@Sagitarius
Wat doet
http://<IP adres van je box>/lcd4linux/config
Posted 17 September 2022 - 11:10
De optie LCD4linux instellingen zit nu wel in de OWIF, maar krijg ''Deze pagina is niet bereikbaar 404 error''
Als ik de ''Lcd4linux instellingen'' aanklik zie ik dit http://192.168.1.80:...cd4linux/config krijg ik bovenstaande error, ik gebruik 8088 als Webif poort.
Edited by Sagitarius, 17 September 2022 - 11:14.
73's
PE1AQZ
Posted 17 September 2022 - 11:49
73's
PE1AQZ
Posted 17 September 2022 - 11:54
Hier ook niet werkend te krijgen.
Hetzelfde als bovenstaande ik den dat deze gemaakt moet met Py3 ondersteuning (denk ik)
Edited by cobus, 17 September 2022 - 11:56.
Groetjes Cobus R
VU+ UNO 4K SE FBC DVB-C (8x)
MUTANT HD66SE FBC DVB-C (3x)
MAXYTEC MULTIBOX COMBO
MUTANT HD60 DVB-S
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Posted 17 September 2022 - 15:44
Krijg bij Applicaties nog steeds deze melding.
Met telnet installeren
opkg install python3-requests
Wordt met de nieuwe build ook automatisch geinstalleerd.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 17 September 2022 - 16:21
En wat is de error?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 September 2022 - 16:28
Dat is niet de error, dat is "er is een error". De fout zelf staat in de do_install log.
Klinkt als een hosttools depenency issue?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 September 2022 - 16:31
Heeft geen haast langzaam etenstijd hier.
Morgen verder uitzoeken en melden.
Log data follows:
| DEBUG: Executing python function autotools_aclocals
| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
| DEBUG: Python function autotools_aclocals finished
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are ['/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/quilt/quilt-native_0.66.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-core/readline/readline_8.1.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/opkg-utils/opkg-utils_0.4.3.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.1n.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/python/python3_3.9.9.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-core/util-linux/util-linux_2.36.2.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/automake/automake_1.16.3.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-extended/bzip2/bzip2_1.0.8.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/autoconf/autoconf_2.71.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/gcc/gcc-runtime_10.3.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-support/libffi/libffi_3.3.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/chrpath/chrpath_0.16.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/autoconf-archive/autoconf-archive_2019.01.06.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-core/glibc/glibc_2.33.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-support/sqlite/sqlite3_3.35.0.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-extended/xz/xz_5.2.5.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/pkgconfig/pkgconfig_git.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-extended/bzip2/bzip2_1.0.8.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/meta-openpli/recipes-core/libxcrypt/libxcrypt_4.4.28.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-extended/libtirpc/libtirpc_1.3.1.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-extended/xz/xz_5.2.5.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-extended/libnsl/libnsl2_git.bb:do_populate_sysroot', '/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/gcc/gcc-crosssdk_10.3.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.11.bb:do_populate_sysroot', 'virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-support/gdbm/gdbm_1.19.bb:do_populate_sysroot', '/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/libtool/libtool-native_2.4.6.bb:do_populate_sysroot', 'virtual:native:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot']
| NOTE: Installed into sysroot: []
