You might reboot the box and probably the size of the font is back to normal.
Some other brands that Dags support show the same issue.
qviart lunix
Started by Lonoe, 12 Oct 2023 08:56
40 replies to this topic
Re: qviart lunix #21
-
- Forum Moderator
PLi® Core member - 27,490 posts
+397
Excellent
Posted 11 November 2023 - 17:40
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: qviart lunix #22
-
- Member
- 14 posts
0
Neutral
Posted 11 November 2023 - 18:05
Yes, at the reboot it is fine until the other reboot, one is fine and the other is not
Re: qviart lunix #23
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted 11 November 2023 - 19:04
Smells like a driver bug. If ATV doesn't have that problem, it might also be something that was fixed in the newer driver we never received.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #24
-
- Member
- 14 posts
0
Neutral
Posted 11 November 2023 - 19:43
ok I wrote to the manufacturer ,asking for the latest updated drivers ,let's see if they respond
possibly to me or directly to you, thank you
Re: qviart lunix #25
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted 11 November 2023 - 20:00
Lets hope they do, fingers crossed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #26
-
- Member
- 11 posts
0
Neutral
Posted Today, 14:59
With "initual skin" you mean the Qviart boot logo, or do you mean the OpenPLi startup screen?
MY BOX IS HANGED ON "Initial Skin" After i Flashed New firmware 9.0.
Hello Friends, i am Having Qviart Lunix, it was running Open Pli firmware from 2017, i updated with the latest version openpli-9.0-release-lunix-20241027_usb, the Installation was smooth & successful but after the reboot now the stb is hanged on Qviart Linux Boot Logo, tried 2-3 times power on-off
it just flashes twice on the Boot Logo and don't go further, No Pli Home Menu.
Further searching on the pli forum came to know that they don't have the original driver from the manufacturer, so the new images after 7.1 is not compatible, where as Open ATV IMAGE
works.
Now my problem is that since its hanged on boot logo, No Image is Detected via USB, be it Open ATV, PureE2 , Openspa, Nothing flashes on the Screen saying New Update Found,
The Only thing is that I can Communicate with the stb Via WINSCP and Putty, i can see all the folders and transfer files.
I want to know is there any way i can install New Image Open Atv via file transfer, if yes than please tell me how? and in in which folder should i Place the Image Firmware,
and the Syntax Command,
Thanks.
Re: qviart lunix #27
-
- Member
- 11 posts
0
Neutral
Posted Today, 15:02
My Qviart Lunix Is Hanged On Initial Logo After i flashed with Pli Version 9.
Hello Friends, i am Having Qviart Lunix, it was running Open Pli firmware from 2017, i updated with the latest version openpli-9.0-release-lunix-20241027_usb, the Installation was smooth & successful but after the reboot now the stb is hanged on Qviart Linux Boot Logo, tried 2-3 times power on-off
it just flashes twice on the Boot Logo and don't go further, No Pli Home Menu.
Further searching on the pli forum came to know that they don't have the original driver from the manufacturer, so the new images after 7.1 is not compatible, where as Open ATV IMAGE works.
Now my problem is that since its hanged on boot logo, No Image is Detected via USB, be it Open ATV, PureE2 , Openspa, Nothing flashes on the Screen saying New Update Found,
The Only thing is that I can Communicate with the stb Via WINSCP and Putty, i can see all the folders and transfer files.
I want to know is there any way i can install New Image Open Atv via file transfer, if yes than please tell me how? and in in which folder should i Place the Image Firmware,
and the Syntax Command,
Thanks.
Edited by Neeam, Today, 15:05.
Re: qviart lunix #28
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted Today, 15:04
For you the same question, does it hang on the Qviart logo ( i.e. the box doesn't boot ), or on the OpenPLi 9.0 logo ( i.e. Enigma doesn't start ) ?
edit: ah, now see your earlier post. So it doesn't boot.
No idea what we mean with "no original driver"? All drivers are original, there is no difference between what we use and what other images use.
If the box doesn't detect the USB device, make sure you disconnect ALL other USB devices, and use an old, small sized (max. 4GB) USB 2.0 stick. New and large USB3 devices take to long to initialize, the bootloader doesn't wait that long.
Also, if you can connect to the box with PuTTY, it means it DOES boot, which is in contradiction to your earlier statement.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #29
-
- Member
- 11 posts
0
Neutral
Posted Today, 15:15
its Hanged On Qviart Lunix Boot Logo, don't go further on Pli Logo, But i can FTP With WINSCP also Putty, i see all the folder and transfer files Via PC, Tried 3-4 USB, 1GB,8GB, 16GB
All prepared with low lewel format tool and fat32 with MBR Parttions, but no luck.
I also did opkg install
opkg update, everything went smoothy in putty, i ahve a log file, which i can attached here.
Crash Report
OpenPLi Enigma2 crash log
crashdate=Thu Nov 14 12:48:15 2024
compiledate=Oct 27 2024
skin=Default Skin
sourcedate=2024-10-11
branch=release-9.0
rev=81e8a63
component=enigma2
kernelcmdline=rootfstype=ubifs root=ubi0:rootfs slab_max_order=0 rootflags=sync ubi.mtd=0 rw bmem=192M@64M hwtypenum=133
imageissue=openpli 9.0-release %h
[gFBDC] no framebuffer available
dmesg
<6>
<6>do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
<6>epc = 76c15fd8 in libpthread-2.33.so[76c0c000+1b000]
<6>ra = 0052ea7c in enigma2[400000+2d5000]
<6>
Edited by Neeam, Today, 15:20.
Re: qviart lunix #30
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted Today, 15:24
If you can connect to the box with PuTTY or WinSCP, it has booted, it has even loaded a working network stack.
Boot or reboot the box, and connect to it with PuTTY.
Check if Enigma is running:
ps | grep enigma | grep -v grep
does it run?
If it does, stop it with
init 4
and check again after 10-15 seconds or so.
Enter the command
dmesg
does it show any errors or other unexpected messages?
Also check
cat /var/log/messages
for errors.
