Posted 29 January 2023 - 02:09
Hi guys i try to get life to my old Dreambox with OpenPli firmware ( OpenPLi-2.1-beta-dm800-20140510 ) i wonder if i can instal ( OSCAM ) and which version is compatible ?
I've tried with ( enigma2-plugin-softcams-doscam-0.25_openpli_all.ipk ) but i can't find it after install.
Thanks in advance with all help
Posted 29 January 2023 - 04:07
try oscam 11718
Posted 29 January 2023 - 12:17
In fact you can install any OScam you like.. But you’ll probably need some updated libraries as well. I would install OpenPli 4.0 on your box. Install OScam from the feed and - if necessary - update to a newer version.. OpenPli 4.0 is about the last you can install, newer versions are too big to fit in flash.
Posted 29 January 2023 - 13:52
In fact you can install any OScam you like.. But you’ll probably need some updated libraries as well. I would install OpenPli 4.0 on your box. Install OScam from the feed and - if necessary - update to a newer version.. OpenPli 4.0 is about the last you can install, newer versions are too big to fit in flash.
Thanks Mimisiku, i'm a ltle afraid because i can se that the firmware is for DM8000 ? ( openpli-4.0-workinglgtuner-dm8000-20160328.zip ) or am I misunderstanding you?
Posted 29 January 2023 - 14:35
I think that’s a typo… Report this to the team…
Posted 29 January 2023 - 16:16
I think that’s a typo… Report this to the team…
Thanks
Posted 31 January 2023 - 16:16
Hi guys i try to get life to my old Dreambox with OpenPli firmware ( OpenPLi-2.1-beta-dm800-20140510 ) i wonder if i can instal ( OSCAM ) and which version is compatible ?
I've tried with ( enigma2-plugin-softcams-doscam-0.25_openpli_all.ipk ) but i can't find it after install.
Thanks in advance with all help
Make 2 symlinks.
Octagon SF8008 / TBS5530 DVB-S2/T2 T-85/1.50Mtr/3x90cm (53e 52e 51,5e 28e 25,9e 23e 19e 13e 9e 4e 1w 5w 14w)
Posted 31 January 2023 - 16:27
And never listen to idiots like mimisiku for Dreambox advice, takes alot of work..
Can you elaborate on this bold remark? Apart from being rude with this remark I always help people with their boxes… I’ve also sent a report to the moderator…
Posted 31 January 2023 - 21:29
Hi
I request all members,
Always write good words so that the reader feels happy.
show no one's heart,
Allah does not like those who hurt the heart.
Posted 31 January 2023 - 21:44
And never listen to idiots like mimisiku for Dreambox advice, takes alot of work..
No need being so abusive toward a fellow board member which is always willing to offer help.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 3 February 2023 - 22:59
Hi again is there someone as can tell me if i can use the folow firmware on my old original " DM800 HD PVR "
[IMAGE] DM800HD : OpenPLi 7.3Star 20200924 GSt 1.17.0.1 (v6)
Thanks in advance for all help
Posted 5 February 2023 - 11:08
Check if it supports the original DM800-PVR. Many times the same firmware is build for both the original and clones. If you flash the wrong version you end up with ‘R 01 - no CA’.
Just checked. It’s from Japhar Team so most probable only for SIM 2.1 clones.
Why not buy a new box? For €79 you can have a modern box which is faster, has more flash. The DM800-PVR is soooooo old..
Edited by mimisiku, 5 February 2023 - 11:11.
Posted 5 February 2023 - 13:57
Thats right , thats too old and i've an VU+ but i wanna get it to work on my other room in an extra TV. I know that there is a firmware OpenPli that works with Oscam, but I don't know which one.
Posted 5 February 2023 - 14:48
I have numerous old files for this DM800-PVR. Owned it from 2006 and it’s still working if I power it on. It’s in the ‘old-relic’ cupboard where all my old devices are stored…. I have to check my archives…
B797BF02-7E73-4106-9309-3F330BCCB047.png 118.96KB
3 downloads
Edited by mimisiku, 5 February 2023 - 14:52.
Posted 5 February 2023 - 17:13
Thanks mimisiku for your help, the problem is that 'm still a newbie in this area, and don't know which firmware to use.
I know DM has a sim A4P and it says it's original .
Posted 9 February 2023 - 12:44
I have numerous old files for this DM800-PVR. Owned it from 2006 and it’s still working if I power it on. It’s in the ‘old-relic’ cupboard where all my old devices are stored…. I have to check my archives…
Thanks mimisiku, i've sent you an PM.
Posted 31 August 2023 - 13:31
In fact you can install any OScam you like.. But you’ll probably need some updated libraries as well. I would install OpenPli 4.0 on your box. Install OScam from the feed and - if necessary - update to a newer version.. OpenPli 4.0 is about the last you can install, newer versions are too big to fit in flash.
Thanks Mimisiku, i'm a ltle afraid because i can se that the firmware is for DM8000 ? ( openpli-4.0-workinglgtuner-dm8000-20160328.zip ) or am I misunderstanding you?
I get this result from DreamUp, so I gues it's not for DM800.
DreamUp.png 22.34KB
2 downloads
Edited by Alex_NL, 31 August 2023 - 13:32.
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Posted 31 August 2023 - 16:28
Al beantwoord op ‘dat andere populaire forum’.
0 members, 2 guests, 0 anonymous users
