81 replies to this topic

[paneologist]

Hello,

I got a VU+ Turbo SE stick and can't get it to work on my VU+ Duo 4K SE with my up-to-date OpenPLI (release version).

 

it shows under lsusb:

Bus 004 Device 002: ID 0572:0320 Conexant Systems (Rockwell), Inc. DVBSky T330 DVB-T2/C tuner

 

and I installed enigma2-plugin-drivers-s2-usb-dvbsky-s960 - 1.0-r0.5 -  showing up under lsmod:

dvb_usb_dvbsky          7610  0
dvb_usb_v2             21125  1 dvb_usb_dvbsky

but under the menu setup->tuner & scanning->tuner configuration it is not shown.

 

am I missing something?

 

thank you

[mimisiku]

Have the same USB device. Never got it to work with OpenPli. The firmware is not available. Even with VTi this stick didn’t work (got recognised though). Even with disabling the internal DVB-C tuner in VTi it didn’t scan anything! Tried for a few months and then trew it in the bin. €60 down the drain… Completely and utterly unusable…..

 

I also remember that it required kernel 3.15+

 

The driver should be DVB T330

Edited by mimisiku, 2 August 2023 - 11:53.

[mimisiku]

I have tried one on a GigaBlue Trio 4K using OpenPli 8.3. Installed driver DVBsky-T330 and rebooted the box. Got into Tuner and enabled tuner C. After another reboot the box actually DID work! This box has kernel 4.4. Even encrypted channels worked.
Perhaps mine was DOA from the beginning who knows

[Dimitrij]

Added drivers required for the VU+ Turbo SE Combo USB tuner

[paneologist]

Added drivers required for the VU+ Turbo SE Combo USB tuner

where does that code/support sit in?

[Dimitrij]

 

where does that code/support sit in?

Develop image

[mimisiku]

It is in the drivers section of the feed…If your Duo4K has a suitable kernel this should work..

 

Attached Files

•  IMG_2292.jpeg   102.08KB   4 downloads

[paneologist]

 

 

where does that code/support sit in?

Develop image

 

any idea, when it may be released?

I want to keep the release version... for stability.
is it possible to just the ipk.deb package containing the change?

It is in the drivers section of the feed…If your Duo4K has a suitable kernel this should work..

should, but doesn't :-( (Kernel / Drivers:  4.1.45 / 20210527)

[WanWizard]

The upcoming 9.0-release will be the same as the current develop, so in terms of stability there is no difference. You can always flash the release when it becomes available.

[mimisiku]

It should though. If kernel is higher than 3.15. Old VU+Ultimo4K won’t (kernel lower). The Duo4K is 4.1 so kernel-wise no problem

[paneologist]

I am now using the develop image.

still no tuner to find?!

also can't find enigma2-plugin-drivers-s2-usb-dvbsky-s960

 

tried enigma2-plugin-drivers-dvb-usb-turbo2 and enigma2-plugin-drivers-dvb-usb-turbo without success

what do I miss this time?

[mimisiku]

You missed my post! It’s the DVB-Sky 330 driver you need..

Edited by mimisiku, 14 August 2023 - 15:40.

[paneologist]

You missed my post! It’s the DVB-Sky 330 driver you need..

indeed

where can I find it?
 

opkg list | grep -i 330
kernel-module-lgdt3305-4.1.45-1.17 - 4.1.45-r0.1.3.2 - lgdt3305 kernel module
kernel-module-lgdt3306a-4.1.45-1.17 - 4.1.45-r0.1.3.2 - lgdt3306a kernel module
kernel-module-lgdt330x-4.1.45-1.17 - 4.1.45-r0.1.3.2 - lgdt330x kernel module
tuxbox-common - 3+git530+7833304-r0.0 - tuxbox-common version 3+gitAUTOINC+783330436e-r0
tuxbox-common-dbg - 3+git530+7833304-r0.0 - tuxbox-common version 3+gitAUTOINC+783330436e-r0 - Debugging files
tuxbox-common-dev - 3+git530+7833304-r0.0 - tuxbox-common version 3+gitAUTOINC+783330436e-r0 - Development files

 

[mimisiku]

Simple! In the official feed…..