Try starting Enigma manually:
ENIGMA_DEBUG_LVL=4 enigma2
does it terminate with error messages?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #31
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:02
openpli 9.0-release lunix
lunix login: root
Last login: Sun Nov 17 15:47:33 CET 2024 on pts/0
root@lunix:~# ps | grep enigma | grep -v grep
root@lunix:~# grep -v grep
I GET NOTHING
lunix login: root
Last login: Sun Nov 17 15:56:46 CET 2024 on pts/0
root@lunix:~# dmesg
do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
epc = 76611fd8 in libpthread-2.33.so[76608000+1b000]
ra = 0052ea7c in enigma2[400000+2d5000]
Re: qviart lunix #32
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:02
root@lunix:~# cat /var/log/messages
Jan 1 01:00:19 lunix syslog.info syslogd started: BusyBox v1.33.2
Jan 1 01:00:19 lunix user.notice kernel: klogd started: BusyBox v1.33.2 (2024-01-21 11:19:21 UTC)
Jan 1 01:00:19 lunix user.info kernel: Using 512 MB + 0 MB RAM (from CFE)
Jan 1 01:00:19 lunix user.info kernel: bootconsole [early0] enabled
Jan 1 01:00:19 lunix user.info kernel: CPU0 revision is: 0002a065 (Broadcom BMIPS4380)
Jan 1 01:00:19 lunix user.info kernel: FPU revision is: 00130001
Jan 1 01:00:19 lunix user.info kernel: Determined physical RAM map:
Jan 1 01:00:19 lunix user.info kernel: memory: 10000000 @ 00000000 (usable)
Jan 1 01:00:19 lunix user.info kernel: memory: 10000000 @ 20000000 (usable)
Jan 1 01:00:19 lunix user.debug kernel: bmem: adding 55 MB LINUX region at 8 MB (0x0379d000@0x00863000)
Jan 1 01:00:19 lunix user.info kernel: bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
Jan 1 01:00:19 lunix user.debug kernel: bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
Jan 1 01:00:19 lunix user.info kernel: Zone ranges:
Jan 1 01:00:19 lunix user.info kernel: Normal [mem 0x0000000000000000-0x000000002fffffff]
Jan 1 01:00:19 lunix user.info kernel: Movable zone start for each node
Jan 1 01:00:19 lunix user.info kernel: Early memory node ranges
Jan 1 01:00:19 lunix user.info kernel: node 0: [mem 0x0000000000000000-0x000000000fffffff]
Jan 1 01:00:19 lunix user.info kernel: node 0: [mem 0x0000000020000000-0x000000002fffffff]
Jan 1 01:00:19 lunix user.info kernel: Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
Jan 1 01:00:19 lunix user.debug kernel: On node 0 totalpages: 131072
Jan 1 01:00:19 lunix user.debug kernel: Normal zone: 1024 pages used for memmap
Jan 1 01:00:19 lunix user.debug kernel: Normal zone: 0 pages reserved
Jan 1 01:00:19 lunix user.debug kernel: Normal zone: 131072 pages, LIFO batch:31
Jan 1 01:00:19 lunix user.warn kernel: Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Jan 1 01:00:19 lunix user.warn kernel: Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
Jan 1 01:00:19 lunix user.info kernel: PERCPU: Embedded 11 pages/cpu @81407000 s12688 r8192 d24176 u45056
Jan 1 01:00:19 lunix user.debug kernel: pcpu-alloc: s12688 r8192 d24176 u45056 alloc=11*4096
Jan 1 01:00:19 lunix user.debug kernel: pcpu-alloc: [0] 0 [0] 1
Jan 1 01:00:19 lunix user.info kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Jan 1 01:00:19 lunix user.notice kernel: Kernel command line: rootfstype=ubifs root=ubi0:rootfs slab_max_order=0 rootflags=sync ubi.mtd=0 rw bmem=192M@64M hwtypenum=133
Jan 1 01:00:19 lunix user.info kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:19 lunix user.info kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 01:00:19 lunix user.info kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:00:19 lunix user.info kernel: Memory: 314480K/524288K available (6446K kernel code, 357K rwdata, 1416K rodata, 212K init, 139K bss, 209808K reserved, 0K cma-reserved)
Jan 1 01:00:19 lunix user.info kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jan 1 01:00:19 lunix user.info kernel: Hierarchical RCU implementation.
Jan 1 01:00:19 lunix user.info kernel: Build-time adjustment of leaf fanout to 32.
Jan 1 01:00:19 lunix user.info kernel: NR_IRQS:160
Jan 1 01:00:19 lunix user.info kernel: Measuring MIPS counter frequency...
Jan 1 01:00:19 lunix user.info kernel: Detected MIPS clock frequency: 751 MHz (375.751 MHz counter)
Jan 1 01:00:19 lunix user.info kernel: clocksource: wktmr: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
Jan 1 01:00:19 lunix user.info kernel: sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns
Jan 1 01:00:19 lunix user.info kernel: Console: colour dummy device 80x25
Jan 1 01:00:19 lunix user.info kernel: Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
Jan 1 01:00:19 lunix user.info kernel: pid_max: default: 32768 minimum: 301
Jan 1 01:00:19 lunix user.info kernel: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:19 lunix user.info kernel: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:19 lunix user.info kernel: SMP: Booting CPU1...
Jan 1 01:00:19 lunix user.warn kernel: Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Jan 1 01:00:19 lunix user.warn kernel: Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
Jan 1 01:00:19 lunix user.info kernel: CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
Jan 1 01:00:19 lunix user.info kernel: FPU revision is: 00130001
Jan 1 01:00:19 lunix user.info kernel: SMP: CPU1 is running
Jan 1 01:00:19 lunix user.info kernel: Brought up 2 CPUs
Jan 1 01:00:19 lunix user.info kernel: devtmpfs: initialized
Jan 1 01:00:19 lunix user.info kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
Jan 1 01:00:19 lunix user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:19 lunix user.info kernel: USB0: power enable is active low; overcurrent is active low
Jan 1 01:00:19 lunix user.notice kernel: SCSI subsystem initialized
Jan 1 01:00:19 lunix user.debug kernel: libata version 3.00 loaded.
Jan 1 01:00:19 lunix user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 01:00:19 lunix user.info kernel: usbcore: registered new interface driver hub
Jan 1 01:00:19 lunix user.info kernel: usbcore: registered new device driver usb
Jan 1 01:00:19 lunix user.info kernel: Linux video capture interface: v2.00
Jan 1 01:00:19 lunix user.info kernel: Advanced Linux Sound Architecture Driver Initialized.
Jan 1 01:00:19 lunix user.info kernel: clocksource: Switched to clocksource wktmr
Jan 1 01:00:19 lunix user.notice kernel: FS-Cache: Loaded
Jan 1 01:00:19 lunix user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:19 lunix user.info kernel: TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:19 lunix user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:19 lunix user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan 1 01:00:19 lunix user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 01:00:19 lunix user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 01:00:19 lunix user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:19 lunix user.info kernel: RPC: Registered named UNIX socket transport module.
Jan 1 01:00:19 lunix user.info kernel: RPC: Registered udp transport module.
Jan 1 01:00:19 lunix user.info kernel: RPC: Registered tcp transport module.
Jan 1 01:00:19 lunix user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:19 lunix user.info kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
Jan 1 01:00:19 lunix user.notice kernel: NFS: Registering the id_resolver key type
Jan 1 01:00:19 lunix user.notice kernel: Key type id_resolver registered
Jan 1 01:00:19 lunix user.notice kernel: Key type id_legacy registered
Jan 1 01:00:19 lunix user.info kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan 1 01:00:19 lunix user.info kernel: Installing knfsd (copyright © 1996 okir@monad.swb.de).
Jan 1 01:00:19 lunix user.info kernel: ntfs: driver 2.1.32 [Flags: R/O].
