Springen naar inhoud


Foto

channel list problem help


  • Please log in to reply
Er zijn 22 reacties in dit onderwerp

#1 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 25 december 2022 - 05:27

Hi
I have installed openpli8.3 fresh image,
First is the satellite 100.5 east scan,
The second place is 13 of East Scan,
Any satellite scan after 13east, the new scan of 13east disappears.
And the old list is displayed which is in the receiver from the first day,
Is there any solution to this so that no matter how many satellites I scan, the new scan of 13 East does not disappear.
good luck,



Re: channel list problem help #2 WanWizard

  • PLi® Core member
  • 70204 berichten

+1798
Excellent

Geplaatst op 25 december 2022 - 15:57

When does it disappear?

 

The data is only saved when Enigma is restarted, otherwise it stays in memory, and is lost if Enigma crashes, or if you switch the box off by cutting the power.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: channel list problem help #3 littlesat

  • PLi® Core member
  • 57057 berichten

+698
Excellent

Geplaatst op 25 december 2022 - 16:00

There is only one last scanned userbouquet…. You need to copy and rename the bouquet maybe before you scan a new position?

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: channel list problem help #4 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 25 december 2022 - 16:59

Hi
If I don't scan any satellites after 13est, the channel list doesn't disappear.
But if I scan any satellite after 13east, the new channel list of 13east disappears.



Re: channel list problem help #5 WanWizard

  • PLi® Core member
  • 70204 berichten

+1798
Excellent

Geplaatst op 25 december 2022 - 17:06

What is "the new channel list"?

 

Scanning doesn't create "lists". it only updates the channel database.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: channel list problem help #6 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 25 december 2022 - 17:25

Hi
New means that now I scan 13 East, after that whenever I scan any satellite, the channel list of 13 East will disappear.



Re: channel list problem help #7 Abu Baniaz

  • PLi® Contributor
  • 2493 berichten

+64
Good

Geplaatst op 25 december 2022 - 18:19

How are you making the channel list for 13e? Scanning adds channels /services to lamedb, it does not create a channel list(bouquet) apart from the last scanned. Last scanned bouquet is always a list of the last scanned channels. It will not contain previous scans.

If you don't know how to create bouquets/lists, just ask how to do it and people will help.

Are you sure that 13e channels are disappearing? Press up (next to OK) green for satellites/orbital position. They should be there.

If they are being removed, post a screenshot of the scan settings you are using. I wonder if you have selected clear before scan and that tuner physically! Hardware does not have 13e, but in software/config you have told the box there is.

Maybe record a video showing issue and upload it. You have been at this same problem for many months over a few forums. It would be nice to help you solve it.

Re: channel list problem help #8 WanWizard

  • PLi® Core member
  • 70204 berichten

+1798
Excellent

Geplaatst op 25 december 2022 - 19:36

That is why I asked what was meant with "channel list", as scanning doesn't create lists.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: channel list problem help #9 Pr2

  • PLi® Contributor
  • 6165 berichten

+261
Excellent

Geplaatst op 26 december 2022 - 00:51

You need to put your box into standby to have the lamedb and the userbouquet properly saved before you switch it off.

I guess that you scan the channel and power off the box after that without first putting it into standby, so your channel list is not saved and at next start you retrieve the last proper standby channel list.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: channel list problem help #10 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 26 december 2022 - 12:52

That is why I asked what was meant with "channel list", as scanning doesn't create lists.

The channel list will mean when I scan satellite 13east there are about 1500 channels received,
If I scan any satellite after 13 East, all 1500 channels of 13 East disappear.
And the 1100 channels that have been in the receiver for a long time, 13 East, are displayed.



Re: channel list problem help #11 littlesat

  • PLi® Core member
  • 57057 berichten

+698
Excellent

Geplaatst op 26 december 2022 - 13:08

The services do not disappear… the last scan channels list is only overwritten by the new scan..

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: channel list problem help #12 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 26 december 2022 - 13:22

The services do not disappear… the last scan channels list is only overwritten by the new scan..

Can I watch those 1500 channels again,
Or I will have to do the last scan of 13 East



Re: channel list problem help #13 Abu Baniaz

  • PLi® Contributor
  • 2493 berichten

+64
Good

Geplaatst op 26 december 2022 - 13:43

The channels are on your receiver, you can watch them without rescanning.

For now, press up (next to OK), then green (satellites/orbital), select the satellite you want, then select the channel.

You will be better off creating your own bouquets /list with the channels you regularly watch.

Re: channel list problem help #14 WanWizard

  • PLi® Core member
  • 70204 berichten

+1798
Excellent

Geplaatst op 26 december 2022 - 14:53

If I scan any satellite after 13 East, all 1500 channels of 13 East disappear.

 

Disappear from where? We have no clue where you are looking.

 

The only bouquet scanned channels are added to is "Last scanned", which as the name implies get reset when you do a new scan.

 

Littlesat has already explained that.
 


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: channel list problem help #15 littlesat

  • PLi® Core member
  • 57057 berichten

+698
Excellent

Geplaatst op 26 december 2022 - 17:57

And to keep it you need to copy it and rename


Veranderd door littlesat, 26 december 2022 - 17:57

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: channel list problem help #16 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 27 december 2022 - 23:44

How are you making the channel list for 13e? Scanning adds channels /services to lamedb, it does not create a channel list(bouquet) apart from the last scanned. Last scanned bouquet is always a list of the last scanned channels. It will not contain previous scans.

If you don't know how to create bouquets/lists, just ask how to do it and people will help.

Are you sure that 13e channels are disappearing? Press up (next to OK) green for satellites/orbital position. They should be there.

If they are being removed, post a screenshot of the scan settings you are using. I wonder if you have selected clear before scan and that tuner physically! Hardware does not have 13e, but in software/config you have told the box there is.

Maybe record a video showing issue and upload it. You have been at this same problem for many months over a few forums. It would be nice to help you solve it.

Hi
Yes, how to make bouquets and lists.
It would be good if you tell them how.
good luck,



Re: channel list problem help #17 Abu Baniaz

  • PLi® Contributor
  • 2493 berichten

+64
Good

Geplaatst op 3 januari 2023 - 17:00

How do you want to do this?

 

1. Use remote

2. Use OpenWebif Bouquet Editor

3. Use a program like E-Chanenlizer, DreamboxEdit, Dreamset?



Re: channel list problem help #18 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 4 januari 2023 - 01:45

How do you want to do this?

 

1. Use remote

2. Use OpenWebif Bouquet Editor

3. Use a program like E-Chanenlizer, DreamboxEdit, Dreamset?

thanks



Re: channel list problem help #19 Abu Baniaz

  • PLi® Contributor
  • 2493 berichten

+64
Good

Geplaatst op 4 januari 2023 - 04:00

 

How do you want to do this?

 

1. Use remote

2. Use OpenWebif Bouquet Editor

3. Use a program like E-Chanenlizer, DreamboxEdit, Dreamset?

thanks

 

 

I asked you how you want to achieve what you want to do. Thanks is not a valid answer.



Re: channel list problem help #20 piplan1966

  • Senior Member
  • 281 berichten

+3
Neutral

Geplaatst op 4 januari 2023 - 06:09

sorry you are right
I have opened open webif with ip address,
And by clicking on the bouquet editor, a channel list of movies has been added and a favorite list of songs has been created.
I understand that,
Tell me more and I will try to understand.
good luck




0 gebruiker(s) lezen dit onderwerp

0 leden, 0 bezoekers, 0 anonieme gebruikers