Posted 5 March 2023 - 16:28
4CC2BD57-08B2-41BD-BC65-1990212A5620.jpeg 125.96KB
6 downloads
7ECF3C9F-06F4-4261-BFF2-743D10A4DF97.jpeg 200.33KB
5 downloads
Edited by SK8PT, 5 March 2023 - 16:29.
Posted 20 March 2023 - 01:37
Hi,
Any update? Its a bug?
Staff can check?
Thanks.
Posted 20 March 2023 - 13:33
I don't have one, but I've never seen anyone complain about this.
Posted 20 March 2023 - 14:17
Just checked. No problem noticed as expected. Check the image and / or your TV.
h8.2h_1.PNG 559.66KB
1 downloads
h8.2h_2.PNG 340.2KB
0 downloads
h8.2h_3.PNG 509.93KB
0 downloads
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 20 March 2023 - 19:59
Hello! I have 3pcs of Zgemma H8.2 , All of them have buggy picture in 1080P ... So you are not alone!
if you "plays" with the remote control, Take up the channel list fast, and close it fast.. and takes it up fasat again, and so on, You can see a "ghost image" on the screen for about 0.5 seconds in the middle of screen / bottom of screen (i think...), :=) -- Some times.. Its good... I have also try different TV's, HDMI Cables, and so on, but its the same with them all , 1080I seems to work also 720P
And I have notices thats it have to be a SD channel its almost happens, but some times it also happens on HD channels ..?? 
I Have not seen this errors you uploaded pictures on! , I Checked again, and they are not there for me
Edited by Grippen, 20 March 2023 - 20:04.
Posted 27 March 2023 - 11:59
Just checked. No problem noticed as expected. Check the image and / or your TV.
Hello.
I just test on 6 different Zgemma H8.2H, every single one box do the same buggy image. Maybe is something with the language selected? (In my case Portuguese).
With other system images that bug image don't happen.
I also found other people on the internet with same problem.
Which version of OpenPLI you are using?
Thanks.
Edited by SK8PT, 27 March 2023 - 12:01.
Posted 27 March 2023 - 12:00
Hello! I have 3pcs of Zgemma H8.2 , All of them have buggy picture in 1080P ... So you are not alone!
if you "plays" with the remote control, Take up the channel list fast, and close it fast.. and takes it up fasat again, and so on, You can see a "ghost image" on the screen for about 0.5 seconds in the middle of screen / bottom of screen (i think...), :=) -- Some times.. Its good... I have also try different TV's, HDMI Cables, and so on, but its the same with them all , 1080I seems to work also 720P
And I have notices thats it have to be a SD channel its almost happens, but some times it also happens on HD channels ..??
I Have not seen this errors you uploaded pictures on! , I Checked again, and they are not there for me
Hi,
Yes, when select 1080P I can't see all options on the screen, already tried change tv, cables, etc...
So its a bug from OpenPLI.
Thanks.
Posted 27 March 2023 - 19:21
I tested with the Release 8.3 and the NB.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 8 May 2023 - 13:40
I tested with the Release 8.3 and the NB.
Hi, I will test today.
Posted 10 July 2023 - 16:09
Hi, I test again and same problem.. Select 1080P, hz: auto when overscan wizard the problem persists.
Video of the problem: https://streamable.com/yisnm7
Posted 13 August 2023 - 18:02
Just checked. No problem noticed as expected. Check the image and / or your TV.
Hello.
I just test on 6 different Zgemma H8.2H, every single one box do the same buggy image. Maybe is something with the language selected? (In my case Portuguese).
With other system images that bug image don't happen.
I also found other people on the internet with same problem.
Which version of OpenPLI you are using?
Thanks.
I have one also. and I have no issue with the 1080p. I'm with Portuguese also.
Maybe you need to run an update to the OS.
MifPT
Posted 14 August 2023 - 07:50
Hi,
did you check the specs of your TV. To display 1080p at least 3 parties are involved. Also important if the service provides 1080@25 or 1080@30.
Ralf
Posted 23 August 2023 - 17:51
Hi,
did you check the specs of your TV. To display 1080p at least 3 parties are involved. Also important if the service provides 1080@25 or 1080@30.
Ralf
I already install 9 zgemma h8.2h all with the same problem. And tested more than 10 TV's.. Smart TV, QLED 4K, 2023 tvs.. etc..
Posted 24 August 2023 - 09:53
Did you try to fix the setting in the A/V menu for example set the frequency to 50Hz and not in auto? Same for resolution.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 25 September 2023 - 10:29
Did you try to fix the setting in the A/V menu for example set the frequency to 50Hz and not in auto? Same for resolution.
Yes I do, same problem. More than 9 boxs already tested.
Edited by SK8PT, 25 September 2023 - 10:30.
0 members, 1 guests, 0 anonymous users