Jan 1 01:00:19 lunix user.info kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan 1 01:00:19 lunix user.info kernel: io scheduler noop registered
Jan 1 01:00:19 lunix user.info kernel: io scheduler cfq registered (default)
Jan 1 01:00:19 lunix user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 1 01:00:19 lunix user.info kernel: console [ttyS0] disabled
Jan 1 01:00:19 lunix user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
Jan 1 01:00:19 lunix user.info kernel: console [ttyS0] enabled
Jan 1 01:00:19 lunix user.info kernel: bootconsole [early0] disabled
Jan 1 01:00:19 lunix user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
Jan 1 01:00:19 lunix user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
Jan 1 01:00:19 lunix user.info kernel: loop: module loaded
Jan 1 01:00:19 lunix user.info kernel: ahci ahci.0: SSS flag set, parallel bus scan disabled
Jan 1 01:00:19 lunix user.info kernel: ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
Jan 1 01:00:19 lunix user.info kernel: ahci ahci.0: flags: ncq sntf stag clo slum part
Jan 1 01:00:19 lunix user.info kernel: scsi host0: ahci
Jan 1 01:00:19 lunix user.info kernel: scsi host1: ahci
Jan 1 01:00:19 lunix user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
Jan 1 01:00:19 lunix user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
Jan 1 01:00:19 lunix user.info kernel: brcmstb_nand: NAND controller driver is loaded
Jan 1 01:00:19 lunix user.info kernel: libphy: Fixed MDIO Bus: probed
Jan 1 01:00:19 lunix user.debug kernel: __clk_enable: network [1]
Jan 1 01:00:19 lunix user.debug kernel: __clk_enable: enet [1]
Jan 1 01:00:19 lunix user.debug kernel: bcm7552_pm_genet_enable 00
Jan 1 01:00:19 lunix user.info kernel: bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
Jan 1 01:00:19 lunix user.warn kernel: bcmgenet bcmgenet.0: failed to get enet-eee clock
Jan 1 01:00:19 lunix user.info kernel: libphy: bcmgenet MII bus: probed
Jan 1 01:00:19 lunix user.info kernel: bcmgenet bcmgenet.0: configuring instance for internal PHY
Jan 1 01:00:19 lunix user.info kernel: attached PHY at address 1 [Broadcom BCM7XXX 40nm]
Jan 1 01:00:19 lunix user.debug kernel: __clk_disable: enet [0]
Jan 1 01:00:19 lunix user.debug kernel: bcm7552_pm_genet_disable 00
Jan 1 01:00:19 lunix user.debug kernel: __clk_disable: network [0]
Jan 1 01:00:19 lunix user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:19 lunix user.debug kernel: __clk_enable: usb [1]
Jan 1 01:00:19 lunix user.debug kernel: bcm7552_pm_usb_enable 00
Jan 1 01:00:19 lunix user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
Jan 1 01:00:19 lunix user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
Jan 1 01:00:19 lunix user.info kernel: ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
Jan 1 01:00:19 lunix user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
Jan 1 01:00:19 lunix user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:19 lunix user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 01:00:19 lunix user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 01:00:19 lunix user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
Jan 1 01:00:19 lunix user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
Jan 1 01:00:19 lunix user.info kernel: ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
Jan 1 01:00:19 lunix user.info kernel: ata1: SATA link down (SStatus 0 SControl 300)
Jan 1 01:00:19 lunix user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 01:00:19 lunix user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 01:00:19 lunix user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:19 lunix user.info kernel: mousedev: PS/2 mouse device common for all mice
Jan 1 01:00:19 lunix user.info kernel: i2c /dev entries driver
Jan 1 01:00:19 lunix user.info kernel: sdhci: Secure Digital Host Controller Interface driver
Jan 1 01:00:19 lunix user.info kernel: sdhci: Copyright© Pierre Ossman
Jan 1 01:00:19 lunix user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Jan 1 01:00:19 lunix user.info kernel: hidraw: raw HID events driver © Jiri Kosina
Jan 1 01:00:19 lunix user.info kernel: usbcore: registered new interface driver usbhid
Jan 1 01:00:19 lunix user.info kernel: usbhid: USB HID core driver
Jan 1 01:00:19 lunix user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:19 lunix user.notice kernel: Key type dns_resolver registered
Jan 1 01:00:19 lunix user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor
Jan 1 01:00:19 lunix user.info kernel: EBI CS0: setting up NAND flash (primary)
Jan 1 01:00:19 lunix user.info kernel: nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
Jan 1 01:00:19 lunix user.info kernel: nand: AMD/Spansion S34ML02G1
Jan 1 01:00:19 lunix user.info kernel: nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Jan 1 01:00:19 lunix user.info kernel: nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
Jan 1 01:00:19 lunix user.info kernel: nand: AMD/Spansion S34ML02G1
Jan 1 01:00:19 lunix user.info kernel: nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Jan 1 01:00:19 lunix user.info kernel: brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Jan 1 01:00:19 lunix user.info kernel: Bad block table found at page 131008, version 0x01
Jan 1 01:00:19 lunix user.info kernel: Bad block table found at page 130944, version 0x01
Jan 1 01:00:19 lunix user.notice kernel: Creating 3 MTD partitions on "brcmnand.0":
Jan 1 01:00:19 lunix user.notice kernel: 0x000000540000-0x00000f500000 : "rootfs"
Jan 1 01:00:19 lunix user.notice kernel: 0x000000540000-0x00000f500000 : "rootfs(redundant)"
Jan 1 01:00:19 lunix user.notice kernel: 0x00000f500000-0x00000ff00000 : "kernel"
Jan 1 01:00:19 lunix user.notice kernel: ubi0: attaching mtd0
Jan 1 01:00:19 lunix user.info kernel: ata2: SATA link down (SStatus 0 SControl 300)
Jan 1 01:00:19 lunix user.notice kernel: random: nonblocking pool is initialized
Jan 1 01:00:19 lunix user.notice kernel: ubi0: scanning is finished
Jan 1 01:00:19 lunix user.notice kernel: ubi0: attached mtd0 (name "rootfs", size 239 MiB)
Jan 1 01:00:19 lunix user.notice kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Jan 1 01:00:19 lunix user.notice kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Jan 1 01:00:19 lunix user.notice kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Jan 1 01:00:19 lunix user.notice kernel: ubi0: good PEBs: 1918, bad PEBs: 0, corrupted PEBs: 0
Jan 1 01:00:19 lunix user.notice kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
Jan 1 01:00:19 lunix user.notice kernel: ubi0: max/mean erase counter: 37/7, WL threshold: 4096, image sequence number: 1022329487
Jan 1 01:00:19 lunix user.notice kernel: ubi0: available PEBs: 0, total reserved PEBs: 1918, PEBs reserved for bad PEB handling: 40
Jan 1 01:00:19 lunix user.notice kernel: ubi0: background thread "ubi_bgt0d" started, PID 638
Jan 1 01:00:19 lunix user.info kernel: ALSA device list:
Jan 1 01:00:19 lunix user.info kernel: No soundcards found.
Jan 1 01:00:19 lunix user.notice kernel: UBIFS: parse sync
Jan 1 01:00:19 lunix user.notice kernel: UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 640
Jan 1 01:00:19 lunix user.notice kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
Jan 1 01:00:19 lunix user.notice kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Jan 1 01:00:19 lunix user.notice kernel: UBIFS (ubi0:0): FS size: 236556288 bytes (225 MiB, 1863 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
Jan 1 01:00:19 lunix user.notice kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
Jan 1 01:00:19 lunix user.notice kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47FD58AC-82D1-4B38-82AE-97C41B1FCACC, small LPT model
Jan 1 01:00:19 lunix user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:13.
Jan 1 01:00:19 lunix user.info kernel: devtmpfs: mounted
Jan 1 01:00:19 lunix user.info kernel: Freeing unused kernel memory: 212K (8080b000 - 80840000)
Jan 1 01:00:19 lunix user.info kernel: fuse init (API version 7.23)
Jan 1 01:00:19 lunix user.warn kernel: core: module_layout: kernel tainted.
Jan 1 01:00:19 lunix user.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 01:00:19 lunix user.alert kernel: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == e0d1d66c, ra == e0d1d65c
Jan 1 01:00:19 lunix user.warn kernel: Oops[#1]:
Jan 1 01:00:19 lunix user.warn kernel: CPU: 0 PID: 678 Comm: modprobe Tainted: GF O 4.2.1 #1
Jan 1 01:00:19 lunix user.warn kernel: task: afdbc140 ti: af55e000 task.ti: af55e000
Jan 1 01:00:19 lunix user.warn kernel: $ 0 : 00000000 10008700 00000000 0040412c
Jan 1 01:00:19 lunix user.warn kernel: $ 4 : 00000000 e0f76f20 af55fd08 af55fd04
Jan 1 01:00:19 lunix user.warn kernel: $ 8 : 0000001c 80311234 afcc2000 00000000
Jan 1 01:00:19 lunix user.warn kernel: $12 : 00000001 00000000 00000000 00000000
Jan 1 01:00:19 lunix user.warn kernel: $16 : 00000055 00000055 00000000 00000001
Jan 1 01:00:19 lunix user.warn kernel: $20 : af55fd68 00000000 0000000b 0042f668
Jan 1 01:00:19 lunix user.warn kernel: $24 : 00000001 80311160
Jan 1 01:00:19 lunix user.warn kernel: $28 : af55e000 af55fce8 0042f683 e0d1d65c
Jan 1 01:00:19 lunix user.warn kernel: Hi : 00000070
Jan 1 01:00:19 lunix user.warn kernel: Lo : 00a7faf3
Jan 1 01:00:19 lunix user.warn kernel: epc : e0d1d66c NEXUS_Gpio_P_CheckPinmux+0x34/0x60 [core]
Jan 1 01:00:19 lunix user.warn kernel: ra : e0d1d65c NEXUS_Gpio_P_CheckPinmux+0x24/0x60 [core]
Jan 1 01:00:19 lunix user.warn kernel: Status: 10008703 KERNEL EXL IE
Jan 1 01:00:19 lunix user.warn kernel: Cause : 00800008 (ExcCode 02)
Jan 1 01:00:19 lunix user.warn kernel: BadVA : 00000000
Jan 1 01:00:19 lunix user.warn kernel: PrId : 0002a065 (Broadcom BMIPS4380)
Jan 1 01:00:19 lunix user.warn kernel: Modules linked in: core(OF+) fuse
Jan 1 01:00:19 lunix user.warn kernel: Process modprobe (pid: 678, threadinfo=af55e000, task=afdbc140, tls=7740c800)
Jan 1 01:00:19 lunix user.warn kernel: Stack : e14810e0 80058254 e14810e0 80058254 af55fd00 e0ee8b5c 00000000 0000000f
Jan 1 01:00:19 lunix user.warn kernel: 0040412c 80058254 00000744 e0d1cd68 e14c0000 ada43680 0000001c e0ee8b5c
Jan 1 01:00:19 lunix user.warn kernel: 00000014 e0ee8b5c e1420000 e14c7a38 00000055 00000154 e14cc434 00000001
Jan 1 01:00:19 lunix user.warn kernel: 807c0000 00000000 0000000b e0d1d0ac e0d0d214 e0ee8a5c e14c7a38 0000000b
Jan 1 01:00:19 lunix user.warn kernel: 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000009
Jan 1 01:00:19 lunix user.warn kernel: ...
