma.20220321.zip   35.37KB   7 downloads

[ccs]

35,000+ lines containing [eMPEGStreamParserTS] broken startcode doesn't look very healthy.

[Dimitrij]

Sefu

Use openVIX image for test.

[filepush] revert back to 2020-11-23

[Sefu]

I have tried to install openvix-6.0.008.release-vuduo4kse and it does exactly the same freezing.

I can not watch 2 programs at the same time, or watch 1 program and record another on the same transponder without it freezing.

It stays on the same tuner within the same transponder, it only changes tuner when I select a channel on another transponder.

 

What can I do ? thanks in advance...

[Dimitrij]

 

I have tried to install openvix-6.0.008.release-vuduo4kse and it does exactly the same freezing.

I can not watch 2 programs at the same time, or watch 1 program and record another on the same transponder without it freezing.

It stays on the same tuner within the same transponder, it only changes tuner when I select a channel on another transponder.

 

What can I do ? thanks in advance...

 

The last test, if you don't mind .

[SEC] Fix 0 byte recording issue in linked tuner.

Install this image to test http://code.vuplus.c...model=vuduo4kse

Edited by Dimitrij, 23 March 2022 - 06:19.

[Sefu]

Now  http://code.vuplus.c...model=vuduo4kse is installed, but how do i install softcam on this image?

[Dimitrij]

Do not know.

You will have to find out for yourself.

Can you check the two FTA channels?

[Sefu]

it works with 2, 3 & 4 FTA channels in vuplus image without freezing �
Is there an opportunity to make it work in openpli

[Dimitrij]

it works with 2, 3 & 4 FTA channels in vuplus image without freezing �
Is there an opportunity to make it work in openpli

Second step.

Need check not FTA services, use softcam.

Edited by Dimitrij, 24 March 2022 - 10:41.

[Sefu]

OK. but I must first figure out how to install softcam on this image.

I will report back as soon as possible.

[Dimitrij]

For developers. Your opinion?

--- a/lib/dvb/frontend.cpp
+++ b/lib/dvb/frontend.cpp
@@ -1712,7 +1712,7 @@
 		if (tmp == -1 && sec_fe != this && !prev->m_inuse) {
 			int state = sec_fe->m_state;
 			// workaround to put the kernel frontend thread into idle state!
-			if (state != eDVBFrontend::stateIdle && state != stateClosed)
+			if (!m_fbc && state != eDVBFrontend::stateIdle && state != stateClosed)
 			{
 				sec_fe->closeFrontend(true);
 				state = sec_fe->m_state;
@@ -2844,6 +2844,24 @@
 	else
 		m_sec_sequence = list;
 	return 0;
+}
+
+bool eDVBFrontend::isScheduledSendDiseqc()
+{
+	bool has_senddiseqc = false;
+	if ( m_sec_sequence && m_sec_sequence.current() != m_sec_sequence.end() )
+	{
+		eSecCommandList::iterator cur = m_sec_sequence.current();
+		while(cur != m_sec_sequence.end())
+		{
+			if (((cur++)->cmd == eSecCommand::SEND_DISEQC))
+			{
+				has_senddiseqc = true;
+				break;
+			}
+		}
+	}
+	return has_senddiseqc;
 }
 
 RESULT eDVBFrontend::getData(int num, long &data)
--- a/lib/dvb/frontend.h
+++ b/lib/dvb/frontend.h
@@ -181,6 +181,8 @@
 	void set_FBCTuner(bool yesno) { m_fbc = yesno; }
 	bool getEnabled() { return m_enabled; }
 	void setEnabled(bool enable) { m_enabled = enable; }
+	bool isLoopTimerActive() { return m_tuneTimer->isActive(); }
+	bool isScheduledSendDiseqc();
 	bool is_multistream();
 	std::string getCapabilities();
 };
--- a/lib/dvb/sec.cpp
+++ b/lib/dvb/sec.cpp
@@ -375,6 +375,8 @@
 			int RotorCmd=-1;
 			int send_mask = 0;
 
+			bool direct_connected = m_not_linked_slot_mask & slot_id;
+
 			lnb_param.guard_offset = 0; //HACK
 
 			frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx);
@@ -384,7 +386,7 @@
 
 			frontend.getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satposDependPtr);
 
-			if (!(m_not_linked_slot_mask & slot_id))  // frontend with direct connection?
+			if (!direct_connected)  // frontend with direct connection?
 			{
 				long linked_prev_ptr;
 				frontend.getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
@@ -396,7 +398,8 @@
 				}
 				if (satposDependPtr != -1)  // we dont need uncommitted switch and rotor cmds on second output of a rotor lnb
 					diseqc_mode = eDVBSatelliteDiseqcParameters::V1_0;
-				else {
+				else if (!((eDVBFrontend*)fe)->is_FBCTuner())
+				{
 					// in eDVBFrontend::tuneLoop we call closeFrontend and ->inc_use() in this this condition (to put the kernel frontend thread into idle state)
 					// so we must resend all diseqc stuff (voltage is disabled when the frontend is closed)
 					int state;
@@ -495,15 +498,22 @@
 
