hello
I have usb dvb t2 rtl2832 astrometa.
i have install driver from feeds rtl2832
and Panasonic firmware with this command
cd /lib/firmware wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88473/01/latest/dvb-demod-mn88473-01.fw
I have a signal on the sat finder but it appears and disappears every second
and it doesn't find any channels in the scan
i test all image with same problem signal it appears and disappears every second
openpli 8.3
openpli7.3
openatv 7.2
openatv 6.4
openbh 5.1
in my country at the moment it has dvb-t
I have seen this topic and trio4k have same hardware with Uclan Ustym 4k pro and sf 8008
if it possible somebody help me
dmesg
Load hi_vi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:55]) Load hi_pmoc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Sep 6 2019, 10:59:26]) Registered IR keymap rc-hi3798 input: dreambox advanced remote control as /devices/virtual/rc/rc0/input0 rc0: dreambox advanced remote control as /devices/virtual/rc/rc0 hisi KEYS Driver, (c) 2017 Define Technologies input: Hisi Front Panel Button Controls as /devices/platform/hisi_keys/input/input1 hisi encoder Driver, (c) 2017 Define Technologies udevd[1249]: starting version 3.2.8 udevd[1250]: starting eudev-3.2.8 ahci: probe of f9900000.hiahci failed with error -1 usb 1-1.2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state [00:00:06:442 ERROR-HI_AO]:AO_SND_SetVolume[1284]:NULL pointer usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Astrometa DVB-T2) i2c i2c-3: Added multiplexed i2c bus 4 rtl2832 3-0010: Realtek RTL2832 successfully attached DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... r820t 4-003a: creating new instance r820t 4-003a: Rafael Micro r820t successfully identified Registered IR keymap rc-empty input: Astrometa DVB-T2 as /devices/platform/soc/f9890000.ehci/usb1/1-1/1-1.2/rc/rc1/input2 rc1: Astrometa DVB-T2 as /devices/platform/soc/f9890000.ehci/usb1/1-1/1-1.2/rc/rc1 input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input3 usb 1-1.2: dvb_usb_v2: schedule remote query interval to 200 msecs usb 1-1.2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected usbcore: registered new interface driver dvb_usb_rtl28xxu dvb video add event 17 - 7 0 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [00:00:08:268 ERROR-HI_PM]:c51_GetWakeUpMode[1297]: wakeup mode err! proc_vmpeg_0_dst_apply_write 1 EXT4-fs (mmcblk0p16): re-mounted. Opts: (null) [iframe_confirm:190] iframe confirm video[0] ready to play [iframe_finish:208] iframe finish dvb video add event 17 - 7 0 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready hi_gmac_v200 f9840000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [iframe_confirm:190] iframe confirm video[0] ready to play [iframe_finish:208] iframe finish [00:00:21:708 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 0 Failed dvb video add event 17 - 7 0 vtunerc0: setting DVB-T tuner vtype vtunerc0: frontend initialized as type=4 DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... vtunerc0: usb frontend initialized as type=4 DVB: registering adapter 0 frontend 0 (dvbt2)... OPS_si2166_init @RDA5815M_Initialize api->spi_download 0 Build Option: Si2183_B60_COMPATIBLE Si2166-D60 Part running 'FW_6_1b4' @si2166_i2c_gate_ctrl @si2166_i2c_gate_ctrl @OPS diseqc tone = 0(22K-OFF) @si2166_diseqc_set_voltage OFF @OPS diseqc tone = 0(22K-OFF) @si2166_diseqc_set_voltage OFF proc_vmpeg_0_dst_apply_write 00000001 (VIC)63 (VIC)64 stStdTiming[h:1152, v:864] stStdTiming[h:1280, v:720] stStdTiming[h:1280, v:800] stStdTiming[h:1280, v:1024] stStdTiming[h:1440, v:900] stStdTiming[h:1600, v:900] stStdTiming[h:1680, v:1050] stStdTiming[h:1920, v:1080] (VIC)63 (VIC)64 