Jan 1 01:00:19 lunix user.warn kernel: Call Trace:
Jan 1 01:00:19 lunix user.warn kernel: [<e0d1d66c>] NEXUS_Gpio_P_CheckPinmux+0x34/0x60 [core]
Jan 1 01:00:19 lunix user.warn kernel: [<e0d1cd68>] NEXUS_Gpio_OpenAux_impl+0x44/0x33c [core]
Jan 1 01:00:19 lunix user.warn kernel: [<e0d1d0ac>] GPIO_Register_Check.part.1+0x4c/0x80 [core]
Jan 1 01:00:19 lunix user.warn kernel: [<e0d1d534>] tvlite_GPIO_Write+0xac/0xc8 [core]
Jan 1 01:00:19 lunix user.warn kernel: [<e0cf3d4c>] linuxdvb_start+0x108/0x11c [core]
Jan 1 01:00:19 lunix user.warn kernel: [<e156804c>] init_module+0x4c/0x29c [core]
Jan 1 01:00:19 lunix user.warn kernel: [<8000160c>] do_one_initcall+0x1fc/0x210
Jan 1 01:00:19 lunix user.warn kernel: [<80085e14>] do_init_module+0x70/0x1d4
Jan 1 01:00:19 lunix user.warn kernel: [<80087fa4>] SyS_finit_module+0x70/0x88
Jan 1 01:00:19 lunix user.warn kernel: [<80011fd4>] loads_done+0x30/0x54
Jan 1 01:00:19 lunix user.warn kernel: Code: 8fa30020 3c02e14d 8c42bba0 <8c420000> 8c420000 00431021 8c420000 8fa3001c 00431024
Jan 1 01:00:19 lunix user.warn kernel: ---[ end trace 594d045cf6b4fb33 ]---
Jan 1 01:00:19 lunix daemon.info kernel: udevd[704]: starting version 3.2.10
Jan 1 01:00:19 lunix daemon.info kernel: udevd[705]: starting eudev-3.2.10
Jan 1 01:00:19 lunix user.debug kernel: __clk_enable: network [1]
Jan 1 01:00:19 lunix user.debug kernel: __clk_enable: enet [1]
Jan 1 01:00:19 lunix user.debug kernel: bcm7552_pm_genet_enable 00
Jan 1 01:00:19 lunix user.info kernel: bcmgenet bcmgenet.0 eth0: Link is Down
Jan 1 01:00:19 lunix user.info kernel: bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control off
Jan 1 01:00:19 lunix user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Found user 'avahi' (UID 995) and group 'avahi' (GID 995).
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Successfully dropped root privileges.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: avahi-daemon 0.8 starting up.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Successfully called chroot().
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Successfully dropped remaining capabilities.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: No service file found in /etc/avahi/services.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ec6:acff:fe02:c8a0.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: New relevant interface eth0.IPv6 for mDNS.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.103.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: New relevant interface eth0.IPv4 for mDNS.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: New relevant interface lo.IPv6 for mDNS.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: New relevant interface lo.IPv4 for mDNS.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Network interface enumeration completed.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Registering new address record for fe80::ec6:acff:fe02:c8a0 on eth0.*.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Registering new address record for 192.168.0.103 on eth0.IPv4.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Registering new address record for ::1 on lo.*.
Jan 1 01:00:19 lunix daemon.info avahi-daemon[1093]: Registering new address record for 127.0.0.1 on lo.IPv4.
Jan 1 01:00:20 lunix daemon.info avahi-daemon[1093]: Server startup complete. Host name is lunix.local. Local service cookie is 1716827730.
Jan 1 01:00:21 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Jan 1 01:00:21 lunix user.info kernel: epc = 76ccdfd8 in libpthread-2.33.so[76cc4000+1b000]
Jan 1 01:00:21 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Jan 1 01:00:22 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Jan 1 01:00:22 lunix user.info kernel: epc = 769e1fd8 in libpthread-2.33.so[769d8000+1b000]
Jan 1 01:00:22 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Jan 1 01:00:23 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Jan 1 01:00:23 lunix user.info kernel: epc = 769adfd8 in libpthread-2.33.so[769a4000+1b000]
Jan 1 01:00:23 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:23 lunix daemon.notice ntpdate[997]: step time server 59.103.236.9 offset +1731854220.086776 sec
Nov 17 15:37:24 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:24 lunix user.info kernel: epc = 76f75fd8 in libpthread-2.33.so[76f6c000+1b000]
Nov 17 15:37:24 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:25 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:25 lunix user.info kernel: epc = 76c25fd8 in libpthread-2.33.so[76c1c000+1b000]
Nov 17 15:37:25 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:25 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:25 lunix user.info kernel: epc = 76d8dfd8 in libpthread-2.33.so[76d84000+1b000]
Nov 17 15:37:25 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:26 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:26 lunix user.info kernel: epc = 76729fd8 in libpthread-2.33.so[76720000+1b000]
Nov 17 15:37:26 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:27 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:27 lunix user.info kernel: epc = 767edfd8 in libpthread-2.33.so[767e4000+1b000]
Nov 17 15:37:27 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:28 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:28 lunix user.info kernel: epc = 76231fd8 in libpthread-2.33.so[76228000+1b000]
Nov 17 15:37:28 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:29 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:29 lunix user.info kernel: epc = 760c5fd8 in libpthread-2.33.so[760bc000+1b000]
Nov 17 15:37:29 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:29 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:29 lunix user.info kernel: epc = 766b5fd8 in libpthread-2.33.so[766ac000+1b000]
Nov 17 15:37:29 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:30 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:30 lunix user.info kernel: epc = 76d45fd8 in libpthread-2.33.so[76d3c000+1b000]
Nov 17 15:37:30 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:31 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:37:31 lunix user.info kernel: epc = 765edfd8 in libpthread-2.33.so[765e4000+1b000]
Nov 17 15:37:31 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:37:31 lunix daemon.info init: Id "gui" respawning too fast: disabled for 5 minutes
Nov 17 15:37:31 lunix daemon.info init: no more processes left in this runlevel
Nov 17 15:38:00 lunix cron.info crond[1038]: time disparity of 28864237 minutes detected
Nov 17 15:38:38 lunix authpriv.debug login[1159]: pam_unix(login:auth): user [root] has blank password; authenticated without it
Nov 17 15:38:38 lunix authpriv.notice login[1159]: pam_lastlog(login:session): file /var/log/lastlog created
Nov 17 15:38:38 lunix authpriv.info login[1159]: pam_unix(login:session): session opened for user root(uid=0) by LOGIN(uid=0)
Nov 17 15:38:38 lunix authpriv.notice login[1160]: ROOT LOGIN on '/dev/pts/0' from '192.168.0.105:60979'
Nov 17 15:42:33 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:33 lunix user.info kernel: epc = 767ddfd8 in libpthread-2.33.so[767d4000+1b000]
Nov 17 15:42:33 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:34 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:34 lunix user.info kernel: epc = 76b85fd8 in libpthread-2.33.so[76b7c000+1b000]
Nov 17 15:42:34 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:35 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:35 lunix user.info kernel: epc = 76ccdfd8 in libpthread-2.33.so[76cc4000+1b000]
Nov 17 15:42:35 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:35 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:35 lunix user.info kernel: epc = 760c9fd8 in libpthread-2.33.so[760c0000+1b000]
Nov 17 15:42:35 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:36 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:36 lunix user.info kernel: epc = 76dd5fd8 in libpthread-2.33.so[76dcc000+1b000]
Nov 17 15:42:36 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:37 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:37 lunix user.info kernel: epc = 77029fd8 in libpthread-2.33.so[77020000+1b000]
Nov 17 15:42:37 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:38 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:38 lunix user.info kernel: epc = 760adfd8 in libpthread-2.33.so[760a4000+1b000]
Nov 17 15:42:38 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:39 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:39 lunix user.info kernel: epc = 76305fd8 in libpthread-2.33.so[762fc000+1b000]
Nov 17 15:42:39 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:39 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:39 lunix user.info kernel: epc = 76efdfd8 in libpthread-2.33.so[76ef4000+1b000]
Nov 17 15:42:39 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:40 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:42:40 lunix user.info kernel: epc = 76861fd8 in libpthread-2.33.so[76858000+1b000]
Nov 17 15:42:40 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:42:40 lunix daemon.info init: Id "gui" respawning too fast: disabled for 5 minutes