[paneologist]

Simple! In the official feed…..

ok? you mean in the stable release?

on develop I see that:

 

# opkg update
Downloading http://downloads.ope...eon/Packages.gz.
Updated source 'openpli-3rd-party-armv7ahf-neon'.
Downloading http://downloads.ope...rty/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.ope...kse/Packages.gz.
Updated source 'openpli-3rd-party-vuduo4kse'.
Downloading http://downloads.ope...all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.ope...eon/Packages.gz.
Updated source 'openpli-armv7ahf-neon'.
Downloading http://downloads.ope...ons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.ope...kse/Packages.gz.
Updated source 'openpli-vuduo4kse'.
root@stb1:~# opkg list | grep -i sky
enigma2-plugin-drivers-dvb-usb-technisat-skystar - 1.0-r0.1 - enigma2-plugin-drivers-dvb-usb-technisat-skystar version 1.0-r0
firmware-dvb-usb-technisat-skystar - 1.1+git296+4b2b151-r0.6 - firmware-dvb-usb-technisat-skystar version 1.1+gitAUTOINC+4b2b151e18-r0

[mimisiku]

If you can’t read (or won’t) I can’t help you. DVBSKY-T330! Is that so hard to read??
And another thing: Throwing every (wrong) driver in your box doesn’t help either…

[WanWizard]

That a kernel driver is in the feed for one particular box doesn't say anything about other boxes.

 

It needs to be supported by the kernel version, and if so, it needs to be enabled in the BSP's kernel defconfig. And then it needs to be enabled in the build.

 

If I look in the feeds for 8.3-release, I see

./gbtrio4k/enigma2-plugin-drivers-ct2-usb-dvbsky-t330_1.0-r0.3_gbtrio4k.ipk
./gbtrio4k/enigma2-plugin-drivers-dvb-usb-technisat-skystar_1.0-r0.4_gbtrio4k.ipk
./gbtrio4k/enigma2-plugin-drivers-s2-usb-dvbsky-s960_1.0-r0.3_gbtrio4k.ipk
./gbtrio4k/kernel-module-dvb-usb-dvbsky-4.4.35_4.4.35-.7.9_gbtrio4k.ipk

but for the same box in develop

./gbtrio4k/enigma2-plugin-drivers-dvb-usb-technisat-skystar_1.0-r0.8_gbtrio4k.ipk
./gbtrio4k/kernel-module-dvb-usb-dvbsky-4.4.35_4.4.35-.7.7_gbtrio4k.ipk

according to the build config, it should be build for all kernels > 3.19

meta-openpli/recipes-openpli/enigma2-dvb-drivers/dvb-usb-drivers-meta.bb:	${@ 'enigma2-plugin-drivers-ct2-usb-dvbsky-t330' if ("${KERNEL_VERSION}" and bb.utils.vercmp_string("${KERNEL_VERSION}", '3.19') > 0) else '' } \

but appearently that doesn't happen (anymore)?

[paneologist]

If you can’t read (or won’t) I can’t help you. DVBSKY-T330! Is that so hard to read??
And another thing: Throwing every (wrong) driver in your box doesn’t help either…

I read and understood and thankfull for your help. I unfortunately missed it before I installed the development image.
Just wrote, that I am unable to find any such driver using the nightly build. Neither on console nor using GUI:

 1_0_A_28A4_40F_1_C00000_0_0_0_20230814180007.jpg   104.72KB   0 downloads

That's why I tried to ask kindly, if it's possible, that this driver is only available for the stable/release version - as I don't know how to look in those feeds directly. accessing http://downloads.openpli.org/feeds/ gives just "Forbidden".

[WanWizard]

There is a build issue, so at the moment nothing much you can do. Looking into it.

[WanWizard]

Think I've found the issue, it should be in the develop feed after the current build run is finished.