69 replies to this topic

[WanWizard]

On a home network, two computers share their disks. They are added to OpenPLI 8.2 by standard means (as in all previous versions of OpenPLI).

 

Yes, and?
 

I still have no clue what your problem is.

[Sharp987]

 

On the videoenhancement plugin, the value does not work when a parameter is changed

thanks

 

"the value"?

 

This:

Attached Files

•  video.jpg   120.87KB   8 downloads

Edited by Sharp987, 22 May 2022 - 17:25.

[delphinia]

 

On a home network, two computers share their disks. They are added to OpenPLI 8.2 by standard means (as in all previous versions of OpenPLI).

 

Yes, and?
 

I still have no clue what your problem is.

 

Main menu > Setup > System > Expert settings > Select a network adapter > Network configuration > MountManager > ... added... > Press OK to activate the settings > Are you sure you want to save this network mount? > YES... After that the system hangs tightly and does not restart.

Is it clear now?

Attached Files

•  screenshot_20220522192402.jpg   97.46KB   6 downloads
•  screenshot_20220522192432.jpg   65.38KB   5 downloads

Edited by delphinia, 22 May 2022 - 17:47.

[delphinia]

After an update, or a flash? What do you mean with "network resources are not added"?

Upgrading is not possible, only fresh installation. This is the first public release of version 8.2.

Attached Files

•  2022-05-22_194934.jpg   39.31KB   6 downloads

[sarab_h]

hi I have just updated my Solo2 to 8.2 thanks guys.

Just have two problems:

1. in my box screen I do not see any thing other than VU+ solo2. it should show the channel name and ..

2. in plugins I get some plugins are not available : extensions/openwebif (EOF read where object expected)

 

please help to fix these two errors

[sarab_h]

I ha seen one more error

 

Collected errors: * pkg_run_script: package "samba-common" postinst script returned status 1. * opkg_configure: samba-common.postinst returned 1.

No packages installed or removed.

Configuring samba-common.

[Leo1971]

Hi, I have installed 8.2 in my VU + Uno 4k. Unfortunately, I can't find where I can turn on transcoding.

Can anyone help me?

[WanWizard]

Hi, I have installed 8.2 in my VU + Uno 4k. Unfortunately, I can't find where I can turn on transcoding.

 

There is nothing to turn on, it is always turned on.
 

[WanWizard]

hi I have just updated my Solo2 to 8.2 thanks guys.

 

Not out of flash space? Not in all cases is an update possible, epsecially on old boxes with limited flash memory.

[WanWizard]

Main menu > Setup > System > Expert settings > Select a network adapter > Network configuration > MountManager > ... added... > Press OK to activate the settings > Are you sure you want to save this network mount? > YES... After that the system hangs tightly and does not restart.

Is it clear now?

 

Yes.

 

So 192.168.1.2 is a Windows machine? Does it have a share called "D", or are you trying to connect to the hidden share D$ ? And I assume you entered a username and password?

 

SMBv1 and guest logins have been disabled everywhere for quite some time, but if it is waiting for a timeout, eventually it will fall through, and you can restart enigma in debug mode so you have a debug log you can look into.\

 

I don't have anything running Windows, so if other users can report their experience?

[WanWizard]

This:

<screenshot>

 

This is something a developer needs to look at.
 

[delphinia]

 

Main menu > Setup > System > Expert settings > Select a network adapter > Network configuration > MountManager > ... added... > Press OK to activate the settings > Are you sure you want to save this network mount? > YES... After that the system hangs tightly and does not restart.

Is it clear now?

 

Yes.

 

So 192.168.1.2 is a Windows machine? Does it have a share called "D", or are you trying to connect to the hidden share D$ ? And I assume you entered a username and password?

 

SMBv1 and guest logins have been disabled everywhere for quite some time, but if it is waiting for a timeout, eventually it will fall through, and you can restart enigma in debug mode so you have a debug log you can look into.\

 

I don't have anything running Windows, so if other users can report their experience?

 

Yes, 192,168.1.2 is a Windows machine.

And it has a share named "D".

Access without a password, that's how it's configured.

In release 8.1 and earlier, there were no problems with connecting to network resources, as in other Enigma2 images for Zgemma H9 Twin. This problem also appeared some time ago in the Develop image.

I don't have time to further test the 8.2 release, so I'll wait for the 8.2 authors to fix the problem and continue using the 8.1 release.

[WanWizard]

Older code used to try the user "guest" (if needed with password "guest") if nothing was filled in.

 

This has been removed quite recently since current security requirements mean this support is being phased out (both Linux and Windows). So you might try that, it could you have enabled guest access on your Window device.

[WanWizard]

This has been changed 16 days ago: https://github.com/O...6a736feb7df303b

[Leo1971]

 

Hi, I have installed 8.2 in my VU + Uno 4k. Unfortunately, I can't find where I can turn on transcoding.

 

There is nothing to turn on, it is always turned on.
 

 

 

The problem is that an external application that received a transcoded stream on port 8002 in the previous version of openpli now reports an error and no stream.

[delphinia]

Older code used to try the user "guest" (if needed with password "guest") if nothing was filled in.

 

This has been removed quite recently since current security requirements mean this support is being phased out (both Linux and Windows). So you might try that, it could you have enabled guest access on your Window device.

 

This has been changed 16 days ago: https://github.com/O...6a736feb7df303b

Thanks for the comprehensive answer.

After entering the login "guest" and password "guest" network resources are added without problems.

PS. Their incorrect sorting remained in the list of storage devices, but you can put up with this and wait for a decision from the authors.

[WanWizard]

The problem is that an external application that received a transcoded stream on port 8002 in the previous version of openpli now reports an error and no stream.

 

I don't own a Uno 4K, but I have no problem on the Duo 4K or the Solo 4K, both on port 8002.

 

Example for NPO1 HD:

http://172.19.12.52:8002/1:0:19:5225:C99:3:EB0000:0:0:0:?bitrate=3000000&width=1280&height=720&aspectratio=2&interlaced=0

 

[Guest-*0823016*]

I didn't understand but how can I help with my 4Kse one.

[WanWizard]

Open the web interface, and press on the phone icon in front of a channel. Does a transcoded stream start?

[Guest-*0823016*]

Open the web interface, and press on the phone icon in front of a channel. Does a transcoded stream start?

Ok now I'm at work, as soon as I get home I'll do it.