Nov 17 15:43:26 lunix authpriv.debug login[1206]: pam_unix(login:auth): user [root] has blank password; authenticated without it
Nov 17 15:43:26 lunix authpriv.info login[1206]: pam_unix(login:session): session opened for user root(uid=0) by LOGIN(uid=0)
Nov 17 15:43:26 lunix authpriv.notice login[1207]: ROOT LOGIN on '/dev/pts/0' from '192.168.0.105:60997'
Nov 17 15:44:51 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:44:51 lunix user.info kernel: epc = 764c5fd8 in libpthread-2.33.so[764bc000+1b000]
Nov 17 15:44:51 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:33 lunix authpriv.debug login[1511]: pam_unix(login:auth): user [root] has blank password; authenticated without it
Nov 17 15:47:33 lunix authpriv.info login[1511]: pam_unix(login:session): session opened for user root(uid=0) by LOGIN(uid=0)
Nov 17 15:47:33 lunix authpriv.notice login[1512]: ROOT LOGIN on '/dev/pts/0' from '192.168.0.105:61014'
Nov 17 15:47:42 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:42 lunix user.info kernel: epc = 76091fd8 in libpthread-2.33.so[76088000+1b000]
Nov 17 15:47:42 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:43 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:43 lunix user.info kernel: epc = 7663dfd8 in libpthread-2.33.so[76634000+1b000]
Nov 17 15:47:43 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:44 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:44 lunix user.info kernel: epc = 76a21fd8 in libpthread-2.33.so[76a18000+1b000]
Nov 17 15:47:44 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:44 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:44 lunix user.info kernel: epc = 76725fd8 in libpthread-2.33.so[7671c000+1b000]
Nov 17 15:47:44 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:45 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:45 lunix user.info kernel: epc = 762d1fd8 in libpthread-2.33.so[762c8000+1b000]
Nov 17 15:47:45 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:46 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:46 lunix user.info kernel: epc = 7655dfd8 in libpthread-2.33.so[76554000+1b000]
Nov 17 15:47:46 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:47 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:47 lunix user.info kernel: epc = 765a5fd8 in libpthread-2.33.so[7659c000+1b000]
Nov 17 15:47:47 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:48 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:48 lunix user.info kernel: epc = 76909fd8 in libpthread-2.33.so[76900000+1b000]
Nov 17 15:47:48 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:48 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:48 lunix user.info kernel: epc = 76f19fd8 in libpthread-2.33.so[76f10000+1b000]
Nov 17 15:47:48 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:49 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:47:49 lunix user.info kernel: epc = 760bdfd8 in libpthread-2.33.so[760b4000+1b000]
Nov 17 15:47:49 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:47:49 lunix daemon.info init: Id "gui" respawning too fast: disabled for 5 minutes
Nov 17 15:49:19 lunix authpriv.debug login[1558]: pam_unix(login:auth): user [root] has blank password; authenticated without it
Nov 17 15:49:19 lunix authpriv.info login[1558]: pam_unix(login:session): session opened for user root(uid=0) by LOGIN(uid=0)
Nov 17 15:49:19 lunix authpriv.notice login[1559]: ROOT LOGIN on '/dev/pts/0' from '192.168.0.105:61024'
Nov 17 15:52:51 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:51 lunix user.info kernel: epc = 76999fd8 in libpthread-2.33.so[76990000+1b000]
Nov 17 15:52:51 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:52 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:52 lunix user.info kernel: epc = 7627dfd8 in libpthread-2.33.so[76274000+1b000]
Nov 17 15:52:52 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:53 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:53 lunix user.info kernel: epc = 764adfd8 in libpthread-2.33.so[764a4000+1b000]
Nov 17 15:52:53 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:53 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:53 lunix user.info kernel: epc = 767b9fd8 in libpthread-2.33.so[767b0000+1b000]
Nov 17 15:52:53 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:54 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:54 lunix user.info kernel: epc = 76419fd8 in libpthread-2.33.so[76410000+1b000]
Nov 17 15:52:54 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:55 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:55 lunix user.info kernel: epc = 761a5fd8 in libpthread-2.33.so[7619c000+1b000]
Nov 17 15:52:55 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:56 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:56 lunix user.info kernel: epc = 768f5fd8 in libpthread-2.33.so[768ec000+1b000]
Nov 17 15:52:56 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:56 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:56 lunix user.info kernel: epc = 76a6dfd8 in libpthread-2.33.so[76a64000+1b000]
Nov 17 15:52:57 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:57 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:57 lunix user.info kernel: epc = 7670dfd8 in libpthread-2.33.so[76704000+1b000]
Nov 17 15:52:57 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:58 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:52:58 lunix user.info kernel: epc = 76275fd8 in libpthread-2.33.so[7626c000+1b000]
Nov 17 15:52:58 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:52:58 lunix daemon.info init: Id "gui" respawning too fast: disabled for 5 minutes
Nov 17 15:56:46 lunix authpriv.debug login[1612]: pam_unix(login:auth): user [root] has blank password; authenticated without it
Nov 17 15:56:46 lunix authpriv.info login[1612]: pam_unix(login:session): session opened for user root(uid=0) by LOGIN(uid=0)
Nov 17 15:56:46 lunix authpriv.notice login[1613]: ROOT LOGIN on '/dev/pts/0' from '192.168.0.105:61063'
Nov 17 15:58:00 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:00 lunix user.info kernel: epc = 76471fd8 in libpthread-2.33.so[76468000+1b000]
Nov 17 15:58:00 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:01 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:01 lunix user.info kernel: epc = 762e9fd8 in libpthread-2.33.so[762e0000+1b000]
Nov 17 15:58:01 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:02 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:02 lunix user.info kernel: epc = 76d85fd8 in libpthread-2.33.so[76d7c000+1b000]
Nov 17 15:58:02 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:02 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:02 lunix user.info kernel: epc = 76ea1fd8 in libpthread-2.33.so[76e98000+1b000]
Nov 17 15:58:02 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:03 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:03 lunix user.info kernel: epc = 76b69fd8 in libpthread-2.33.so[76b60000+1b000]
Nov 17 15:58:03 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:04 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:04 lunix user.info kernel: epc = 765d9fd8 in libpthread-2.33.so[765d0000+1b000]
Nov 17 15:58:04 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:05 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:05 lunix user.info kernel: epc = 76f69fd8 in libpthread-2.33.so[76f60000+1b000]
Nov 17 15:58:05 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:05 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:05 lunix user.info kernel: epc = 764e5fd8 in libpthread-2.33.so[764dc000+1b000]
Nov 17 15:58:05 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:06 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:06 lunix user.info kernel: epc = 7674dfd8 in libpthread-2.33.so[76744000+1b000]
Nov 17 15:58:06 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:07 lunix user.info kernel: do_page_fault(): sending SIGSEGV to enigma2 for invalid read access from 0000001c
Nov 17 15:58:07 lunix user.info kernel: epc = 76611fd8 in libpthread-2.33.so[76608000+1b000]
Nov 17 15:58:07 lunix user.info kernel: ra = 0052ea7c in enigma2[400000+2d5000]
Nov 17 15:58:07 lunix daemon.info init: Id "gui" respawning too fast: disabled for 5 minutes
Nov 17 15:59:08 lunix authpriv.debug login[1665]: pam_unix(login:auth): user [root] has blank password; authenticated without it
Nov 17 15:59:08 lunix authpriv.info login[1665]: pam_unix(login:session): session opened for user root(uid=0) by LOGIN(uid=0)
Nov 17 15:59:09 lunix authpriv.notice login[1666]: ROOT LOGIN on '/dev/pts/0' from '192.168.0.105:61081'
root@lunix:~#
Re: qviart lunix #33
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:04
openpli 9.0-release lunix
lunix login: root
Last login: Sun Nov 17 15:59:08 CET 2024 on pts/0
root@lunix:~# ENIGMA_DEBUG_LVL=4 enigma2
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 11
ENIGMA_DEBUG_LVL=4
[Avahi] avahi_timeout_new
[Avahi] avahi_watch_new(3 0x1)
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] client state: 2
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
[bcm] /dev/fb0 No such file or directory
[eInit] + (9) Font Render Class
[Font] Initializing lib.
