9 replies to this topic

[leoo2001]

Hi all,

I have a problem with OpenPLi 8.2 installed at multiboot on Vu+ duo 4k and Lnb unicable Opticum Usr16 pro.

Setting the tuners correctly I have only signal on A, B, C, D, E

F, G, H are configured exactly the same but no signal can be acquired. My configuration is as follows:

 

A: set to 39e, unicable, Scr1 not connected - full signal lock

B: set to 13e/19e, universal lnb, dual - full signal on both satellites

C: set to 39e, unicable, Scr2 connected to A - full signal lock

D: set to 39e, unicable, Scr3 connected to A - full signal lock

E: set to 39e, unicable, Scr4 connected to A - full signal lock

F: set to 39e, unicable, Scr5 connected to A - no signal

G: set to 39e, unicable, Scr6 connected to A - no signal

H: set to 39e, unicable, Scr7 connected to A - no signal

 

Turning FCC on or off make no difference at all.

 

I really want to install Openpli on the flash memory as the current image BlackHole in no longer supported.

Any help will be appreciated.

 

[WanWizard]

I have a Duo 4K with two FBC cards, one connected to a Jultec and one connected to an Inverto, both unicable. I have no issues with reception.

 

No issue with the UB frequencies of the Opticum Usr16 pro definition? i.e. if you swap the config for E and F, does the problem swap too?

[leoo2001]

Thank you for your reply. I have only 1 FBC card with the configuration mentioned above.

Actually if I swap the Scr configs of the C, D, E with F, G, H then I have signal on those last 3, but I lose the signal on the first 3.

Don`t know whats happening. Maybe I will try to install new image from scratch on the flash memory.

Only for the comparison have tried Openatv and no similar issues with the tuners, but very slow zapping.

OpenBH have exactly the same results as Openpli- (OpenBh have very irritating history zapping behavior imho).

Edited by leoo2001, 11 June 2022 - 16:33.

[WanWizard]

I think I see the issue.

 

Can you edit

/usr/share/enigma2/unicable.xml

on the box, and change

<product name="SCR 16UB Pro" scrs="1210,1420,1680,2040,985,1050,1115,1275,1340,1485,1550,1615,1745,1810,1875,1940"/>

to

<product name="SCR 16UB Pro" format="jess" scrs="1210,1420,1680,2040,985,1050,1115,1275,1340,1485,1550,1615,1745,1810,1875,1940"/>

and restart Enigma?

 

and if that doesn't help,

<product name="SCR 16UB Pro" format="dSCR,4" scrs="1210,1420,1680,2040,985,1050,1115,1275,1340,1485,1550,1615,1745,1810,1875,1940"/>

[leoo2001]

Thank you very much, that was really helpful

 

Using

<product name="SCR 16UB Pro" format="jess" scrs="1210,1420,1680,2040,985,1050,1115,1275,1340,1485,1550,1615,1745,1810,1875,1940"/>

All tuners have signal, except E (scr4 - 2040)

 

Using the next string made the magic happen       

<product name="SCR 16UB Pro" format="dSCR,4" scrs="1210,1420,1680,2040,985,1050,1115,1275,1340,1485,1550,1615,1745,1810,1875,1940"/>

Now all tuners are working as it should.

Thank you. Really appreciate the help received here.

 

[WanWizard]

Thanks for the feedback, I've updated the file accordingly.

[holi]

Hi. Pls add this one also:
 

          <product name="Unicable II LNB" format="jess" scrs="1210,1420,1680,2040,978,1028,1072,1116,1160,1271,1315,1359,1484,1528,1572,1616,2084,2128,1816,1860,1904,1948,1992,1728"/>

 

cause after update I lost my config. Thanks

[WanWizard]

Which brand is this?

[holi]

Opticum

[WanWizard]

Thanks, added.