Heute wurde der offizielle Release Candidate des 9.0 Images veröffentlicht. Für diejenigen, die noch nie ein Nightly Build getestet haben, weil sie Angst hatten, ist jetzt die Gelegenheit, diesen RC zu testen. Über Kommentare/Beobachtungen freuen wir uns. Und natürlich sind auch positive Kommentare gerne gesehen.
Das erste 9.0 Release Candidate Image ist online seit Heute.
Started by Frenske, 16 Aug 2023 15:19
50 replies to this topic
#1
-
- Forum Moderator
PLi® Core member - 27,428 posts
+396
Excellent
Posted 16 August 2023 - 15:19
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #2
-
- New Member
- 2 posts
+1
Neutral
Posted 16 August 2023 - 18:51
Genau zur richtigen Zeit erschienen, war schon ein paar Tage auf der Suche nach einem py3 Image, das auch läuft, OpenATV läuft leider nicht gut auf meiner VU+ Duo 4k.
Was soll ich sagen, installiert, Sendeliste per Dreambox edit drauf geschoben, oscam installiert, FCC aktiviert, was soll ich sagen läuft bis jetzt ohne Probleme.
Super Arbeit, Danke �
Was soll ich sagen, installiert, Sendeliste per Dreambox edit drauf geschoben, oscam installiert, FCC aktiviert, was soll ich sagen läuft bis jetzt ohne Probleme.
Super Arbeit, Danke �
Edited by Ceulem, 16 August 2023 - 18:52.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #3
-
- Senior Member
- 37 posts
0
Neutral
Posted 19 August 2023 - 10:13
Gestern spät abends ein drei Tage altes RC 9.0 runtergeholt und auf dem Duo 4K installiert. Dauerte etwas lange und bin eingeschlafen
Zwei Stunden später erwache ich und der Schirm ist dunkelblau, Image RC 9.0 ist installiert
Und dann, die grosse Überraschung; alles ist intakt; die Settings, Kanalliste etc etc..
Es blieb nur noch eine Kleinigkeit zu machen, nämlich der oscam-emu Restart ♂
Heute morgen machte ich ein Update, ich holte die neueste Version runter. Auch das ging wie geschmiert
Momentan mache ich zwei Aufnahmen:
- SRF 2 Viaccess (oscam-emu)
- NRK1 Conax (Common Interface)
Bis vor vielleicht 3-4 Jahren entschlüsselte das "oscam-emu" sowohl Viaccess wie auch Conax Kanäle. Gibt es irgendwo eine neues/anderes Softcam, das beide Systeme dekodieren kann?
Danke
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #4
-
- Senior Member
- 71 posts
0
Neutral
Posted 19 August 2023 - 11:28
Hallo... enigma2-plugin-weather_c1.1_all.ipk Is deze ook voor py3 ? weil msn wieder funktioniert, aber mit pli 8.3 nicht rc 9.0 möglich, bitte ändern
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #5
-
- Senior Member
- 80 posts
0
Neutral
Posted 21 August 2023 - 16:58
was genau wurde neu gemacht und welche änderungen gibt es ?
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #6
-
- Forum Moderator
PLi® Core member - 27,428 posts
+396
Excellent
Posted 22 August 2023 - 18:42
Die Release Notes werden erst beim Release 9.0 veröffentlicht.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #7
-
- Senior Member
- 80 posts
0
Neutral
Posted 23 August 2023 - 00:19
ALso auf meinem vu+ duo4k installiert lief reibungslos nur die ipk XtreamTV ist nicht vorhanden bzw kann es nicht sehen unter plugins steht xtreamtv no moduled name
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #8
-
- Member
- 21 posts
+1
Neutral
Posted 23 August 2023 - 16:38
Ich habe von 8.3 auf 9 RC ein Update gemacht und mein Backup zurück gespielt. Soweit läuft auch alles aber einige Phyton Sachen konnten nicht zurück gespielt werden die ich für meine USB Easymouse brauche daher geht auch die ORF Karte nicht. Was kann ich machen? Habe eine UNO 4K SE.
Edited by Schrotty74, 23 August 2023 - 16:39.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #9
-
- Forum Moderator
PLi® Core member - 27,428 posts
+396
Excellent
Posted 24 August 2023 - 11:39
Wenn du die bestimmte ‚Python Sachen‘ hier mal erwähntest, dann könnten wir vielleicht da etwas ändern um dies zu lösen.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #10
-
- Senior Member
- 80 posts
0
Neutral
Posted 30 August 2023 - 21:31
braucht ihr was für das XtreamTV plugin, denn das geht nicht mit dem neuen image...
Edited by ibo_36, 30 August 2023 - 21:32.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #11
-
- PLi® Contributor
- 1,828 posts
+83
Good
Posted 30 August 2023 - 22:38
braucht ihr was für das XtreamTV plugin, denn das geht nicht mit dem neuen image...
Du redest echt in Rätseln.
"Wir" brauchen das nicht, du hast irgendein Plugin und kannst es nicht unter python3 verwenden.
Also entweder das Plugin wird Python3 tauglich gemacht, oder du wechselst auf ein anderes ähnliches Plugin, welches bereits Python3 tauglich ist.
Grüße
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #12
-
- Senior Member
- 314 posts
0
Neutral
Posted 31 August 2023 - 07:12
Ich fürchte, das Systemplugin vps funktioniert nicht korrekt mit RC 9.0!
Wenn ich einen Timer für die öffentlich rechtlichen Sender programmiere und aktiviere darin VPS ohne Sicherheitsmodus, wird die Aufnahme trotzdem mit dem hinterlegten Vor- und Nachlauf aufgenommen.
Ich hänge mal ein Debuglog an.
Vielleicht kann das Problem hierüber gefunden werden.
[Avahi] avahi_timeout_new
[Avahi] avahi_watch_new(3 0x1)
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] client state: 2
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
[eInit] + (9) Font Render Class
[Font] Initializing lib.
[Font] Loading fonts.
[Font] Intializing font cache, using max. 4MB.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 11
ENIGMA_DEBUG_LVL=4
[eInit] + (9) gLCD
[eFbLCD] /dev/fb1: No such file or directory
[eFbLCD] framebuffer /dev/fb1 not available
[eDboxLCD] xres=400, yres=240, bpp=32 lcd_type=3
[eLCD] (400x240x32) buffer 0xb58e2008 384000 bytes, stride 1600
[gLCDDC] resolution: 400x240x32 stride=1600
[eInit] + (9) GFBDC
[fb] /dev/fb0: 21600k video mem
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 5400kB available for acceleration surfaces.