[Font] Loading fonts.
[Font] Intializing font cache, using max. 4MB.
[eInit] + (9) gLCD
[eFbLCD] /dev/fb1: No such file or directory
[eFbLCD] framebuffer /dev/fb1 not available
[eDboxLCD] No oled0 or lcd0 device found!
[gLCDDC] resolution: -1x-1x0 stride=0
[eInit] + (9) GFBDC
[fb] /dev/fb0 No such file or directory
[fb] framebuffer /dev/fb0 not available
[gFBDC] no framebuffer available
Segmentation fault
root@lunix:~#
Re: qviart lunix #34
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted Today, 16:08
My first reaction would be: box with broken RAM memory.
But lets rule out damaged files in flash first. Please do
opkg update
to make sure your opkg index files are up to date.
Then do
opkg list-installed | while read f; do opkg install ${f%% *} --force-reinstall; done
( copy and paste as 1 line ! )
This will force a reinstallation of every package currently installed, overwriting any corrupted files. This may take a while. When done, reboot the box, and see if it made a difference.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #35
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:09
root@lunix:/tmp# cd /
root@lunix:/# cd /tmp
root@lunix:/tmp# opkg install
opkg: the ``install'' command requires at least one argument
usage: opkg [options...] sub-command [arguments...]
where sub-command is one of:
Package Manipulation:
update Update list of available packages
upgrade Upgrade installed packages
dist-upgrade Upgrade operation that allows package re moval (libsolv backend)
install <pkgs> Install package(s)
configure <pkgs> Configure unpacked package(s)
remove <pkgs|glob> Remove package(s)
clean Clean internal cache
flag <flag> <pkgs> Flag package(s)
<flag>=hold|noprune|user|ok|installed|unpacked (one per invocation)
Informational Commands:
list List available packages
list-installed List installed packages
list-upgradable List installed and upgradable packages
list-changed-conffiles List user modified configuration files
files <pkg> List files belonging to <pkg>
search <file|glob> List package providing <file>
find <regexp> List packages with names or description matching <regexp>
info [pkg|glob] Display all info for <pkg>
status [pkg|glob] Display all status for <pkg>
download <pkg> Download <pkg> to current directory
compare-versions <v1> <op> <v2>
compare versions using <= < > >= = << >>
print-architecture List installable package architectures
depends [-A] [pkgname|glob]+
whatdepends [-A] [pkgname|glob]+
whatdependsrec [-A] [pkgname|glob]+
whatrecommends[-A] [pkgname|glob]+
whatsuggests[-A] [pkgname|glob]+
whatprovides [-A] [pkgname|glob]+
whatconflicts [-A] [pkgname|glob]+
whatreplaces [-A] [pkgname|glob]+
verify [pkg|glob] Verifies the intrgrity of <pkg>, or all packages if omitted by
comparing the md5sum of each file with t he information stored
on the opkg metadata database
-v, --version Print version
Options:
-A Query all packages not just those instal led
-V[<level>] Set verbosity level to <level>.
--verbosity[=<level>] Verbosity levels:
0 errors only
1 normal messages (default)
2 informative messages
3 debug
4 debug level 2
-f <conf_file> Use <conf_file> as the opkg configuratio n file
--conf <conf_file>
--cache-dir <path> Specify cache directory.
-t, --tmp-dir <directory> Specify tmp-dir.
-l, --lists-dir <directory> Specify lists-dir.
-d <dest_name> Use <dest_name> as the the root director y for
--dest <dest_name> package installation, removal, upgrading .
<dest_name> should be a defined dest nam e from
the configuration file, (but can also be a
directory name in a pinch).
-o <dir> Use <dir> as the root directory for
--offline-root <dir> offline installation of packages.
--add-dest <name>:<path> Register destination with given path
--add-arch <arch>:<prio> Register architecture with given priorit y
--add-exclude <name> Register package to be excluded from ins tall
--add-ignore-recommends <name> Register package to be ignored as a reco mendee
--prefer-arch-to-version Use the architecture priority package ra ther
than the higher version one if more
than one candidate is found.
--combine Combine upgrade and install operations, this
may be needed to resolve dependency issu es.
Only available for the internal solver b ackend.
--fields <field1>,<field2> Limit display information to the specifi ed fields
plus the package name. Valid for info an d status.
--short-description Display only the first line of the descr iption.
--size Print package size when listing availabl e packages
Force Options:
--force-depends Install/remove despite failed dependenci es
--force-maintainer Overwrite preexisting config files
--force-reinstall Reinstall package(s)
--force-overwrite Overwrite files from other package(s)
--force-downgrade Allow opkg to downgrade packages
--force-space Disable free space checks
--force-postinstall Run postinstall scripts even in offline mode
--force-remove Remove package even if prerm script fail s
--force-checksum Don't fail on checksum mismatches
--noaction No action -- test only
--download-only No action -- download only
--nodeps Do not follow dependencies
--no-install-recommends Do not install any recommended packages
--force-removal-of-dependent-packages
Remove package and all dependencies
--autoremove Remove packages that were installed
automatically to satisfy dependencies
--host-cache-dir Don't place cache in offline root dir.
--volatile-cache Use volatile cache.
Volatile cache will be cleared on exit
glob could be something like 'pkgname*' '*file*' or similar
e.g. opkg info 'libstd*' or opkg search '*libop*' or opkg remove 'libncur*'
root@lunix:/tmp# opkg update
Downloading http://downloads.ope...3rd-party/Packa ges.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.ope...3rd-party-lunix /Packages.gz.
Updated source 'openpli-3rd-party-lunix'.
Downloading http://downloads.ope...3rd-party-mips3 2el/Packages.gz.
Updated source 'openpli-3rd-party-mips32el'.
Downloading http://downloads.ope...all/Packages.gz .
