GigaBlue UHD Quad 4K
dual DVB-SX FBC tuner
dual plug & play DVB-SX tuner
dual DVB-SX FBC tuner(A/B) --> sat 36E --> using CI+ module Tricolor TV
DVB-SX tuner(I) --> sat 13E/19.2E/4.8E
DVB-SX tuner(J) --> rotor or test sat 0.8W
1)When zap any service using CI+ module then tuner J, and sometimes I, stops working, zap any service(FTA or not).
There is a signal(snr/agc), but there is no picture, a message appears "No data on transponder!\n(Timeout reading PAT)".
As soon as I remove the module physically or reset the module through the CI menu, an image appears on the tuners I or J.
This works until the first switch to the service CI+ module Tricolor TV.
2)USB DVB-T tuner Sundtek MediaTV Digital Home III/AVerMedia A857 alwajs not scan services.
Tested image openPLi/openATV.
Who had similar problems?
https://www.hdfreaks...DVB-T-New-user/
I think I have found the cause of not working DVB-T tuner. Somehow, but inserted CAM module does not allow terrestrial tuner to work. For example, if I turn on some terrestrial channel and it does not show anything, then I remove CAM module and picture immediately appears on the screen.
CAM module is for Tricolor TV and it is assigned to specific services
Edited by Dimitrij, 23 May 2022 - 10:02.
