27 replies to this topic

[WanWizard]

yes , agree, would be great fix automount

 

Could you see if this one fixes the problem?

Attached Files

•  mount.sh   7.41KB   15 downloads

[kallquk]

Yes, it worked perfectly.

 

Thank you very much

[WanWizard]

Thanks for the feedback.

[littlesat]

Good solution.

[kallquk]

I am so sorry to notify you that is doing again:

 

 

root@h7:~# mount
/dev/mmcblk0p5 on / type ext4 (rw,relatime,data=ordered)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=149272k,nr_inodes=37318,mode=755)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
/dev/sdc1 on /media/usb type ext4 (rw,relatime,data=ordered)
/dev/sdb2 on /media/usb type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/usb type ext4 (rw,relatime,data=ordered)
/dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
192.168.6.37:/media/hdd/movie on /media/net/37 type nfs (rw,noatime,vers=3,rsize=32768,wsize=32768,namlen=255,soft,nolock,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.6.37,mountvers=3,mountport=35479,mountproto=tcp,local_lock=all,addr=192.168.6.37)
192.168.6.37:/media/usb on /media/net/37a type nfs (rw,noatime,vers=3,rsize=32768,wsize=32768,namlen=255,soft,nolock,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.6.37,mountvers=3,mountport=35479,mountproto=tcp,local_lock=all,addr=192.168.6.37)

 

There are time to time that work ok, and other times no, like above

I tried attaching device, and tried rebooting with device on, too, In both cases is the result above.

The device is an orico model with two sata slots, where hdds(one of them has two partitions) stand vertically. In few words, there is one usb connection to stb, only.

Edited by kallquk, 25 November 2022 - 18:06.

[Dimitrij]

This?

 

Please answer in telnet:

for D in /sys/block/sd*; do echo "$D : $(readlink -fn $D/device)"; done

 

Attached Files

•  index.jpg   5.82KB   0 downloads

Edited by Dimitrij, 26 November 2022 - 09:24.

[WanWizard]

Did you do an update in the meantime? As that would overwrite the script with the old broken version/

[kallquk]

 

This?

 

Please answer in telnet:

for D in /sys/block/sd*; do echo "$D : $(readlink -fn $D/device)"; done

Yes, this in the picture is what I am using

 

Your command output:

 

 

root@h7:~# for D in /sys/block/sd*; do echo "$D : $(readlink -fn $D/device)"; done
/sys/block/sda : /sys/devices/platform/rdb/f045a000.sata/ata1/host0/target0:0:0/0:0:0:0
/sys/block/sdb : /sys/devices/platform/f0470300.ehci/usb1/1-1/1-1.2/1-1.2:1.0/host2/target2:0:0/2:0:0:0
/sys/block/sdc : /sys/devices/platform/f0470300.ehci/usb1/1-1/1-1.2/1-1.2:1.0/host2/target2:0:0/2:0:0:1
root@h7:~#

 

 

 

Did you do an update in the meantime? As that would overwrite the script with the old broken version/

No, I did not any update, except executing sometimes  command "opkg update"

 

At this moment downloaded from stb the file, so you can see if is yours.

 

I did 3-4 reboots last night, after them two of them were as /media/usb(not three but sdc1, sdb2). After last reboot and now, it is as expected.

Attached Files

•  mount.sh   7.41KB   2 downloads