Updated source 'openpli-all'.
Downloading http://downloads.ope.../lunix/Packages. gz.
Updated source 'openpli-lunix'.
Downloading http://downloads.ope...mips32el/Packag es.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.ope...picons/Packages .gz.
Updated source 'openpli-picons'.
root@lunix:/tmp# opkg upgrade
Upgrading gstreamer1.0-plugins-bad-rtmp (1.20.5-r0.0) to gstreamer1.0-plugins-ba d-rtmp (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-rtmp_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-extensions-mediascanner (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-extensions-mediascanner (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-extensions-mediascanner_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading openpli-bootlogo (20241027-r0.129) to openpli-bootlogo (20241110) on r oot
Downloading http://downloads.ope...mips32el/openpl i-bootlogo_20241110-r0.132_mips32el.ipk.
/dev/dvb/adapter0/video0: No such file or directory
update-rc.d: /etc/init.d/bootlogo exists during rc.d purge (continuing)
Removing any system startup links for bootlogo ...
/etc/rcS.d/S21bootlogo
Upgrading enigma2-plugin-extensions-pictureplayer (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-extensions-pictureplayer (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-extensions-pictureplayer_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading libgstmpegts-1.0-0 (1.20.5-r0.0) to libgstmpegts-1.0-0 (1.20.5) on roo t
Downloading http://downloads.ope...mips32el/libgst mpegts-1.0-0_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-systemplugins-fastscan (3.9+git20902+81e8a63-r0.2) to e nigma2-plugin-systemplugins-fastscan (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-fastscan_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-systemplugins-hotplug (3.9+git20902+81e8a63-r0.2) to en igma2-plugin-systemplugins-hotplug (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-hotplug_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading gstreamer1.0-plugins-bad-mpegpsdemux (1.20.5-r0.0) to gstreamer1.0-plu gins-bad-mpegpsdemux (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-mpegpsdemux_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-systemplugins-cablescan (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-systemplugins-cablescan (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-cablescan_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-systemplugins-wirelesslan (3.9+git20902+81e8a63-r0.2) t o enigma2-plugin-systemplugins-wirelesslan (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-wirelesslan_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading gstreamer1.0-plugins-bad-faad (1.20.5-r0.0) to gstreamer1.0-plugins-ba d-faad (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-faad_1.20.5-r0.1_mips32el.ipk.
Upgrading gstreamer1.0-plugins-bad-opusparse (1.20.5-r0.0) to gstreamer1.0-plugi ns-bad-opusparse (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-opusparse_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-systemplugins-osd3dsetup (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-systemplugins-osd3dsetup (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-osd3dsetup_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading libgstisoff-1.0-0 (1.20.5-r0.0) to libgstisoff-1.0-0 (1.20.5) on root
Downloading http://downloads.ope...mips32el/libgst isoff-1.0-0_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-extensions-cutlisteditor (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-extensions-cutlisteditor (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-extensions-cutlisteditor_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading libgstcodecparsers-1.0-0 (1.20.5-r0.0) to libgstcodecparsers-1.0-0 (1. 20.5) on root
Downloading http://downloads.ope...mips32el/libgst codecparsers-1.0-0_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-systemplugins-positionersetup (3.9+git20902+81e8a63-r0. 2) to enigma2-plugin-systemplugins-positionersetup (3.9+git20902+81e8a63) on roo t
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-positionersetup_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-fonts (2020.10.17-r0.2) to enigma2-fonts (2020.10.17) on root
Downloading http://downloads.ope...lunix/enigma2-f onts_2020.10.17-r0.4_lunix.ipk.
Upgrading gstreamer1.0-plugins-bad-autoconvert (1.20.5-r0.0) to gstreamer1.0-plu gins-bad-autoconvert (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-autoconvert_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-systemplugins-videomode (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-systemplugins-videomode (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-videomode_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-systemplugins-osdpositionsetup (3.9+git20902+81e8a63-r0 .2) to enigma2-plugin-systemplugins-osdpositionsetup (3.9+git20902+81e8a63) on r oot
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-osdpositionsetup_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading tuxbox-common (3+git820+63d2ec6-r0.0) to tuxbox-common (3+git834+be0fd 3e) on root
Downloading http://downloads.ope...all/tuxbox-comm on_3+git834+be0fd3e-r0.0_all.ipk.
Upgrading enigma2-plugin-extensions-mediaplayer (3.9+git20902+81e8a63-r0.2) to e nigma2-plugin-extensions-mediaplayer (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-extensions-mediaplayer_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-systemplugins-hdmicec (3.9+git20902+81e8a63-r0.2) to en igma2-plugin-systemplugins-hdmicec (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-hdmicec_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-extensions-graphmultiepg (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-extensions-graphmultiepg (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-extensions-graphmultiepg_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading libgsturidownloader-1.0-0 (1.20.5-r0.0) to libgsturidownloader-1.0-0 ( 1.20.5) on root
Downloading http://downloads.ope...mips32el/libgst uridownloader-1.0-0_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2-plugin-systemplugins-satfinder (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-systemplugins-satfinder (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-satfinder_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-systemplugins-videotune (3.9+git20902+81e8a63-r0.2) to enigma2-plugin-systemplugins-videotune (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-videotune_3.9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading gstreamer1.0-plugins-bad-videoparsersbad (1.20.5-r0.0) to gstreamer1.0 -plugins-bad-videoparsersbad (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-videoparsersbad_1.20.5-r0.1_mips32el.ipk.
Upgrading gstreamer1.0-plugins-bad-mpegtsdemux (1.20.5-r0.0) to gstreamer1.0-plu gins-bad-mpegtsdemux (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-mpegtsdemux_1.20.5-r0.1_mips32el.ipk.
Upgrading libgstadaptivedemux-1.0-0 (1.20.5-r0.0) to libgstadaptivedemux-1.0-0 ( 1.20.5) on root
Downloading http://downloads.ope...mips32el/libgst adaptivedemux-1.0-0_1.20.5-r0.1_mips32el.ipk.
Upgrading gstreamer1.0-plugins-bad-dash (1.20.5-r0.0) to gstreamer1.0-plugins-ba d-dash (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-dash_1.20.5-r0.1_mips32el.ipk.
Upgrading gstreamer1.0-plugins-bad-smoothstreaming (1.20.5-r0.0) to gstreamer1.0 -plugins-bad-smoothstreaming (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-smoothstreaming_1.20.5-r0.1_mips32el.ipk.
Upgrading gstreamer1.0-plugins-bad-hls (1.20.5-r0.0) to gstreamer1.0-plugins-bad -hls (1.20.5) on root
Downloading http://downloads.ope...mips32el/gstrea mer1.0-plugins-bad-hls_1.20.5-r0.1_mips32el.ipk.
Upgrading enigma2 (3.9+git20902+81e8a63-r0.2) to enigma2 (3.9+git20902+81e8a63) on root
Downloading http://downloads.ope...lunix/enigma2_3 .9+git20902+81e8a63-r0.4_lunix.ipk.
Upgrading enigma2-plugin-systemplugins-servicemp3 (git48+837df79-r0.73) to enigm a2-plugin-systemplugins-servicemp3 (git48+837df79) on root
Downloading http://downloads.ope...lunix/enigma2-p lugin-systemplugins-servicemp3_git48+837df79-r0.75_lunix.ipk.
Configuring libgstcodecparsers-1.0-0.
Configuring libgstmpegts-1.0-0.
Configuring gstreamer1.0-plugins-bad-mpegtsdemux.
Configuring libgsturidownloader-1.0-0.
Configuring libgstadaptivedemux-1.0-0.
Configuring gstreamer1.0-plugins-bad-hls.
Configuring gstreamer1.0-plugins-bad-videoparsersbad.
Configuring gstreamer1.0-plugins-bad-rtmp.
Configuring enigma2-plugin-extensions-mediascanner.
Configuring openpli-bootlogo.
Adding system startup for /etc/init.d/bootlogo.