[eInit] + (10) gRC
[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) AVSwitch Driver
[eInit] + (20) misc options
[eInit] + (20) RC Input layer
[eInit] + (20) UHF Modulator
[eRFmod] couldnt open /dev/rfmod0: No such file or directory
[eInit] + (20) DVB-CI UI
[eInit] + (21) input device driver
[eInputDeviceInit] adding device /dev/input/event0
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
[eInputDeviceInit] Found 1 input devices.
[eInit] + (22) Hdmi CEC driver
[eHdmiCEC] detected physical address change: 1000 --> 2000
[eHdmiCEC] send message 84 20 00 03
[eInit] + (30) eActionMap
[eInit] + (35) CA handler
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] Slot: 0 setSource: A
[CI] Slot: 1 setSource: A
[CI] eDVBCIInterfaces setInputSource(0, A)
[CI] eDVBCIInterfaces setInputSource(1, B)
[CI] eDVBCIInterfaces setInputSource(2, C)
[CI] eDVBCIInterfaces setInputSource(3, D)
[CI] eDVBCIInterfaces setInputSource(4, E)
[CI] eDVBCIInterfaces setInputSource(5, F)
[CI] eDVBCIInterfaces setInputSource(6, G)
[CI] eDVBCIInterfaces setInputSource(7, H)
[CI] eDVBCIInterfaces setInputSource(8, I)
[CI] eDVBCIInterfaces setInputSource(9, J)
[CI] eDVBCIInterfaces setInputSource(10, K)
[CI] eDVBCIInterfaces setInputSource(11, L)
[CI] done, found 2 common interface slots
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[eInit] + (41) Stream server
[Avahi] AvahiServiceEntry (null) (_e2stream._tcp) 8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vuuno4kse (_e2stream._tcp) on vuuno4kse:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vuuno4kse (_e2stream._tcp) on vuuno4kse:8001
[eInit] + (41) Encoders
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryTS
[eInit] + (41) eServiceFactoryWebTS
[eInit] + (41) eServiceFactoryDVD
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)
[eDVBDB] loaded 96 channels/transponders and 1324 services
eDVBSatelliteEquipmentControl::clear()
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend0] opening frontend
[eDVBFrontend0] opening frontend
[eDVBFrontend0] frontend 0 has DVB API 50a
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] opening frontend
[eDVBFrontend1] opening frontend
[eDVBFrontend1] frontend 1 has DVB API 50a
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] close frontend
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] opening frontend
[eDVBFrontend2] opening frontend
[eDVBFrontend2] frontend 2 has DVB API 50a
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] close frontend
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend3] opening frontend
[eDVBFrontend3] opening frontend
[eDVBFrontend3] frontend 3 has DVB API 50a
[eDVBFrontend3] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend3] close frontend
[eDVBFrontend3] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend4] opening frontend
[eDVBFrontend4] opening frontend
[eDVBFrontend4] frontend 4 has DVB API 50a
[eDVBFrontend4] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend4] close frontend
[eDVBFrontend4] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend5] opening frontend
[eDVBFrontend5] opening frontend
[eDVBFrontend5] frontend 5 has DVB API 50a
[eDVBFrontend5] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend5] close frontend
[eDVBFrontend5] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend6] opening frontend
[eDVBFrontend6] opening frontend
[eDVBFrontend6] frontend 6 has DVB API 50a
[eDVBFrontend6] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend6] close frontend
[eDVBFrontend6] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend7] opening frontend
[eDVBFrontend7] opening frontend
[eDVBFrontend7] frontend 7 has DVB API 50a
[eDVBFrontend7] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend7] close frontend
[eDVBFrontend7] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBAdapterLinux] get demux 2
[eDVBAdapterLinux] get demux 3
[eDVBAdapterLinux] get demux 4
[eDVBAdapterLinux] get demux 5
[eDVBAdapterLinux] get demux 6
[eDVBAdapterLinux] get demux 7
[eDVBAdapterLinux] get demux 8
[eDVBAdapterLinux] get demux 9
[eDVBAdapterLinux] get demux 10
[eDVBAdapterLinux] get demux 11
[eDVBAdapterLinux] get demux 12
[eDVBResourceManager] found 1 adapter, 8 frontends(8 sim) and 13 demux
[eDVBLocalTimeHandler] Use valid Linux Time :) (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
[eEPGTransponderDataReader] Initialized
[MAIN] Loading spinners...
[MAIN] found 7 spinner!
[setIoPrio] best-effort level 3 ok
[HardwareInfo] Scanning hardware info
Detected: vuuno4kse (1500A0)
[CamControl] No softcam link? /etc/init.d/softcam
[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
[Console] command: mount /dev/mmcblk0p1 /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount /dev/mmcblk0p3 /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount /dev/mmcblk0p4 /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount /dev/mtdblock2 /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootek4da33m
[eConsoleAppContainer] Starting /bin/sh
[Multiboot] Bootslots found: {}
[Harddisk] enumerating block devices...
[Harddisk] new device=sda dev_path=/dev/sda disk_path=/dev/sda removable=False internal=True rotational=0 card=False
[Console] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Keyboard] Adding keymap 'azerty keyboard' ('azerty.kmap').
[Keyboard] Adding keymap 'German keyboard' ('de.kmap').
[Keyboard] Adding keymap 'Default (US)' ('default.kmap').
[Keyboard] Adding keymap 'Dreambox Keyboard Deutsch' ('dream-de.kmap').
[Keyboard] Adding keymap 'Dreambox Keyboard English' ('eng.kmap').
Activating language Deutsch
[Keyboard] Activating keymap: 'Default (US)'.
[Console] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh
[Geolocation] Warning: Geolocation has been disabled by user configuration!