stStdTiming[h:1152, v:864] stStdTiming[h:1280, v:720] stStdTiming[h:1280, v:800] stStdTiming[h:1280, v:1024] stStdTiming[h:1440, v:900] stStdTiming[h:1600, v:900] stStdTiming[h:1680, v:1050] stStdTiming[h:1920, v:1080] (VIC)63 (VIC)64 stStdTiming[h:1152, v:864] stStdTiming[h:1280, v:720] stStdTiming[h:1280, v:800] stStdTiming[h:1280, v:1024] stStdTiming[h:1440, v:900] stStdTiming[h:1600, v:900] stStdTiming[h:1680, v:1050] stStdTiming[h:1920, v:1080] FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. proc_vmpeg_0_dst_apply_write 1 proc_vmpeg_0_dst_apply_write 1 bestfit wol off(VIC)63 (VIC)64 stStdTiming[h:1152, v:864] stStdTiming[h:1280, v:720] stStdTiming[h:1280, v:800] stStdTiming[h:1280, v:1024] stStdTiming[h:1440, v:900] stStdTiming[h:1600, v:900] stStdTiming[h:1680, v:1050] stStdTiming[h:1920, v:1080] (VIC)63 (VIC)64 stStdTiming[h:1152, v:864] stStdTiming[h:1280, v:720] stStdTiming[h:1280, v:800] stStdTiming[h:1280, v:1024] stStdTiming[h:1440, v:900] stStdTiming[h:1600, v:900] stStdTiming[h:1680, v:1050] stStdTiming[h:1920, v:1080] (VIC)63 (VIC)64 stStdTiming[h:1152, v:864] stStdTiming[h:1280, v:720] stStdTiming[h:1280, v:800] stStdTiming[h:1280, v:1024] stStdTiming[h:1440, v:900] stStdTiming[h:1600, v:900] stStdTiming[h:1680, v:1050] stStdTiming[h:1920, v:1080] auto auto auto auto proc_video_videomode_50hz_write [2160p50] proc_video_videomode_60hz_write [2160p50] proc_video_videomode_24hz_write [2160p50] auto hi_dvb_set_source [dmx: 0, tuner: 1, isvtuner: 0] [hi_dvb_attach_tsport:740 dmx 0,port 33]0 5 1 0 184 demodid = 0,i2c = 1,freq=482000000 band=8000000,stream pid = -1 ******************************************VIDEO_GET_FRAME_RATE 0 DmxPcrAcquire 0 -1073060340 Enter DMX_OsiPcrChannelAttachSync 0 0 4325376 audio[0] ready to play Enter DMX_OsiPcrChannelDetachSync 0 0 DmxPcrAcquire 0 -1073060340 Enter DMX_OsiPcrChannelAttachSync 0 0 4325376 video[0] ready to play dvb video add event 1 - 0 0 1920 1080 dvb video add event 2 - 0 0 30 0 dvb video add event 16 - 0 1 dvb video add event 17 - 7 0 [16:48:27:217 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 1 Failed dvb video add event 16 - 1 0 dvb video add event 2 - 30 0 25 0 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 Enter DMX_OsiPcrChannelDetachSync 0 0 hi_dvb_set_source [dmx: 0, tuner: 2, isvtuner: 1] hi_dvb_set_source [ctx-id: 0, ctx-name: dvbt2] [16:49:09:954 ERROR-HI_DEMUX]:HI_DVB_DMX_GetTSBufferHandle[1515]:TS Buffer not created found RAM ts port 128 proc_vmpeg_0_dst_apply_write 00000001 off lnb power off vtunerc0: allocated buffer of 188 bytes proc_vmpeg_0_dst_apply_write 00000001 hi_dvb_set_source [dmx: 0, tuner: 1, isvtuner: 0] [hi_dvb_attach_tsport:740 dmx 0,port 33]0 5 1 0 184 proc_vmpeg_0_dst_apply_write 00000001 demodid = 0,i2c = 1,freq=482000000 band=8000000,stream pid = -1 ******************************************VIDEO_GET_FRAME_RATE 0 DmxPcrAcquire 0 -1073060340 Enter DMX_OsiPcrChannelAttachSync 0 0 4325376 audio[0] ready to play Enter DMX_OsiPcrChannelDetachSync 0 0 DmxPcrAcquire 0 -1073060340 Enter DMX_OsiPcrChannelAttachSync 0 0 4325376 proc_vmpeg_0_dst_apply_write 00000001 video[0] ready to play [16:57:43:218 ERROR-HI_DEMUX]:DMX_OsiReleaseReadData[11989]:channel 2 is not open yet or not play channel [16:57:43:227 ERROR-HI_DEMUX]:DmxSharedChanCbFunc[560]:release cb data failed(0x80150018). proc_vmpeg_0_dst_apply_write 00000001 dvb video add event 17 - 7 0 proc_vmpeg_0_dst_apply_write 00000001 [16:57:44:177 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 1017 Failed dvb video add event 1 - 0 0 1920 1080 dvb video add event 2 - 0 0 25 0 proc_vmpeg_0_dst_apply_write 00000001 proc_vmpeg_0_dst_apply_write 00000001 root@gbtrio4k:~#
.
