15 replies to this topic

[Guest-*0823016*]

The tuner turbo had some problems for some time and I fixed it with a USB that I had.
With the turbo setting SNR in the infobar it gives me the correct percentage while the A867 always shows me 100% on all digital terrestrial channels, if instead I set db it marks me correctly the signal why? (by inserting the A867 and restarting it automatically got the driver)  1.jpg   32.6KB   2 downloads  1.1.jpg   13.62KB   2 downloads  2.jpg   5.99KB   2 downloads  3.jpg   6.99KB   2 downloads

Inviato dal mio RMX3521 utilizzando Tapatalk

[Dimitrij]

Problem in USB driver.

Some box, e.g. Xtrend it work correctly.

Not fix easy.

[Guest-*0823016*]

Problem in USB driver.
Some box, e.g. Xtrend it work correctly.
Not fix easy.

I doubt that the correct driver could be af9035

krime mobile

[Dimitrij]

Exactly, I remember.

SNR has always been 100% on the Xtrend. Now VU+ is always 0%.

af9015-output-full-range-SNR.patch

Edited by Dimitrij, 12 March 2023 - 08:29.

[Guest-*0823016*]

Exactly, I remember.
SNR has always been 100% on the Xtrend. Now VU+ is always 0%.
af9015-output-full-range-SNR.patch

So nothing to do?

krime mobile

[Dimitrij]

Need add this patch in VU+ linux.

[Guest-*0823016*]

Need add this patch in VU+ linux.

Let's do it.

krime mobile

[rantanplan]

You are comparing a patch for Linux Kernel 3 with a Linux Kernel 4.

Apart from that, the display of the data does not change the functionality.
There are tuners that show you 100% and you have no picture.
Unfortunately, this data is just a gimmick.

[Guest-*0823016*]

You are comparing a patch for Linux Kernel 3 with a Linux Kernel 4.

Apart from that, the display of the data does not change the functionality.
There are tuners that show you 100% and you have no picture.
Unfortunately, this data is just a gimmick.

There is a big difference between 3 and 4. In my case I'm lucky you can all see them and they all have the same percentage.

krime mobile

[Guest-*0823016*]

Problem in USB driver.
Some box, e.g. Xtrend it work correctly.
Not fix easy.

I doubt that the correct driver could be af9035

krime mobile

I just did a test with OBH. In theirs the % signal is correctly signaled But... with the same USB the correct driver is 9035 and the 9015 doesn't work at all, unlike the PLi which mounts the 9015! , but even putting 9035 you don't get the same result. I took a picture (Jepssen) and mounted the 9035 and it read everything correctly. I can bring evidence that the driver is that. Available. (the OBH is UNWATCHABLE for menus and skins but in the context it is very reactive!)

krime mobile

[Dimitrij]

meta-oe/recipes-oe-alliance/enigma2-dvb-drivers/enigma2-plugin-drivers-dvb-usb-af9035.bb

 

meta-openpli/recipes-openpli/enigma2-dvb-drivers/enigma2-plugin-drivers-dvb-usb-af9035.bb

 

 

meta-oe/recipes-oe-alliance/enigma2-dvb-drivers/enigma2-plugin-drivers-dvb-usb-a867.bb

Edited by Dimitrij, 17 March 2023 - 06:25.

[Guest-*0823016*]

So?


krime mobile

[Dimitrij]

SUMMARY = "USB DVB driver for Afatech 867 chipset"
inherit allarch

require conf/license/license-gplv2.inc

DVBPROVIDER ?= "kernel"

RRECOMMENDS:${PN} = " \
    ${DVBPROVIDER}-module-dvb-usb-a867 \
    firmware-dvb-usb-af9035-02 \
    "

PV = "1.0"
PR = "r0"

ALLOW_EMPTY:${PN} = "1"

This drivers?

[Guest-*0823016*]

SUMMARY = "USB DVB driver for Afatech 867 chipset"
inherit allarch

require conf/license/license-gplv2.inc

DVBPROVIDER ?= "kernel"

RRECOMMENDS:${PN} = " \
    ${DVBPROVIDER}-module-dvb-usb-a867 \
    firmware-dvb-usb-af9035-02 \
    "

PV = "1.0"
PR = "r0"

ALLOW_EMPTY:${PN} = "1"

This drivers?

 

Yes

[Guest-*0823016*]

opkg install kernel-module-dvb-usb-af9035

opkg install firmware-dvb-usb-af9035-02

Attached Files

•  AF9035(A867).pdf   316.85KB   2 downloads
•  Avermedia-a867.jpg   94.94KB   2 downloads
•  af9035B.jpg   74.24KB   2 downloads

[Guest-*0823016*]

krime mobile