[NimManager] Reading satellites.xml
eDVBSatelliteEquipmentControl::clear()
[SecConfigure] sec config cleared
[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 3 to slotid 3, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 4 to slotid 4, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 5 to slotid 5, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 6 to slotid 6, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 7 to slotid 7, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[SecConfigure] slot: 0 configmode: advanced
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=0
[SecConfigure] add 192 to 1
[eDVBSatelliteEquipmentControl::addLNB] lnb=0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=1
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1025000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=1
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 1 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 1 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=1, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=1)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=2
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1075000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=2
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 2 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 2 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=2, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=2)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=3
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1125000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=4
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 3 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 3 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=3, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=3)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=4
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1175000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=8
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 4 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 4 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=4, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=4)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=5
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1225000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=16
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 5 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 5 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=5, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=5)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=6
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1275000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=32
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 6 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 6 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=6, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=6)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=7
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1325000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=64
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] slot: 7 configmode: advanced
[SecConfigure] add 192 to 1
[SecConfigure] link tuner 7 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=7, 0
[eDVBSatelliteEquipmentControl::addLNB] lnb=7)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBSatCR] idx=8
[eDVBSatelliteEquipmentControl::setLNBSatCRvco] vco=1375000
eDVBSatelliteEquipmentControl::setLNBSatPositionNumber(1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(2)
eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=128
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=0
[SecConfigure] sec config completed
[Picon] adding path: /usr/share/enigma2/picon/
[ML] BlurayPlayer not installed: cannot import name 'BlurayPlayer' from 'Plugins.Extensions' (/usr/lib/enigma2/python/Plugins/Extensions/__init__.pyc)
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
[eDVBDB] 108 entries in Bouquet userbouquet.favourites.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favoriten_sd.tv
[eDVBDB] 65 entries in Bouquet userbouquet.favoriten_sd.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.epg_refresh.tv
[eDVBDB] 24 entries in Bouquet userbouquet.epg_refresh.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.astra_ebenen.tv
[eDVBDB] 96 entries in Bouquet userbouquet.astra_ebenen.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe04.tv
[eDVBDB] 170 entries in Bouquet userbouquet.dbe04.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.IPTV.tv
[eDVBDB] 22 entries in Bouquet userbouquet.IPTV.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.alternativ.tv
[eDVBDB] 14 entries in Bouquet userbouquet.alternativ.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.alpen.tv
[eDVBDB] 12 entries in Bouquet userbouquet.alpen.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
[eDVBDB] 1318 entries in Bouquet userbouquet.LastScanned.tv
[eDVBDB] 9 entries in Bouquet bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
[eDVBDB] 86 entries in Bouquet userbouquet.favourites.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.clean_radio_de.radio
[eDVBDB] 191 entries in Bouquet userbouquet.clean_radio_de.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.stream_duitsland.radio
[eDVBDB] 2010 entries in Bouquet userbouquet.stream_duitsland.radio
[eDVBDB] 3 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 720x576x32 stride=7680, 12960kB available for acceleration surfaces.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/ae_AlMateen.ttf' -> 'Replacement'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Subs'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Italic.ttf' -> 'Subsi'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Bold.ttf' -> 'Subsb'.
[Font] Adding font '/usr/share/fonts/LiberationSans-BoldItalic.ttf' -> 'Subsz'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml'.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'FdLcD'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 5400kB available for acceleration surfaces.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml' complete.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/lcd.ttf' -> 'LCD'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml' complete.
[Skin] Loading skin file 'skin_user.xml'.
[Skin] Warning: Skin file 'skin_user.xml' does not exist!
[InputDevice] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[InputDevice] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[eAVSwitch] cannot open /proc/stb/avs/0/input_choices: No such file or directory
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
[Timezones] Note: Classic time zones in '/etc/timezone.xml' are not available.
[Timezones] Setting time zone to 'Europe/Berlin'.
[Timezones] Local time is 'Mi 30-Aug-2023 17:22:50' - UTC time is 'Mi 30-Aug-2023 15:22:50'.
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
[Network.py] nameservers from resolv.conf: [[192, 168, 1, 1], [8, 8, 8, 8]]
[Network] read configured interface: {'eth0': {'dhcp': False, 'address': [192, 168, 1, 7], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
[Network] self.ifaces after loading: {'eth0': {'up': True, 'dhcp': False, 'preup': False, 'predown': False, 'dns-nameservers': [[192, 168, 1, 1], [8, 8, 8, 8]], 'ip': [192, 168, 1, 7], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 1, 7], 'mac': '00:1d:ec:17:e4:9a', 'gateway': [192, 168, 1, 1]}}
[waitForNetwork] Online, reload interface data
[Network.py] nameservers from resolv.conf: [[192, 168, 1, 1], [8, 8, 8, 8]]
[Network] read configured interface: {'eth0': {'dhcp': False, 'address': [192, 168, 1, 7], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
[Network] self.ifaces after loading: {'eth0': {'up': True, 'dhcp': False, 'preup': False, 'predown': False, 'dns-nameservers': [[192, 168, 1, 1], [8, 8, 8, 8]], 'ip': [192, 168, 1, 7], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 1, 7], 'mac': '00:1d:ec:17:e4:9a', 'gateway': [192, 168, 1, 1]}}
[eDboxLCD] setLCDBrightness 0
[gRC] main thread is non-idle! display spinner!
[eDboxLCD] setLCDBrightness 51
[MovieCut] set language to de
[MovieCut] set language to de
Current Picon Path : /usr/share/enigma2/picon/
[OpenWebif] -D- tuner '0' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner A'
[OpenWebif] -D- tuner '1' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner B'
[OpenWebif] -D- tuner '2' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner C'
[OpenWebif] -D- tuner '3' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner D'
[OpenWebif] -D- tuner '4' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner E'
[OpenWebif] -D- tuner '5' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner F'
[OpenWebif] -D- tuner '6' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner G'
[OpenWebif] -D- tuner '7' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner H'
[Network] Getting attribute: mac for adapter: eth0
[Network] Getting attribute: dhcp for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: gateway for adapter: eth0
[TIMER] record time changed, start prepare is now: Thu Jan 1 00:59:40 1970
Plugin Extensions/WebInterface failed to load: No module named 'Plugins.Extensions.WebInterface.plugin'
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'SRegular'.
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGRefresh] next enigma wakeup time 1693409520
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'SRegular'.