 				bool send_csw =
 					(di_param.m_committed_cmd != eDVBSatelliteDiseqcParameters::SENDNO);
-				bool changed_csw = send_csw && (forceChanged || csw != lastcsw);
 
 				bool send_ucsw =
 					(di_param.m_uncommitted_cmd && diseqc_mode > eDVBSatelliteDiseqcParameters::V1_0);
-				bool changed_ucsw = send_ucsw && (forceChanged || ucsw != lastucsw);
 
 				bool send_burst =
 					(di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO);
-				bool changed_burst = send_burst && (forceChanged || toneburst != lastToneburst);
+
+				bool changed_csw = false;
+				bool changed_ucsw = false;
+				bool changed_burst = false;
+				if (direct_connected || (linked_fe && (!linked_fe->m_frontend->isLoopTimerActive() || !linked_fe->m_frontend->isScheduledSendDiseqc())))
+				{
+					changed_csw = send_csw && (forceChanged || csw != lastcsw);
+					changed_ucsw = send_ucsw && (forceChanged || ucsw != lastucsw);
+					changed_burst = send_burst && (forceChanged || toneburst != lastToneburst);
+				}
 
 				/* send_mask
 					1 must send csw

 

[Sefu]

I have tried to install openpli again and it also works fine with 2, 3 & 4 FTA channels simultaneously on the same transponder without freezing.

 

So the problem is the code channels on the same transponder.

 

I can easily record 4 different channels and watch a fifth channel without it freezing just the channels are on separate transponders

 

Could it be a problem in softcam

[Dimitrij]

 

Could it be a problem in softcam

What emulator are you using?

What card / settings?

[Sefu]

Emulator are CCcam

[Dimitrij]

Emulator are CCcam

Use oscam for trst.

[MachIII]

I had the samer problem with a Duo2. Tried both cccam and oscam. Had to revert back to Openpli 6.2 and now everything is perfect.

[Sefu]

I have switched to VTi 15.0.0 Image which has a different tuner configuration program and now my VU + DUO 4K SE works perfectly…

 

I can both watch and record on all 8 tuners at the same time without it chopping or freezing, and it does not matter that it is on the same transponder. And now it also changes channels extremely fast.

 

Thanks for the help

 

My tuner setup….

​

 

Tuner Slot A

connection​

Tuner A​

Tuner B​

Tuners C to H​

configuration​

expanded​

expanded​

Like tuner B, these tuners can be assigned an SCR frequency. Please note that the frequencies for each tuner may only be assigned once!

 

With "Connected to" one tuner must be connected to the other and not all set to "Connected to Tuner A"!

 

​

​Tuner C must say "connected to B", tuner D "connected to C", etc.

 

 

 

satellite​

0.8° W​

0.8° W​

LNB​

LNB 1​

LNB 1​

priority​

automobile​

automobile​

LOF​

Unicable​

Unicable​

Unicable configuration​

Unicable Matrix / LNB / user defined​

Unicable Matrix / LNB / user defined​

manufacturer​

Megasat​

Megasat​

Type​

Diavolo​

Diavolo​

channel​

SCR 01​

SCR 02​

frequency​

1210​

1420​

Tied together​

no​

Yes​

Attached to​

 

Tuner A​

DiSEqC mode​

No​

No​

[Sefu]

 

Tuner Slot A

connection

Tuner A

Tuner B

Tuners C to H

configuration

expanded

expanded

Like tuner B, these tuners can be assigned an SCR frequency. Please note that the frequencies for each tuner may only be assigned once!

With "Connected to" one tuner must be connected to the other and not all set to "Connected to Tuner A"!

Tuner C must say "connected to B", tuner D "connected to C", etc.

satellite

0.8° W

0.8° W

LNB

LNB 1

LNB 1

priority

automobile

automobile

LOF

Unicable

Unicable

Unicable configuration

Unicable Matrix / LNB / user defined

Unicable Matrix / LNB / user defined

manufacturer

Megasat

Megasat

Type

Diavolo

Diavolo

channel

SCR 01

SCR 02

frequency

1210

1420

Tied together

no

Yes

Attached to

 

Tuner A

DiSEqC mode

No

No

[Sefu]

My tuner setup….

 

Tuner Slot A

connection

Tuner A

Tuner B

Tuners C to H

configuration

expanded

expanded

Like tuner B, these tuners can be assigned an SCR frequency. Please note that the frequencies for each tuner may only be assigned once!

With "Connected to" one tuner must be connected to the other and not all set to "Connected to Tuner A"!

Tuner C must say "connected to B", tuner D "connected to C", etc.

satellite

0.8° W

0.8° W

LNB

LNB 1

LNB 1

priority

automobile

automobile

LOF

Unicable

Unicable

Unicable configuration

Unicable Matrix / LNB / user defined

Unicable Matrix / LNB / user defined

manufacturer

Megasat

Megasat

Type

Diavolo

Diavolo

channel

SCR 01

SCR 02

frequency

1210

1420

Tied together

no

Yes

Attached to

 

Tuner A

DiSEqC mode

No

No

[Sefu]

My tuner setup….

Attached Files

•  Tuner config.jpg   35.91KB   1 downloads
•  Tuner A_B_C_D.jpg   97.52KB   1 downloads
•  Tuner E_F_G_H.jpg   100.89KB   1 downloads