7 replies to this topic

[jpuigs]

root@sf8008:~# opkg install astra-sm
Installing astra-sm (0.2+git1957+44bcd28) on root
Downloading http://downloads.openpli.org/feeds/openpli-develop/cortexa15hf-neon-vfpv4/astra-sm_0.2+git1957+44bcd28-r0.7_cortexa15hf-neon-vfpv4.ipk.
Configuring astra-sm.
update-rc.d: /etc/init.d/astra-sm: file does not exist
* pkg_run_script: package "astra-sm" postinst script returned status 1.
* opkg_configure: astra-sm.postinst returned 1.
root@sf8008:~#

update-rc.d: /etc/init.d/astra-sm: file does not exist

Yes, it doesn't exist because it's located at /etc/init.d/astra/astra-sm

Edited by jpuigs, 24 November 2022 - 17:55.

[Beeker]

Reinstall after new build.

 

https://github.com/O...7887bc67b1891a3

 

Installs without errors for me.

[jpuigs]

 

Talking about astra-sm.....

It has been happening since I have astra-sm package on boxes several years ago.

When doing an online upgrade, and astra-sm is updated, box doesn't finish update (reboot) unless you kill astra-sm.

On screen we see "box is updating........."  and after 5 minutes when you see it's still updating, you have to kill astra-sm on a telnet session.
Then box reboots instantly.

 

Same thing happens when you do a backup to flash a clean image,

When you're asked to restore settings, the top progress bar which shows restored % , it stops on astra-sm package.

Unless you kill it, it won't continue restoring.

[Beeker]

Can't confirm.

Downloading http://192.168.178.10/feeds/openpli-homebuild/gbtrio4k/enigma2-plugin-extensions-graphmultiepg_3.9+git20442+edc9eb8-r0_gbtrio4k.ipk.
Upgrading astra-sm (0.2+git1957+44bcd28-r0) to astra-sm (0.21+git1957+44bcd28) on root
Downloading http://192.168.178.10/feeds/openpli-homebuild/cortexa15hf-neon-vfpv4/astra-sm_0.21+git1957+44bcd28-r0_cortexa15hf-neon-vfpv4.ipk.
Stopping astra-sm
update-rc.d: /etc/init.d/astra-sm exists during rc.d purge (continuing)
 Removing any system startup links for astra-sm ...
  /etc/rc0.d/K20astra-sm
  /etc/rc1.d/K20astra-sm
  /etc/rc2.d/S20astra-sm
  /etc/rc3.d/S20astra-sm
  /etc/rc4.d/S20astra-sm
  /etc/rc5.d/S20astra-sm
  /etc/rc6.d/K20astra-sm
Upgrading enigma2-plugin-systemplugins-satfinder (3.9+git20441+5342675-r0) to enigma2-plugin-systemplugins-satfinder (3.9+git20442+edc9eb8) on root
Downloading http://192.168.178.10/feeds/openpli-homebuild/gbtrio4k/enigma2-plugin-systemplugins-satfinder_3.9+git20442+edc9eb8-r0_gbtrio4k.ipk.
Upgrading enigma2-plugin-systemplugins-videotune (3.9+git20441+5342675-r0) to enigma2-plugin-systemplugins-videotune (3.9+git20442+edc9eb8) on root
........

Configuring tuxbox-common.
Configuring enigma2-plugin-extensions-lcd4linux.
Configuring enigma2.
Configuring enigma2-plugin-extensions-mediaplayer.
Configuring enigma2-plugin-systemplugins-hdmicec.
Configuring enigma2-plugin-extensions-graphmultiepg.
Configuring astra-sm.
 Adding system startup for /etc/init.d/astra-sm.
Starting astra-sm with astra-sm.lua as config file
Configuring enigma2-plugin-systemplugins-satfinder.
Configuring enigma2-plugin-systemplugins-videotune.
Configuring enigma2-plugin-extensions-audiosync.
root@gbtrio4k:~# init 3
root@gbtrio4k:~# 

In normal time.

For test I've bumped the version to 0.21 in recipe.

Could be that the -astra-sm: file does not exist- patch also has fixed the opkg upgrade problem you mention (update-rc.d problem),

 

Update: Too fast. Telnet session stuck after 'exit' command

Edited by Beeker, 2 December 2022 - 07:23.

[jpuigs]

Next time I'll try command line update, I always do the GUI (1 - recommended) option

 

It's not a new issue, I have seen it since years ago in other machines apart from SF8008, f.i. in ET10K...

You flash a (new) clean image, and when installed and asked to restore settings and plugins, you say "yes", and restoring process gets stuck in astra-sm module, at the beginning....

Then you kill astra-sm, and restoring continues....

Edited by jpuigs, 2 December 2022 - 16:21.

[Beeker]

With telnet the session stuck between -logout- and -Connection closed by foreign host- after install or update.

I have to start a second telnet session and give the command -kill 10706-  (telnetd PID).

 

Hard to fix.

On the other hand, development of astra-sm is dead for years.

[antrabe]

there is any way to works as oither images with abertis on 30W?

[antrabe]

there is any way to works as oither images with abertis on 30W?

 

solved