[TIMER] record time changed, start prepare is now: Thu Jan 1 00:59:40 1970
[SerienRecorder] RecordTimerEntry attributes ['InfoBarInstance', 'StateEnded', 'StatePrepared', 'StateRunning', 'StateWaiting', 'TryQuitMainloop', '_RecordTimerEntry__record_service', '__class__', '__delattr__', '__dict__', '__dir__', '__doc__', '__eq__', '__format__', '__ge__', '__getattribute__', '__gt__', '__hash__', '__init__', '__init_subclass__', '__le__', '__lt__', '__module__', '__ne__', '__new__', '__reduce__', '__reduce_ex__', '__repr__', '__setattr__', '__sizeof__', '__str__', '__subclasshook__', '__weakref__', 'abort', 'activate', 'addOneDay', 'afterEvent', 'always_zap', 'autoincrease', 'autoincreasetime', 'background_zap', 'backoff', 'begin', 'calculateFilename', 'cancelled', 'change_frontend', 'checkingTimeshiftRunning', 'conflict_detection', 'descramble', 'description', 'dirname', 'dirnameHadToFallback', 'disable', 'disabled', 'do_backoff', 'dontSave', 'eit', 'enable', 'end', 'external', 'external_prev', 'failureCB', 'findNextEvent', 'findRunningEvent', 'first_try_prepare', 'flags', 'getNextActivation', 'gotRecordEvent', 'isFindNextEvent', 'isFindRunningEvent', 'isRunning', 'justplay', 'keypress', 'log', 'log_entries', 'log_tuner', 'name', 'needChangePriorityFrontend', 'openChoiceActionBeforeZap', 'pipzap', 'prepare_time', 'processRepeated', 'rec_ref', 'receiveRecordEvents', 'record_ecm', 'record_service', 'rename_repeat', 'repeated', 'repeatedbegindate', 'resetRepeated', 'resetState', 'sendStandbyNotification', 'sendTryQuitMainloopNotification', 'sendactivesource', 'service_ref', 'setAdvancedPriorityFrontend', 'setAutoincreaseEnd', 'setRecordService', 'setRecordingPreferredTuner', 'setRepeated', 'setWasInDeepStandby', 'setWasInStandby', 'shouldSkip', 'shutdown', 'start_prepare', 'state', 'staticGotRecordEvent', 'stopTryQuitMainloop', 'tags', 'timeChanged', 'timer', 'tryPrepare', 'ts_dialog', 'wasInDeepStandby', 'wasInStandby', 'zap_wakeup']
[SerienRecorder] RecordTimerEntry has 'justplay'
[SerienRecorder] RecordTimerEntry has 'always_zap' or 'zapbeforerecord'
<RemoteControlCode> Write Remote Control Code : 2
[VideoHardware] reading preferred modes override, using all video modes
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[VideoHardware] getModeList for port DVI
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] setMode - port: DVI mode: 1080p rate: auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[AutoMount.py] UMOUNT-CMD-1 ---> umount -fl '/media/net/WollesDVDs'
[Console] command: umount -fl '/media/net/WollesDVDs'
[eConsoleAppContainer] Starting /bin/sh
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
[MAIN] executing main
Starting BT Hotplug thread
[setVoiceCheckDB] value : -33
[eInit] + (41) eServiceFactoryMP3
[TIMER] record time changed, start prepare is now: Wed Aug 30 17:41:40 2023
[eDVBFrontend0] opening frontend
[eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2935, guard_offset 0
700de702(?)
[eDVBServiceRecord] RECORD service event 13
[TimerSanityCheck] conflict not found!
[Timer] Record RecordTimerEntry(name=Leute heute, begin=Wed Aug 30 17:42:00 2023, serviceref=1:0:19:2B66:3F3:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Sep 2 17:00:40 2023
[eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2935, guard_offset 0
700de702(?)
[eDVBServiceRecord] RECORD service event 13
[TimerSanityCheck] conflict not found!
[Timer] Record RecordTimerEntry(name=Krimi am Samstag, begin=Sat Sep 2 17:01:00 2023, serviceref=1:0:A:28D7:40F:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Sep 3 19:00:40 2023
[eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2935, guard_offset 0
700de702(?)
[eDVBServiceRecord] RECORD service event 13
[TimerSanityCheck] conflict not found!
[Timer] Record RecordTimerEntry(name=Kriminalhörspiel, begin=Sun Sep 3 19:01:00 2023, serviceref=1:0:A:28AD:40F:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Mon Aug 28 09:31:40 2023
[TimerSanityCheck] timer is finished!
[Timer] Record RecordTimerEntry(name=Handwerkskunst!, begin=Mon Aug 28 09:32:00 2023, serviceref=1:0:19:288A:40F:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Wed Aug 30 20:00:40 2023
[TimerSanityCheck] Exception - timer does not have to be checked!
[Timer] Record RecordTimerEntry(name=Hörspiel, begin=Wed Aug 30 20:01:00 2023, serviceref=1:0:A:28A1:40F:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Thu Aug 31 22:57:40 2023
[TimerSanityCheck] Exception - timer does not have to be checked!
[Timer] Record RecordTimerEntry(name=1LIVE Shortstory, begin=Thu Aug 31 22:58:00 2023, serviceref=1:0:A:28D3:40F:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sat Sep 2 19:00:40 2023
[TimerSanityCheck] Exception - timer does not have to be checked!
[Timer] Record RecordTimerEntry(name=SWR2 Krimi, begin=Sat Sep 2 19:01:00 2023, serviceref=1:0:A:28CA:40F:1:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Mon Sep 4 22:00:40 2023
[TimerSanityCheck] Exception - timer does not have to be checked!
[Timer] Record RecordTimerEntry(name=Kriminalhörspiel, begin=Mon Sep 4 22:01:00 2023, serviceref=1:0:2:6D6C:437:1:C00000:0:0:0:, justplay=0)
[EPGRefresh] next enigma wakeup time 0
[EPGRefresh] Use OpenWebif
[SerienRecorder] Start: 30.08.2023 - 17:22:52
[SerienRecorder] Auto-Check: ON
[SerienRecorder] addWebInterface for OpenWebif = True
[SerienRecorder] addExternalChild for API [True]
[SerienRecorder] WebUI root path: FilePath('/usr/lib/enigma2/python/Plugins/Extensions/serienrecorder/web-data')
[SerienRecorder] addExternalChild for UI [True]
[Skin] No skin to read or screen to display.
[Skin] Processing screen '<embedded-in-auto3D>', position=(0, 0), size=(0 x 0) for module 'auto3D'.
[Skin] Processing screen 'SimpleSummary' from list 'auto3D_summary, SimpleSummary', position=(0, 0), size=(400 x 240) for module 'SimpleSummary'.
[Screen] Showing screen '['auto3D_summary', 'SimpleSummary']'.
[Screen] Showing screen 'auto3D'.
[VPS-Plugin] next execution in 900 sec
[OpenWebif] loading external plugins...
[OpenWebif] plugin 'SerienRecorder-API' loaded on path '/serienrecorderapi'
[OpenWebif] plugin 'SerienRecorder' loaded on path '/serienrecorderui'
[OpenWebif] started on 80
[Avahi] AvahiServiceEntry (null) (_http._tcp) 80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vuuno4kse (_http._tcp) on vuuno4kse:80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vuuno4kse (_http._tcp) on vuuno4kse:80
[eEPGCache] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[Skin] Parsing embedded skin '<embedded-in-Screensaver>'.