Configuring enigma2-plugin-extensions-pictureplayer.
Configuring libgstisoff-1.0-0.
Configuring gstreamer1.0-plugins-bad-smoothstreaming.
Configuring enigma2-plugin-systemplugins-fastscan.
Configuring enigma2-plugin-systemplugins-hotplug.
Configuring gstreamer1.0-plugins-bad-mpegpsdemux.
Configuring enigma2-plugin-systemplugins-cablescan.
Configuring enigma2-plugin-systemplugins-wirelesslan.
Configuring gstreamer1.0-plugins-bad-faad.
Configuring gstreamer1.0-plugins-bad-opusparse.
Configuring enigma2-plugin-systemplugins-osd3dsetup.
Configuring enigma2-plugin-extensions-cutlisteditor.
Configuring enigma2-plugin-systemplugins-positionersetup.
Configuring enigma2-fonts.
Configuring gstreamer1.0-plugins-bad-autoconvert.
Configuring enigma2-plugin-systemplugins-videomode.
Configuring enigma2-plugin-systemplugins-osdpositionsetup.
Configuring tuxbox-common.
Configuring gstreamer1.0-plugins-bad-dash.
Configuring enigma2-plugin-systemplugins-servicemp3.
Configuring enigma2.
Configuring enigma2-plugin-extensions-mediaplayer.
Configuring enigma2-plugin-systemplugins-hdmicec.
Configuring enigma2-plugin-extensions-graphmultiepg.
Configuring enigma2-plugin-systemplugins-satfinder.
Configuring enigma2-plugin-systemplugins-videotune.
root@lunix:/tmp# cd /
root@lunix:/# reboot
Broadcast message from root@lunix (pts/0) (Thu Nov 14 13:25:14 2024):
The system is going down for reboot NOW!
root@lunix:/#
Re: qviart lunix #36
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted Today, 16:11
That was not what I asked you to do.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #37
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:12
root@lunix:~# opkg update
Downloading http://downloads.ope...rty/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.ope...nix/Packages.gz.
Updated source 'openpli-3rd-party-lunix'.
Downloading http://downloads.ope...2el/Packages.gz.
Updated source 'openpli-3rd-party-mips32el'.
Downloading http://downloads.ope...all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.ope...nix/Packages.gz.
Updated source 'openpli-lunix'.
Downloading http://downloads.ope...2el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.ope...ons/Packages.gz.
Updated source 'openpli-picons'.
root@lunix:~#
Re: qviart lunix #38
-
- PLi® Core member
- 70,426 posts
+1,808
Excellent
Posted Today, 16:16
I've already seen that, the point was the second command, to reinstall everything. If this works you'll have your box back without any data loss, if this doesn't work, flashing from the commandline is the next step.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: qviart lunix #39
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:36
For 7-8 minutes everything was getting updated then there is bad addrees download Fail
Installing busybox-cron (1.33.2) on root
stopping Busybox Periodic Command Scheduler: crond... stopped crond (pid 1037)
done.
update-rc.d: /etc/init.d/busybox-cron exists during rc.d purge (continuing)
Removing any system startup links for busybox-cron ...
/etc/rc0.d/K20busybox-cron
/etc/rc1.d/K20busybox-cron
/etc/rc2.d/S20busybox-cron
/etc/rc3.d/S20busybox-cron
/etc/rc4.d/S20busybox-cron
/etc/rc5.d/S20busybox-cron
/etc/rc6.d/K20busybox-cron
Configuring busybox-cron.
Adding system startup for /etc/init.d/busybox-cron.
starting Busybox Periodic Command Scheduler: crond... done.
Downloading http://downloads.ope....1_mips32el.ipk.
Installing busybox-inetd (1.33.2) on root
Stopping internet superserver: inetd.
update-rc.d: /etc/init.d/inetd.busybox exists during rc.d purge (continuing)
Removing any system startup links for inetd.busybox ...
/etc/rc0.d/K20inetd.busybox
/etc/rc1.d/K20inetd.busybox
/etc/rc2.d/S20inetd.busybox
/etc/rc3.d/S20inetd.busybox
/etc/rc4.d/S20inetd.busybox
/etc/rc5.d/S20inetd.busybox
/etc/rc6.d/K20inetd.busybox
Configuring busybox-inetd.
Adding system startup for /etc/init.d/inetd.busybox.
Starting internet superserver: inetd.
Downloading http://downloads.ope....1_mips32el.ipk.
Installing busybox-syslog (1.33.2) on root
Stopping syslogd/klogd: stopped syslogd (pid 1081)
stopped klogd (pid 1084)
done
update-alternatives: removing /sbin/klogd as no more alternatives exist for it
update-alternatives: removing /sbin/syslogd as no more alternatives exist for it
Stopping syslogd/klogd: no syslogd found; none killed
update-rc.d: /etc/init.d/syslog exists during rc.d purge (continuing)
Removing any system startup links for syslog ...
/etc/rc0.d/K20syslog
/etc/rc1.d/K20syslog
/etc/rc2.d/S20syslog
/etc/rc3.d/S20syslog
/etc/rc4.d/S20syslog
/etc/rc5.d/S20syslog
/etc/rc6.d/K20syslog
Configuring busybox-syslog.
update-alternatives: Linking /sbin/klogd to /bin/busybox.nosuid
update-alternatives: Linking /sbin/syslogd to /bin/busybox.nosuid
Adding system startup for /etc/init.d/syslog.
Starting syslogd/klogd: done
Downloading http://downloads.ope....1_mips32el.ipk.
Installing busybox-udhcpc (1.33.2) on root
Configuring busybox-udhcpc.
Downloading http://downloads.ope...16-r0.0_all.ipk.
Installing ca-certificates (20211016) on root
Configuring ca-certificates.
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Downloading http://downloads.ope....0_mips32el.ipk.
Installing cifs-utils (6.13) on root
Configuring cifs-utils.
Downloading http://downloads.ope....0_mips32el.ipk.
Installing dbus-1 (1.12.20) on root
Stopping system message bus: dbus.
rm: can't remove '/var/run/dbus/pid': No such file or directory
update-rc.d: /etc/init.d/dbus-1 exists during rc.d purge (continuing)
Removing any system startup links for dbus-1 ...
/etc/rc0.d/K20dbus-1
/etc/rc1.d/K20dbus-1
/etc/rc2.d/S02dbus-1
/etc/rc3.d/S02dbus-1
/etc/rc5.d/S02dbus-1
/etc/rc6.d/K20dbus-1
Configuring dbus-1.
Adding system startup for /etc/init.d/dbus-1.
Starting system message bus: dbus.
Downloading http://downloads.ope....0_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....0_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope....0_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....0_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope...-r6.0_lunix.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope...-r6.0_lunix.ipk, wget returned 1.
Downloading http://downloads.ope....0_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....0_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope....0_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....0_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope....0_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....0_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope....0_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....0_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope...-r0.4_lunix.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope...-r0.4_lunix.ipk, wget returned 1.
Downloading http://downloads.ope...-r0.4_lunix.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope...-r0.4_lunix.ipk, wget returned 1.
Downloading http://downloads.ope....2_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....2_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope....1_mips32el.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope....1_mips32el.ipk, wget returned 1.
Downloading http://downloads.ope...-r0.4_lunix.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope...-r0.4_lunix.ipk, wget returned 1.
Downloading http://downloads.ope...-r0.4_lunix.ipk.
wget: bad address 'downloads.openpli.org'
* opkg_download_backend: Failed to download http://downloads.ope...-r0.4_lunix.ipk, wget returned 1.
Re: qviart lunix #40
-
- Member
- 11 posts
0
Neutral
Posted Today, 16:39
i rebooted, same result, still hanged on boot logo, i dont want any backup as i dont have anything in my previous image, i just want a clean intall of new image, I have a Uart, is it possible to flash Image Bin file Via UART, I know the pin connection.
3 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
-
Google (1)