| NOTE: Skipping as already exists in sysroot: ['quilt-native', 'nativesdk-readline', 'nativesdk-opkg-utils', 'nativesdk-openssl', 'python3-native', 'nativesdk-util-linux', 'automake-native', 'bzip2-native', 'autoconf-native', 'nativesdk-gcc-runtime', 'nativesdk-libffi', 'chrpath-native', 'autoconf-archive-native', 'nativesdk-glibc', 'nativesdk-sqlite3', 'nativesdk-xz', 'pkgconfig-native', 'nativesdk-bzip2', 'nativesdk-libxcrypt', 'nativesdk-libtirpc', 'xz-native', 'nativesdk-libnsl2', 'gcc-crosssdk-x86_64-oesdk-linux', 'nativesdk-zlib', 'nativesdk-gdbm', 'libtool-native', 'pseudo-native', 'nativesdk-ncurses', 'libtirpc-native', 'libnsl2-native', 'gdbm-native', 'sqlite3-native', 'openssl-native', 'util-linux-native', 'libffi-native', 'zlib-native', 'readline-native', 'nativesdk-libcap-ng', 'nativesdk-libpcre2', 'nativesdk-util-linux-libuuid', 'texinfo-dummy-native', 'm4-native', 'gnu-config-native', 'nativesdk-libgcc', 'nativesdk-linux-libc-headers', 'gettext-minimal-native', 'gettext-native', 'binutils-crosssdk-x86_64-oesdk-linux', 'libmpc-native', 'flex-native', 'mpfr-native', 'gmp-native', 'patch-native', 'libcap-ng-native', 'util-linux-libuuid-native', 'libpcre2-native', 'ncurses-native', 'attr-native']
| DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_install
| The necessary bits to build these optional modules were not found:
| _bz2 _dbm _gdbm
|
| WARNING: /home/hans/enigma2/openpli-oe-core/build/tmp/work/x86_64-nativesdk-oesdk-linux/nativesdk-python3/3.9.9-r0/temp/run.do_install.774056:159 exit 1 from '/home/hans/enigma2/openpli-oe-core/build/tmp/work/x86_64-nativesdk-oesdk-linux/nativesdk-python3/3.9.9-r0/check_build_completeness.py /home/hans/enigma2/openpli-oe-core/build/tmp/work/x86_64-nativesdk-oesdk-linux/nativesdk-python3/3.9.9-r0/temp/log.do_compile'
| WARNING: Backtrace (BB generated script):
| #1: do_install, /home/hans/enigma2/openpli-oe-core/build/tmp/work/x86_64-nativesdk-oesdk-linux/nativesdk-python3/3.9.9-r0/temp/run.do_install.774056, line 159
| #2: main, /home/hans/enigma2/openpli-oe-core/build/tmp/work/x86_64-nativesdk-oesdk-linux/nativesdk-python3/3.9.9-r0/temp/run.do_install.774056, line 264
| ERROR: ExecutionError('/home/hans/enigma2/openpli-oe-core/build/tmp/work/x86_64-nativesdk-oesdk-linux/nativesdk-python3/3.9.9-r0/temp/run.do_install.774056', 1, None, None)
ERROR: Task (virtual:nativesdk:/home/hans/enigma2/openpli-oe-core/openembedded-core/meta/recipes-devtools/python/python3_3.9.9.bb:do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2490 tasks of which 2486 didn't need to be rerun and 1 failed.
Edited by luisteraar, 17 September 2022 - 16:34.
Posted 17 September 2022 - 17:03
Dat bedoel ik .
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 September 2022 - 17:47
Zit die ppanel nog steeds in de huidige (py3) NB? Ik dacht dat deze eruit gehaald zou worden?
2 x ultimo4k (dvb-c fbc + 1 dvb-s2, 9.0r/nb) + een et10k/osmini ((nb) geen tuners en dus fallbackclient, nb) met een Synology ds214+ (2 x 6 TB) op DSM 7.1.1 in ziggo oost (voormalig @Home) + A1/A2/A3/HB (TechniSat)
Posted 17 September 2022 - 18:03
Zit die ppanel nog steeds in de huidige (py3) NB? Ik dacht dat deze eruit gehaald zou worden?
Wilden daar juist melding van maken, maar je was mij voor. Maar ik had hem er als eerste uit.
LCD4linux werkt hier op de Vu+Duo4K als vanouds, inclusief de webif
Edited by HPPli, 17 September 2022 - 18:06.
Posted 17 September 2022 - 18:08
We zijn op dit moment alle commits aan de python2 kant van de laatste maanden aan het nalopen, want blijkbaar hebben deze lang niet allemaal de migratie gehaald.
Het is lastig gebleken om bij parallel werk alle acties in sync te houden.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 September 2022 - 18:22
Vooral met dank aan @Beeker, die heeft zeker een dikke veer in 't achterste verdiend !
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 September 2022 - 19:49
Ik gooi hem er ook altijd (als eerste) uit maar ik had niet verwacht dat deze in de image zou zitten.
Zit die ppanel nog steeds in de huidige (py3) NB? Ik dacht dat deze eruit gehaald zou worden?
Wilden daar juist melding van maken, maar je was mij voor. Maar ik had hem er als eerste uit.
2 x ultimo4k (dvb-c fbc + 1 dvb-s2, 9.0r/nb) + een et10k/osmini ((nb) geen tuners en dus fallbackclient, nb) met een Synology ds214+ (2 x 6 TB) op DSM 7.1.1 in ziggo oost (voormalig @Home) + A1/A2/A3/HB (TechniSat)
Posted 17 September 2022 - 19:53
Ik ben inmiddels door de 10-verschillen-lijst van OE heen, dus ook uit de basis in de eerstvolgende build.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 3 guests, 0 anonymous users