[Skin] Processing screen '<embedded-in-Screensaver>', position=(0, 0), size=(1920 x 1080) for module 'Screensaver'.
[Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[Skin] Processing screen 'SecondInfoBarSimple', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Screen] Showing screen 'SecondInfoBarSimple'.
[Skin] Parsing embedded skin '<embedded-in-HideVBILine>'.
[Skin] Processing screen '<embedded-in-HideVBILine>', position=(0, 0), size=(1920 x 7) for module 'HideVBILine'.
[Screen] Showing screen 'HideVBILine'.
[Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1920 x 1080) for module 'ChannelSelection'.
[ActionMap] Keymap(s) 'InfobarEPGActions' -> Undefined action(s) 'showEventInfoMultiEPG, showInfobarOrEpgWhenInfobarAlreadyVisible'.
[Skin] Processing screen 'RdsInfoDisplay', position=(22, 90), size=(1920 x 300) for module 'RdsInfoDisplay'.
[Skin] No skin to read or screen to display.
[Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(0, 0), size=(0 x 0) for module 'RdsInfoDisplaySummary'.
[Screen] Showing screen 'RdsInfoDisplaySummary'.
[Skin] Processing screen 'UnhandledKey', position=(1856, 10), size=(34 x 45) for module 'UnhandledKey'.
[Skin] Processing screen 'VideoMode', position=(127, 67), size=(600 x 75) for module 'VideoMode'.
[Skin] Processing screen 'Dish', position=(30, 90), size=(195 x 303) for module 'Dish'.
[Skin] Processing screen 'BufferIndicator', position=(660, 45), size=(600 x 48) for module 'BufferIndicator'.
[HelpActionMap] removed duplicity: InfobarTimeshiftActions ('seekFwdManual', 'Vorwärts spulen (Zeit eingeben)')
[HelpActionMap] removed duplicity: InfobarTimeshiftActions ('seekBackManual', 'Rückwärts springen (Zeit eingeben)')
[HelpActionMap] removed duplicity: InfobarSeekActions ('jumpPreviousMark', 'Springe zur vorherigen Markerposition')
[HelpActionMap] removed duplicity: InfobarSeekActions ('jumpNextMark', 'Springe zur nächsten Markerposition')
[Skin] Processing screen 'TimeshiftState', position=(150, 67), size=(1620 x 150) for module 'TimeshiftState'.
[Skin] Processing screen 'TimeshiftLive', position=(105, 105), size=(450 x 45) for module 'TimeshiftLive'.
[Skin] Processing screen 'SubtitleDisplay', position=(0, 0), size=(1920 x 1080) for module 'SubtitleDisplay'.
RemovePopup, id = ZapError
[eEPGCache] 109132 events read from /media/hdd/epg.dat
[eEPGTransponderDataReader] start Mainloop
[Skin] Processing screen 'InfoBar', position=(0, 0), size=(1920 x 1080) for module 'InfoBar'.
[Screen] Showing screen 'RdsInfoDisplay'.
[Skin] Processing screen 'InfoBarSummary', position=(0, 0), size=(400 x 240) for module 'InfoBarSummary'.
[Skin] Error in screen 'InfoBarSummary' widget 'widget' [Skin] {PLi-FullNightHD/skin.xml}: Renderer '---Label' not found! Please contact the skin's author!!
[Skin] Attribute 'halign' (with value of 'center') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'valign' (with value of 'center') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'foregroundColor' (with value of '#ff0000') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'foregroundColor' (with value of '#ff0000') in object of type 'ePixmap' is not implemented!
[Screen] Showing screen 'InfoBarSummary'.
[Screen] Showing screen 'TimeshiftState'.
[Screen] Showing screen 'InfoBar'.
[Skin] Processing screen 'Volume', position=(0, 360), size=(30 x 330) for module 'Volume'.
[Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
[Skin] Processing screen 'Mute', position=(937, 15), size=(45 x 45) for module 'Mute'.
[Volume] Volume set to 100.
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[Skin] Processing screen 'Scart', position=(0, 0), size=(1920 x 1080) for module 'Scart'.
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Navigation] playing: 1:0:19:288A:40F:1:C00000:0:0:0:
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 040f:0001
[eDVBSatelliteEquipmentControl] SlotID: 0 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 2 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 3 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 4 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 5 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 6 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 6 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 7 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 7 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBFrontend0] opening frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] SlotID: 0 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x28e8, guard_offset 0
**** Tuning JESS
**** frequency_mhz: 11052
**** lo_mhz: 9750
**** T: 1202
**** position: 0
**** ub: 1
**** mode: 2
**** JESS: 70 0c b2 02
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11052000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1026 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:288A:40F:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Console] finished: umount -fl '/media/net/WollesDVDs'
[AutoMount.py] CheckMountPointFinished umount: can't unmount /media/net/WollesDVDs: No such file or directory
1
[AutoMount.py] CheckMountPointFinished, verifying: /media/net/WollesDVDs
[AutoMount.py] UMOUNT-CMD-1 ---> umount -fl '/media/net/HeikesDVDs'
[Console] command: umount -fl '/media/net/HeikesDVDs'
[eConsoleAppContainer] Starting /bin/sh
[AutoMount.py] CheckMountPointFinished, # of appContainers: 1
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set static current limiting
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] invalidate current switch params
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuuno4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] sleep 200ms
[Console] finished: umount -fl '/media/net/HeikesDVDs'
[AutoMount.py] CheckMountPointFinished umount: can't unmount /media/net/HeikesDVDs: No such file or directory
1
[AutoMount.py] CheckMountPointFinished, verifying: /media/net/HeikesDVDs
[AutoMount.py] UMOUNT-CMD-1 ---> umount -fl '/media/net/KlemisDVDs'
[Console] command: umount -fl '/media/net/KlemisDVDs'
[eConsoleAppContainer] Starting /bin/sh
[AutoMount.py] CheckMountPointFinished, # of appContainers: 1
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuuno4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuuno4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Console] finished: umount -fl '/media/net/KlemisDVDs'
[AutoMount.py] CheckMountPointFinished umount: can't unmount /media/net/KlemisDVDs: No such file or directory
1
[AutoMount.py] CheckMountPointFinished, verifying: /media/net/KlemisDVDs
[AutoMount.py] UMOUNT-CMD-1 ---> umount -fl '/media/net/video'
[Console] command: umount -fl '/media/net/video'
[eConsoleAppContainer] Starting /bin/sh
[AutoMount.py] CheckMountPointFinished, # of appContainers: 1
[Console] finished: umount -fl '/media/net/video'
[AutoMount.py] CheckMountPointFinished umount: can't unmount /media/net/video: No such file or directory
1
[AutoMount.py] CheckMountPointFinished, verifying: /media/net/video
[AutoMount.py] UMOUNT-CMD-3 ---> umount -fl '/media/net/record'
[AutoMount.py] NFS MOUNT-CMD---> mount -t nfs -o rw,nolock,tcp,retry=0,intr,soft,noatime '192.168.1.2:/volume2/record' '/media/net/record'
[Console] command: mount -t nfs -o rw,nolock,tcp,retry=0,intr,soft,noatime '192.168.1.2:/volume2/record' '/media/net/record'
[eConsoleAppContainer] Starting /bin/sh
[AutoMount.py] CheckMountPointFinished, # of appContainers: 1
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] setVoltage 2
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[eDVBFrontend0] setTone 0
[eDVBFrontend0] sleep 75ms
[Console] finished: mount -t nfs -o rw,nolock,tcp,retry=0,intr,soft,noatime '192.168.1.2:/volume2/record' '/media/net/record'
[AutoMount.py] CheckMountPointFinished 0
[AutoMount.py] CheckMountPointFinished, verifying: /media/net/record
[AutoMount.py] CheckMountPointFinished, # of appContainers: 0
[eDVBFrontend0] sendDiseqc: 700cb202(?)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] fe event: status 7, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0xad57c8 running
[eEPGTransponderDataReader] channel 0xad57c8 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (1537), and 1 audio stream(s) (153c), and the pcr pid is 1537, and the text pid is 153a
[eDVBChannel] getDemux cap=01
[eTSMPEGDecoder] decoder state: play, vpid=1537, apid=153c
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x1537 ok
[eDVBPCR0] DEMUX_START ok
[eEPGChannelData] next update in 2 sec
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x153c ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x1537 ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBText0] DMX_SET_PES_FILTER pid=0x153a ok
[eDVBText0] DEMUX_START ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=153a
[eDVBPESReader] DMX_SET_PES_FILTER pid=153a
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
[eDVBCAService] new service 1:0:19:288A:40F:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:288A:40F:1:C00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 0x0 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 50000 fps
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eDVBFrontend0] set dynamic current limiting
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 1536 for service_id 288a
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5430
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5400
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5410
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=4370
[eDVBServicePlay] have 1 video stream(s) (1537), and 4 audio stream(s) (1538, 1539, 153d, 153c), and the pcr pid is 1537, and the text pid is 153a
[eTSMPEGDecoder] decoder state: play, vpid=1537, apid=153c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=4370
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5430
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1280x720 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 50000 fps
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5420
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5430
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5440
[eDVBServicePMTHandler] AITready
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=4372
[eDVBServicePMTHandler] AIT: HBBTV-Start-DSMCC+Web
[eDVBServicePMTHandler] AIT: HBBTV ARD-Mediathek
[eDVBServicePMTHandler] AIT: EPG
[eDVBServicePMTHandler] AIT: Replay
[eDVBServicePMTHandler] AIT: HbbTV SR Mediathek
[eDVBServicePMTHandler] AIT: HBBTV SR Text
[eDVBServicePMTHandler] AIT: Tagesschau
[eDVBServicePMTHandler] AIT: KiKA-Player ARD
[eDVBServicePMTHandler] AIT: Teaser Test App
[eDVBServicePMTHandler] AIT: ARD Audiothek
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5490
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=110
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=120
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=130
[eEPGChannelData] start reading events(1693408976)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=140
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eDVBServicePMTHandler] sdt update done!
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eConsoleAppContainer] Starting /usr/bin/grab
[eDVBServicePMTHandler] OCready
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eConsoleAppContainer] Starting /usr/bin/grab
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eEPGChannelData] abort non avail schedule other reading
[eEPGChannelData] abort non avail netmed schedule reading
[eEPGChannelData] abort non avail netmed schedule other reading
[eEPGChannelData] abort non avail FreeSat schedule_other reading
[eEPGChannelData] abort non avail viasat reading
[eEPGChannelData] nownext finished(1693408984)
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eDVBServicePlay] timeshift
[Standby] enter standby
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:288A:40F:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:288A:40F:1:C00000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBText0] DEMUX_STOP ok
[eDVBText0] destroy
[eDVBResourceManager] start release channel timer
[Skin] Processing screen 'Standby', position=(0, 0), size=(1920 x 1080) for module 'Standby'.
[Skin] Processing screen 'StandbySummary', position=(0, 0), size=(400 x 240) for module 'StandbySummary'.
[Skin] Attribute 'foregroundColor' (with value of '#ff0000') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'foregroundColor' (with value of '#ff0000') in object of type 'ePixmap' is not implemented!
[Screen] Showing screen 'StandbySummary'.
[eDboxLCD] setLCDBrightness 0
[Screen] Showing screen 'Standby'.
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[DVBCAHandler] no more services
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eConsoleAppContainer] Starting /usr/bin/grab
[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0xad57c8
[eEPGTransponderDataReader] remove channel 0xad57c8
[eEPGChannelData] abort caching events !!
[eDVBResourceManager] stop release channel timer
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eDVBFrontend0] close frontend
**** shutdown JESS ub 1
[eDVBFrontend0] [turnOffSatCR] running mainloop
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 200ms
[eDVBFrontend0] setVoltage 4
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 1 FE_SET_VOLTAGE 1
[eDVBFrontend0] setTone 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] sendDiseqc: 70080000(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] fe event: status 7, inversion off, m_tuning 0
[eDVBFrontend0] stateLostLock
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] delayed close frontend
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[SerienRecorder] Initialize checkForRecording manual: False (with TV-Planer: False)
[SerienRecorder] Timer-Suchlauf Uhrzeit-Timer gestartet.
[SerienRecorder] Verbleibende Zeit: 22:24 Stunden
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
Current Picon Path : /usr/share/enigma2/picon/
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[OpenWebif] page 'b'/root'' not found
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[OpenWebif] page 'b'/favicon.ico'' not found
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[OpenWebif] ERROR! Template not found for page 'b'/root/''
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[eEPGCache] event 6493 not found in epgcache
[eEPGCache] event 24f2 not found in epgcache
[eEPGCache] event a8a7 not found in epgcache
[eEPGCache] event 7e82 not found in epgcache
[eEPGCache] event 8511 not found in epgcache
[eEPGCache] event 0124 not found in epgcache
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Console] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Console] finished: ('hdparm', 'hdparm', '-y', '/dev/sda')
[VPS-Plugin] next execution in 900 sec
[TIMER] activating state 1
[TIMER] Filename calculated as: '/media/hdd/movie/20230830_1742_-_ZDF_HD_-_LEUTE_HEUTE'
[TIMER] 1:0:19:2B66:3F3:1:C00000:0:0:0:
[Navigation] recording service: 1:0:19:2B66:3F3:1:C00000:0:0:0:
[add callback]
[TIMER] record event 10
[eDVBResourceManager] allocate channel.. 03f3:0001
[eDVBSatelliteEquipmentControl] SlotID: 0 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] SlotID: 1 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 2 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 3 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 4 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 5 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 6 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 6 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBSatelliteEquipmentControl] SlotID: 7 direct_connected: 0
[eDVBSatelliteEquipmentControl] lnb 7 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15000
[eDVBFrontend0] opening frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] SlotID: 0 direct_connected: 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 15005
[eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x2935, guard_offset 0
**** Tuning JESS
**** frequency_mhz: 11361
**** lo_mhz: 9750
**** T: 1511
**** position: 0
**** ub: 1
**** mode: 2
**** JESS: 70 0d e7 02
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11361000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1025 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBServiceRecord] RECORD service event 13
[eDVBCIInterfaces] addPMTHandler 1:0:19:2B66:3F3:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eEPGCache] saveEventToFile epg event id d51d
[TIMER] prepare ok, waiting for begin
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 200ms
[eDVBFrontend0] setVoltage 2
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[eDVBFrontend0] setTone 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] sendDiseqc: 700de702(?)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] fe event: status 7, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0xb4aa40 running
[eEPGTransponderDataReader] channel 0xb4aa40 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServiceRecord] RECORD service event 5
[TIMER] record event 6
[eDVBCAService] new service 1:0:19:2B66:3F3:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:2B66:3F3:1:C00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServiceRecord] RECORD service event 6
[eDVBServiceRecord] tuned..
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[TIMER] record event 2
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eEPGChannelData] next update in 2 sec
[eDVBServiceRecord] now running: hallo deutschland (2100 seconds)
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 17d4 for service_id 2b66
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=6100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=6100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBServiceRecord] RECORD service event 5
[TIMER] record event 6
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=6170
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=6100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=6300
[eDVBServicePMTHandler] sdt update done!
[eDVBFrontend0] set dynamic current limiting
[eDVBServicePMTHandler] AITready
[eDVBServicePMTHandler] AIT: ZDF Start
[eDVBServicePMTHandler] AIT: ZDF mediathek
[eDVBServicePMTHandler] AIT: ZDF Nachrichten
[eDVBServicePMTHandler] AIT: ZDF Programm
[eDVBServicePMTHandler] AIT: KiKA-Player
[eDVBServiceRecord] RECORD service event 11
[eEPGChannelData] start reading events(1693410102)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eEPGChannelData] abort non avail schedule other reading
[eEPGChannelData] abort non avail netmed schedule reading
[eEPGChannelData] abort non avail netmed schedule other reading
[eEPGChannelData] abort non avail FreeSat schedule_other reading
[eEPGChannelData] abort non avail viasat reading
[eEPGChannelData] nownext finished(1693410110)
[eEPGChannelData] schedule finished(1693410117)
[eEPGChannelData] stop caching events(1693410117)
[eEPGChannelData] next update in 60 min
[TIMER] activating state 2
[TIMER] record event 0
[eDVBServiceRecord] Recording to /media/hdd/movie/20230830_1742_-_ZDF_HD_-_LEUTE_HEUTE.ts...
[eDVBServiceRecord] start recording...
[eDVBServiceRecord] RECORD: have 1 video stream(s) (17de), and 4 audio stream(s) (17e8, 17e9, 17ea, 17eb) (17f3), and the pcr pid is 17de, and the text pid is 17f2
[eDVBServiceRecord] ADD PID: 0000
[eDVBServiceRecord] ADD PID: 17d4
[eDVBServiceRecord] ADD PID: 17de
[eDVBServiceRecord] ADD PID: 17e8
[eDVBServiceRecord] ADD PID: 17e9
[eDVBServiceRecord] ADD PID: 17ea
[eDVBServiceRecord] ADD PID: 17eb
[eDVBServiceRecord] ADD PID: 17f2
[eDVBServiceRecord] ADD PID: 17f3
[eDVBServiceRecord] ADD PID: 181a
[eFilePushThreadRecorder] THREAD START
[setIoPrio] realtime level 7 ok
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[TIMER] record event 4
[TIMER] start recording on tuner: A
[eDVBServiceRecord] pcr of eit change: f820638a
[eDVBServiceRecord] now running: Leute heute (900 seconds)
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBServiceRecord] pcr of eit change: fabdad0a
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[VPS-Plugin] next execution in 900 sec
[eDVBServiceRecord] pcr of eit change: fb22b1fa
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBServiceRecord] pcr of eit change: fb63adea
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBServiceRecord] pcr of eit change: fc9f26da
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBServiceRecord] pcr of eit change: fdf172c2
[eDVBServiceRecord] now running: SOKO Wismar (3240 seconds)
[TIMER] record event 9
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[TIMER] activating state 3
[TIMER] stop recording on tuner: A
[eDVBServiceRecord] stop recording!
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] stopping thread: 100
[eFilePush] SIGUSR1 received
[eFilePushThreadRecorder] read got interrupted by signal, stop: 1
[eDVBRecordFileThread] waiting for aio to complete
[eDVBRecordFileThread] buffer usage histogram (40 buffers of 188 kB)
[eDVBRecordFileThread] 0: 76
[eDVBRecordFileThread] 1: 7557
[eDVBRecordFileThread] 2: 7478
[eFilePushThreadRecorder] stopping thread: 99
[eFilePushThreadRecorder] stopping thread: 98
[eFilePushThreadRecorder] stopping thread: 97
[eFilePushThreadRecorder] stopping thread: 96
[eFilePush] SIGUSR1 received
[eFilePushThreadRecorder] THREAD STOP
[eDVBTSTools] setSource loading streaminfo for /media/hdd/movie/20230830_1742_-_ZDF_HD_-_LEUTE_HEUTE.ts
[eDVBServiceRecord] fixed up fc9f26da to 54fdf97 (offset 0)
[eDVBServiceRecord] fixed up fdf172c2 to 6a22b7f (offset 0)
[TIMER] record event 5
[TIMER] record event 1
[remove callback]
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:2B66:3F3:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:2B66:3F3:1:C00000:0:0:0:
[eDVBResourceManager] start release channel timer
[Trashcan] bytesToRemove -422117900288 /media/hdd/movie/.Trash
[Trashcan] Bytes to remove remaining: -422117900288 /media/hdd/movie/.Trash
[Trashcan] Size after purging: 701883085 /media/hdd/movie/.Trash
[DVBCAHandler] no more services
[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0xb4aa40
[eEPGTransponderDataReader] remove channel 0xb4aa40
[eDVBResourceManager] stop release channel timer
[eDVBFrontend0] close frontend
**** shutdown JESS ub 1
[eDVBFrontend0] [turnOffSatCR] running mainloop
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 200ms
[eDVBFrontend0] setVoltage 4
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 1 FE_SET_VOLTAGE 1
[eDVBFrontend0] setTone 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] sendDiseqc: 70080000(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] fe event: status 7, inversion off, m_tuning 0
[eDVBFrontend0] stateLostLock
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] delayed close frontend
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[VPS-Plugin] next execution in 900 sec
[Console] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Console] finished: ('hdparm', 'hdparm', '-y', '/dev/sda')
[VPS-Plugin] next execution in 900 sec
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler] RTC time is 18:37:01
[eDVBLocalTimerHandler] Receiver time is 18:37:03
[eDVBLocalTimerHandler] RTC to Receiver time difference is 2 seconds
[eDVBLocalTimerHandler] slewing Linux Time by -02 seconds
[VPS-Plugin] next execution in 900 sec
[VPS-Plugin] next execution in 900 sec
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler] RTC time is 19:07:02
[eDVBLocalTimerHandler] Receiver time is 19:07:03
[eDVBLocalTimerHandler] RTC to Receiver time difference is 1 seconds
[eDVBLocalTimerHandler] slewing Linux Time by -01 seconds
[VPS-Plugin] next execution in 900 sec
[VPS-Plugin] next execution in 900 sec
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler] RTC time is 19:37:02
[eDVBLocalTimerHandler] Receiver time is 19:37:05
[eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
[eDVBLocalTimerHandler] slewing Linux Time by -03 seconds
[VPS-Plugin] next execution in 900 sec
[VPS-Plugin] next execution in 900 sec
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler] RTC time is 20:07:03
[eDVBLocalTimerHandler] Receiver time is 20:07:05
[eDVBLocalTimerHandler] RTC to Receiver time difference is 2 seconds
[eDVBLocalTimerHandler] slewing Linux Time by -02 seconds
[VPS-Plugin] next execution in 900 sec
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] ADD Service 'vuduo4kse' of type '_e2stream._tcp' at vuduo4kse.local:8001
ADD Peer vuduo4kse=vuduo4kse.local:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] ADD Service 'vuduo4kse' of type '_e2stream._tcp' at vuduo4kse.local:8001
ADD Peer vuduo4kse=vuduo4kse.local:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[VPS-Plugin] next execution in 900 sec
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
[Network] Getting attribute: ip for adapter: eth0
[Network] Getting attribute: netmask for adapter: eth0
current active Boxes:
Zgemma H7S, Vuuno4kse, Vuduo4kse & Octagon SF8008 @ Astra 19,2° & Hotbird 13°
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #13
-
- PLi® Contributor
- 1,828 posts
+83
Good
Posted 31 August 2023 - 22:24
mhh...
es crasht nicht, aber es scheint die Daten nicht zu interpretieren
python3 benötigt str->six...
Den commit im OE-Alliance finde ich leider nur schlecht kommentiert, aber dies weist darauf hin.
https://github.com/o...d272f4293eab8b8
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #14
-
- Senior Member
- 314 posts
0
Neutral
Posted 1 September 2023 - 07:28
Kann ich irgendwas testen?
Ansonsten hoffe ich, dass sich jemand der Sache annimmt
current active Boxes:
Zgemma H7S, Vuuno4kse, Vuduo4kse & Octagon SF8008 @ Astra 19,2° & Hotbird 13°
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #15
-
- PLi® Contributor
- 1,828 posts
+83
Good
Posted 1 September 2023 - 12:22
Du kannst es gerne mit der angepassten Datei mal versuchen.
Grüße
Attached Files
-
enigma2-plugin-systemplugins-vps_git5683+2ee1b7f-r0_armv7ahf-neon.ipk 34.75KB
2 downloads
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #16
-
- Senior Member
- 314 posts
0
Neutral
Posted 1 September 2023 - 16:45
Mit der Version hängt der Receiver momentan in einer Crash- Schleife.
Aus dieser komme ich nicht heraus, solange der Timer (Leute Heute bei ZDF) inklusive Vor- und Nachlauf aktiv ist.
Ich habe den Receiver jetzt am Hauptschalter ausgeschaltet...
Edited by alabama, 1 September 2023 - 16:45.
current active Boxes:
Zgemma H7S, Vuuno4kse, Vuduo4kse & Octagon SF8008 @ Astra 19,2° & Hotbird 13°
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #17
-
- PLi® Contributor
- 1,828 posts
+83
Good
Posted 1 September 2023 - 20:56
Ok, wenn es bei dir crasht, dann gibt es ein Log?
Hast es jetzt wahrscheinlich nach Neustart deinstalliert.
Wäre auch zu schön gewesen, wenn es direkt geklappt hätte.
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #18
-
- PLi® Core member
- 10,051 posts
+339
Excellent
Posted 2 September 2023 - 06:13
GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #19
-
- Senior Member
- 314 posts
0
Neutral
Posted 2 September 2023 - 06:34
ja, ich habe die Version wieder deinstalliert...
Hier, der erste Crashlog.
Es folgten noch einige Crashlogs, die von der Dateigröße jedoch kleiner waren.
enigma2_crash_1693582621.log 44KB
4 downloads
Edited by alabama, 2 September 2023 - 06:37.
current active Boxes:
Zgemma H7S, Vuuno4kse, Vuduo4kse & Octagon SF8008 @ Astra 19,2° & Hotbird 13°
Re: Das erste 9.0 Release Candidate Image ist online seit Heute. #20
-
- PLi® Core member
- 56,473 posts
+693
Excellent
Posted 2 September 2023 - 11:58
Python 2 to 3 conversion related.
Merge request merged which is most likely the solution.
But hiding vps lines is standard in our image.
Merge request merged which is most likely the solution.
But hiding vps lines is standard in our image.
Edited by littlesat, 2 September 2023 - 12:00.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
